• Journal of the Korean Society for Precision Engineering
• /
• v.9 no.3
• /
• pp.132-139
• /
• 1992

본 연구에서 디지탈 적응제어 시스템 설계를 위한 마이크로 컴퓨터 지원설계기법과 프로그램(DACS)을 개발 하였다. 이 프로그램은 Intel 80286 ghrdms 80386 CPU에 사용되는 GWBASIC 언어로 작성 되었고, 각 요소의 동특성을 모듈화 시키고, 차분방정식으로 표시하는 시뮬레이션 기법을 제시 하였다. 이 프로그램을 사용하면 디지탈제어에서 중요한 샘플링 시간과 A/D, D/A 변환기의 최적 Bit수를 결정할 수 있다. 적응제어 방법은 온라인 RLS(Recursive Least Squares) 파라메터 추정방법을 사용하였고, 실험결과와 잘 일치 되었다. 예제로서 공기예열시스템에 적응제어방법을 적용시켜 설계하다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.5 no.4
• /
• pp.249-254
• /
• 2005

This paper presents a system-on-a-chip (SOC) design for digital TV. The single LSI incorporates almost all essential parts such as CPU, ISO/IEC 11172/13818 system/audio/video decoders, a video post-processor, a graphics/OSD processor and a display processor. It has analog IP's inside such as video DACs, an audio PLL, and a system PLL to reduce the system-level implementation cost. Descramblers and Smart Card interface are included to support widely used conditional access systems. The video decoder can decode two video streams simultaneously. The DSP-based audio decoder can process various audio coding specifications. The functional blocks for video quality enhancement also form outstanding features of this SoC. The SoC supports world-wide major DTV services including ATSC, ARIB, DVB, and DIRECTV.

• Earthquakes and Structures
• /
• v.1 no.1
• /
• pp.21-41
• /
• 2010

Multi-span steel-concrete composite (SCC) bridges are very sensitive to earthquake loading. Extensive damage may occur not only in the substructures (piers), which are expected to yield, but also in the other components (e.g., deck, abutments) involved in carrying the seismic loads. Current seismic codes allow the design of regular bridges by means of linear elastic analysis based on inelastic design spectra. In bridges with superstructure transverse motion restrained at the abutments, a dual load path behavior is observed. The sequential yielding of the piers can lead to a substantial change in the stiffness distribution. Thus, force distributions and displacement demand can significantly differ from linear elastic analysis predictions. The objectives of this study are assessing the influence of piers-deck stiffness ratio and of soil-structure interaction effects on the seismic behavior of continuous SCC bridges with dual load path, and evaluating the suitability of linear elastic analysis in predicting the actual seismic behavior of these bridges. Parametric analysis results are presented and discussed for a common bridge typology. The response dependence on the parameters is studied by nonlinear multi-record incremental dynamic analysis (IDA). Comparisons are made with linear time history analysis results. The results presented suggest that simplified linear elastic analysis based on inelastic design spectra could produce very inaccurate estimates of the structural behavior of SCC bridges with dual load path.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.1
• /
• pp.49-55
• /
• 2009

This paper presents the optimal shape of microelectrode that generates dielectrophoretic(DEP) force to separate particles in homogeneous medium. The principle of the particles sorting is based on the use of the relative strengths of negative DEP (nDEP) and drag forces, as in a general DEP-activated cell sorter (DACS). To numerically calculate the DEP force and drag force, the simulation is implemented in MATLAB 7.0. The properties of particles, which are used in simulation, are similarly selected as those of cells to apply cell separation. The most optimized shape of electrode is selected by numerical simulation according to a variety of electrode shape such as rectangle, trapezoidal, and right-triangle. Through, in addition, parameter study, we found that applied frequency is more significant factor on the separation than various parameters, such as applied voltage and permittivity of medium, that decide on the strength of DEP force.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.11a
• /
• pp.67-71
• /
• 2008

Rocket nozzle components and thrusters for next-generation solid rocket with variable thrust, and small uncooled liquid rocket thrusters are required to withstand ultra-high temperature upto $2500^{\circ}C$. In this survey, the operationg environments are investigated with the suggeations of proper materials and their fabrication methods. Especially, It is suggested that Rhenium and other competative matrials are exploited to $2500^{\circ}C$ hot components, and thus needed to be developed.

