• Journal of Oral Medicine and Pain
• /
• v.20 no.2
• /
• pp.497-513
• /
• 1995

Human genomic Deoxyribonucleic acid(DNA) was extracted from teeth by boiling, salting-out, phenol, boiling-phenol methods. The author compared DNA concentration and its purity, the accuracy of sex determination and the results of the D1S80 locus detection among above 4 methods. The following results were obtained : 1. DNA concentration was the highest in pulp with salting-out method and DNA purity was higher in pulp with salting-out and phenol methods than other 2 methods. 2. Sex determination was possible using of the pulp and the dentin of the teeth with four methods but, it was impossible in the enamel and some pulp with boiling method. 3. Amplification of D1S80 locus occurred from pulp and dentin with salting-out, phenol, and boiling-phenol methods. 4. There are no differences among the amplification of X-Y homologus amelogenin gene by application of 4 methods and salting-out, phenol methods efficiently makes available to amplification of D1S80 locus. From the investigation DNA extraction, sex determination, amplification of D1S80 locus was successfully accomplished with salting-out, phenol, boiling-phenol methods Therefore above 3 methods are available and applicable as forensic odontology for individual identification.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.6
• /
• pp.35-42
• /
• 2010

This paper describes a 10 bit 80MHz CMOS D/A converter for wireless communication system. The proposed circuit in the paper is implemented with a $0.18{\mu}m$ CMOS n-well 1-poly 6-metal process. The architecture of the circuit consists of the 4bit LSB with binary decoder, and both the 3bit ULSB and the 3bit MSB with the thermometer decoder. The measurement results demonstrates SFDR of 60.42dBc at sampling frequency 80MHz, input frequency 1MHz and ENOB of 8.75bit. INL and DNL have been measured to be ${\pm}$0.38LSB and ${\pm}$0.32LSB and glitch energy is measured to be 4.6$pV{\cdot}s$. Total power dissipation is 48mW at 80MHz(maximum sampling frequency) with a single power supply of 1.8V.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.48 no.1
• /
• pp.76-81
• /
• 2015

The effects of temperature, photon irradiance, and photoperiod on the growth of Sargassum horneri embryos were examined for female plants collected at Chokpo in Tongyeoung, Gyeongnam Prefecture, Korea on 27 December 2011. Mature plant receptacles were detached, and fertilized eggs were cultured in the laboratory at temperatures of $5-25^{\circ}C$ with photon irradiances of $10-80{\mu}mol\;m^{-2}s^{-1}$ under 14L:10D and 10L:14D photoperiods. Germination and embryo growth were rapid at $20-25^{\circ}C$ and $40{\mu}mol\;m^{-2}s^{-1}$ under 14L:10D. The number of rhizoids in the germinated young thalli was high at high photon irradiances ($40-80{\mu}mol\;m^{-2}s^{-1}$) and $15-20^{\circ}C$. At $20^{\circ}C$ and 14L:10D, vigorous growth of main and lateral branches was observed; however, at $5^{\circ}C$ under both photoperiods, plant growth decreased markedly. In the present study, S. horneri grew well at high temperatures ($20-25^{\circ}C$) and high photon irradiances ($40-80{\mu}mol\;m^{-2}s^{-1}$) with a 14L:10D photoperiod.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.4
• /
• pp.13-20
• /
• 2008

This paper describes the design of low power 12bit Digital-to-Analog Converter(D/A Converter) using Pseudo-Segmentation method which shows the conversion rate of 80MHz and the power supply of 1.8V with 0.18um CMOS n-well 1-poly 6-metal process for advanced wireless communication system. Pseudo-segmentation method used in binary decoder consists of simple parallel buffer is employed for low power because of simpler configuration than that of thermometer decoder. Also, using deglitch circuit and swing reduced drivel reduces a switching noise. The measurement results of the proposed low power 12bit 80MHz CMOS D/A Converter shows SFDR is 66.01dBc at sampling frequency 80MHz, input frequency 1MHz and ENOB is 10.67bit. Integral nonlinearity(INL) / Differential nonlinearity(DNL) have been measured ${\pm}1.6LSB/{\pm}1.2LSB$. Glich energy is measured $49pV{\cdot}s$. Power dissipation is 46.8mW at 80MHz(Maximum sampling frequency) at a 1.8V power supply.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.4
• /
• pp.375-382
• /
• 2019

In this study, an experimental study on the buildability of the structure using the developed printing materials and equipment was performed. Experimental variables included the moving speed of nozzles(=80 and 100mm/s), the revolutions per minute (RPM) of screw in discharge buckets, and the aspect ratio(=1.67 and 5.00) reflecting wall length of the structures. Buildability of the 3D printed concrete structures was analyzed based on the maximum decomposition layer and collapse patterns of the structures according to the experimental variables. The nozzle movement speed of 80mm/s and the aspect ratio of 1.67 were favorable for 3D printing in this study. The collapse process of structure due to uneven layer decomposition was also analyzed through the relative displacement measurement of the lower part of the structure during printing.