• The Journal of the Korea Contents Association
• /
• v.7 no.1
• /
• pp.116-123
• /
• 2007

This paper proposed a new amplitude width modulation for OLED data driver IC. The data driver controls brightness of OLED by adjusting amplitude and width of the data drive current pulse. There were two conventional methods; pulse amplitude modulation(PAM) and pulse width modulation(PWM). The PWM method suffered from lower light emitting time efficiency at low luminance signal. The PAM method suffered from large chip area using DACs for each column. The proposed method was aiming at accurately controlling of the current level by MSB data and light emitting efficiency by LSB data to improve the inefficiencies of the PAM and a PWM. The proposed AWM driver circuit implemented using $0.35-{\mu}m$ 3-poly 4-metal CMOS high voltage process. The simulation result shows the improvement in the accuracy of the gray level control even though the driver circuit is smaller than the PAM.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.3
• /
• pp.187-194
• /
• 2020

In this study, computational analyses are carried out to investigate the interference flows and the aerodynamic characteristics of a hit-to-kill intercepter due to lateral jets at medium altitude. In addition, the analyses are performed for air and multi-species gas used in the side jet. The results indicate that the position of the barrel shock are shifted upstream and the structure of the shock wave are changed for the multi-species jet when compared to the air jet. As a result, the high pressure region with multi-species jet moves forward and the pitching moment is higher under the same flow condition. Moreover, the inclusion of high temperature effects makes drastic changes in pressure distribution. The jet width is much bigger, and the jet diffuses over wider range in medium altitude than in low altitude, because of the low density of the freestream.

• YAKHAK HOEJI
• /
• v.37 no.2
• /
• pp.136-142
• /
• 1993

To a suspension of 1-cyclopropyl-6,8-difluoro-1,4-dihydro-7-{3,7-diazabicyclo[3.3.0]oct-1(5)-en-3-yl}-4-oxo-3-quinoline carboxylic acid(C1) in sodium hydroxide solution and water is added dropwise with stirring carbon disulfide. [6R-[6$\alpha$, 7$\beta$(Z)]]-7-[[[2-Amino-4-thiazoly)methoxyimino]-acetyl]amino]-3-[[[[7-( 3-carboxy-1-cyclopropyl-6,8-difluoro-1,4-dihydro-4-oxo-7-guinolonyl)-3,7-diazabicyclo[3.3.0]oct-1(5)-en-3-yl]thioxomethyl]thio]methyl]-8-oxo-5-thia-1-azabicyclo[4.2.0]oct-2-en-2-carboxylic acid (DACD) was synthesized from 1-cyclopropyl-6,8-difluoro-1,4-dihydro-7-[7-(mercapto) thioxomethyl-[3,7-dia zabicyclo[3.3.0]oct-1(5)-en-3-yl}]-4-oxo-3-quinoline carboxylic acid disodium salt(C2) and cefotaxime. The invitro activity of novel dual-action cephalosporin, DACD, was compared with the in vitro activities of CENO(cefotaxime 3'-norfloxacin dithiocarbamate), cefotaxime, and norfloxacin against a variety of bacterial species. In vitro activity of DACD was superior to that of norfloxacin against Streptococcus pyogenes. Against Gram-positive and Gram-negative bacteria, its activity was almost equal to that of CENO.

• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.289-293
• /
• 2000

We propose two new algorithms for parallelism-independent scheduling. The machine code generated from the compiler using these algorithms in its scheduling phase is parallelism-independent code, executable in minimum time regardless of the number of the processors in the parallel computer. Our new algorithms have the following phases: finding the minimum number of processors on which the program can be executed in minimal time, scheduling by an heuristic algorithm for this predefined number of processors, and serialization of the parallel schedule according to the earliest start time of the tasks. At run time tasks are taken from the serialized schedule and assigned to the processor which allows the earliest start time of the task. The order of the tasks decided at compile time is not changed at run time regardless of the number of the available processors which means there is no out-of-order issue and execution. The scheduling is done predominantly at compile time and dynamic scheduling is minimized and diminished to allocation of the tasks to the processors. We evaluate the proposed algorithms by comparing them in terms of schedule length to the CP/MISF algorithm. For performance evaluation we use both randomly generated DAGs (directed acyclic graphs) and DACs representing real applications. From practical point of view, the algorithms we propose can be successfully used for scheduling programs for in-order superscalar processors and shared memory multiprocessor systems. Superscalar processors with any number of functional units can execute the parallelism-independent code in minimum time without necessity for dynamic scheduling and out-of-order issue hardware. This means that the use of our algorithms will lead to reducing the complexity of the hardware of the processors and the run-time overhead related to the dynamic scheduling.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.1005-1008
• /
• 2007

In this study, an architecture for 262K-color TFT-LCD source driver. In this paper proposed the chip consumes smaller area and static current which is suitable for QVGA resolutions. In the conventional structures, all of them need large number of OPAMP buffers to drive the pixels, Therefore, highly resistive R-DACs are needed to generate gamma voltages to reduce the static current. In this study, our design only used two OPAMPs and low resistance RDACs without increasing the quiescent current. Thus, it was experted that chip would be more in consuming lower static power for longer battery lifetime. The source driver were implemented by the 3.3 V $0.35\;{\mu}m$ CMOS technology provided by TSMC. The area of the core OPAMP circuit was about $110\;{\mu}m\;{\times}\;150\;{\mu}m$ and that of the source driver was $880\;{\mu}m\;{\times}\;430\;{\mu}m$. As compared to the conventional structure, approximately 64.48 % in area was achieved.