• Korean Journal of Weed Science
• /
• v.16 no.1
• /
• pp.36-41
• /
• 1996

The experiments were conducted to identify the herbicidal effect of 2,4-D{ (2,4-dichlorophenoxy) acetic acid}, 2,4-D ethylester {ethyl 2,4- dichlorophenoxy acetate} and bentazon{3- isopropyl-1H-2,1,3- benzothiazin- 4-(3H)one 2,2-dioxide} on Sagittaria trifolia. Both 2,4-D and 2,4-D ethylester could completely control S. trifolia when applied before 80 days after transplanting of the tubers (DAT), but the weeding effect by bentazone decreased when applied after 60 DAT. 2,4-D and 2,4-D ethylester were effectively translocated from the treated parts to growing point. They killed S. trifolia completely when applied at 80 DAT under 3cm standing water depths, but the controlling effect by bentazone decreased at deeper than 1cm standing water depth. Formation of S. trifolia tuber was effectively suppressed with 2,4-D at 7g ai/10a and 2,4-D ethylester at 6g ai/10a when applied 60 DAT.

• Journal of Oral Medicine and Pain
• /
• v.20 no.2
• /
• pp.515-528
• /
• 1995

The human genomic deoxyribonucleic acid(DNA) was extracted from the pulp, dentin of 22 teeth by clelex, phenol methods. Samples of the tooth-derived DNA were amplified by polymerase chain reaction(PCR), electrophosed for sex determination by detection of X-Y homologus amelogenin gene and D1S80 locus detection The following results have been achieved. 1. Chelex and phenol method are effective to sex determination in the pulp and dentin 2. Chelex method is not suitable for detection of D1S80 locus. 3. Concentration and purity of DNA for teeth using chelex method is lower than using phenol method. From the above investigation, chelex method is simple, rapid for sex determination, but it is not suitable for detection of VNTRs.

• BMB Reports
• /
• v.28 no.4
• /
• pp.359-362
• /
• 1995

The highly polymorphic variable number of tandem repeat (VNTR) loci in the human genome are informative markers for the genetic characterization of individuals in the paternity test and forensic science as well as for the study of human disease. In this study, VNTR loci D1S80 and D2S123 have been amplified by PCR and the amplified length polymorphic alleles were detected with a discontinuous vertical PAGE system and silver staining. For explicit DNA typing, PCR optimization, in which amplification efficiencies are similar over a wide range of allele sizes, non-specific amplifications are minimal, and new longer alleles have high amplification efficiency, has been performed by changing the PCR reaction buffer composition and thermal cycling conditions. It turned out that adding an appropriate amount of Tween 20 and NP40 to the PCR reaction buffer and raising the annealing temperature to $68^{\circ}C$ in thermal cycling made it possible for optimal VNTR loci amplification. A modified PAGE system for VNTR separation was established. Under these conditions, new longer alleles in the 01580 locus were discovered and 025123 pattern changes in colorectal tumors were observed. These technical tips are valuable for detecting various amplified fragment length polymorphisms.

• KSBB Journal
• /
• v.22 no.1
• /
• pp.58-61
• /
• 2007

A Insecticidal effect of Ginkgo biloba leaves extract was conducted for Dermatophagoides pteronyssinus as a predominant species in korea. D. pteronyssinus has been cultured in constant temperature and humidity chamber at the 25$^{\circ}C$ and 75% of relative humidity. The mortality of mites was determined by counting the dead bodies for every hour within 48 hours with pin hall microscope after treated by Ginkgo biloba leaves extract spreaded on 0.1 g of mass cultured media. The sequence of mortality for D. pteronyssinus are as follows, bilobalide was 91.6%, 80$^{\circ}C$ water extract was 82.8%, second water fraction was 75%, ethyl acetate fraction from 80$^{\circ}C$ water fraction was 73%, first ethyl acetate fraction from 80$^{\circ}C$ water extract was 69.4%, putaltrin was 65%, distilled water was 58%, methanol extract was 57.8%, Ginkgolide-A was 57.1 %, ethyl acetate fraction of 80$^{\circ}C$ water extract was 55%, respectively. From the these results we conclude that the bilobalide is the most effective component in the Ginkgo biloba leaves extract having insecticidal effect on house dust mite.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.22 no.1
• /
• pp.80-83
• /
• 2018

Purpose Assessment of Serum Thyroglobulin (sTg) value in total thyroidectomy patients having an ablation dose of radioactive iodine indicates remaining cancer or metastasis. Especially, sTg in patients on withdrawal thyroxine or thyrogen administration for radioiodine ablation is an important indicator to determine the direction of further treatment and prognosis. Current guidelines suggest measurement of sTg is performed at 72 hours after the last injection of thyrogen. and assumes that sTg reaches maximum serum levels at that time. The purpose of this study is to evaluate the variation of sTg measured after thyrogen administration. Materials and Methods We compared with sTg performed at 24hours(D0) and 72hours(D2) after the last injection of thyrogen. We reviewed D0 and D2 from 276 patients were divided them into three groups according to ablation dose of radioactive iodine, 5mCi(A group), 30~80mCi(B group) and 100~200mCi(C group). We used T-test for comparison between D0 and D2. sTg was measured in serum using immunoradiometric assay (Tg-plus RIA; BRAHMS, Berlin, Germany). Results There is no critical variation between D0 and D2 in A group(n=100)(P=0.32), The case of increase(D2>D0) is 45, no change(D2=D0) is 23, decrease(D2D0 is 91, D2=D0 is 28, D2D0 is 19, D2=D0 is 2. The biggest increase is 143.6 ng/mL from 98.4 to 242. Conclusion There was a significant difference in the group over 30mCi. and the case of D2>D0 is 45%, 58.7%, 90.5% for each group. therefore, D2 increased as the dose of radioactive iodine increased. Furthermore, the most sTg values of D0 and D2 are variation under 2.0 ng/mL, so reproducibility as well as sensitivity of sTg will be important at values below 2ng/mL.