• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.11
• /
• pp.2021-2026
• /
• 2007

In the parer, we design a non-coherent UWB system by adopting the architecture of a simplified asynchronous transmission and the edge-triggered pulse transmission, which makes e system performance independent of the share of the transmitted waveform, robust to multipath channels. The designed non-coherent UWB transceiver architecture has an advantage of the simple realization since any mixer, high-speed correlator, and high-sampling A/D converter are not necessary at the cost of performance degradation of about 3dB. Further, the designed non-coherent UWB transceiver is actually implemented with the wireless CANVAS prototype testbed in short range indoor application environments such as a lecture room. The implemented prototype testbed is proven to offer the data rate of 115kbps on the conditions of Peer-to-Peer(P-to-P) in the indoor channel within the range of about 10m.

• Nuclear Engineering and Technology
• /
• v.56 no.3
• /
• pp.1037-1051
• /
• 2024

This paper presents the construction results and design of the UNIST Reactor Innovation platform for small modular reactors as a versatile testbed for exploring innovative technologies. The platform uses simulant fluids to simulate the thermal-hydraulic behavior of a reference small modular reactor design, allowing for cost-effective design modifications. Scaling analysis results for single and two-phase natural circulation flows are outlined based on the three-level scaling methodology. The platform's capability to simulate natural circulation behavior was validated through performance calculations using the 1-D system thermal-hydraulic code-based calculation. The strategies for evaluating cutting-edge technologies, such as the integration of a solid oxide electrolysis cell for hydrogen production into a small modular reactor, are presented. To overcome experimental limitations, the hardware-in-the-loop technique is proposed as an alternative, enabling real-time simulation of physical phenomena that cannot be implemented within the experimental facility's hardware. Overall, the proposed versatile innovation platform is expected to provide valuable insights for advancing research in the field of small modular reactors and nuclear-based hydrogen production.

• Journal of Satellite, Information and Communications
• /
• v.7 no.1
• /
• pp.82-85
• /
• 2012

In this paper, we present the forward link ACM method to improve the link availability and system throughput. Also, we compare the prediction algorithm between slope based prediction and LMS algorithm. The simulation results show that the 99% of predicted values in LMS algorithm is within 3dB and that of predicted values in the slope based prediction method is within 4.5dB.

• ETRI Journal
• /
• v.10 no.1
• /
• pp.3-13
• /
• 1988

With the contunuing trends towards an information based society, telecommunications services are becoming an integral part of social activities. So, emphasis on ISDN is growing rapidly and placed on supporting integrated services delivery of different levels to the end user. The end user’s perception of an integraged services delivery(in particular, ISDN services) should reflect three interrelated capabilities, ISDN access capabilities and ISDN network capabilities. For turning the ISDN concept of above capabilities into reality, we have implemented the experimental system on user-network interfaces, which are three kinds of implementations in user access arrangements, namely basic access, intermediate rate multiplexed access and primary rate multiplexed access. Through these implementations, NTE(Network Terminating Equipment) is used for single basic access [2B+D], IMUX (Intermediate rate Multiplexer) for 4 basic accesses [4X(2B+D)] and PMUX(Primary rate Multiplexer) for [10/12 X (2B+D)]. This paper describes the outlines of system features on user access equipments, system architectures of testbed and experiment result of each access arrangements.

• Geosciences Journal
• /
• v.22 no.6
• /
• pp.891-902
• /
• 2018

Techniques for more reliable detection of 3D subsurface flow paths are highly important for most water-related geotechnical projects. In this case study, a magnetometric resistivity method with a new approach and state-of-the-art technology ("Willowstick survey") was applied to the testbed dam (YD dam) site, and its applicability was validated by geotechnical investigation techniques including borehole drilling and sampling, Lugeon test, flow direction and velocity test, and seismic tomography. In addition to the magnetometric survey, a 3D electrical resistivity survey was performed independently and the results were compared and discussed. The electrical resistivity survey was effective in detecting groundwater levels, but it was limited in mapping leakage paths. On the other hand, the Willowstick magnetometric survey effectively detected geologic weaknesses (e.g., fault fracture) and potential leakage paths of the dam site foundation rocks. The results of this research are expected to be effective for water infrastructures where leakage is an important issue.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.11a
• /
• pp.95-96
• /
• 2018

This paper deals with the development status of eLoran system which is the best backup position, navigation, and timing (P NT) system of Global Navigation Satellite System (GNSS) and its performance result. I t especially explains the status of eLoran testbed implementation for the eLoran test service, development of eLoran transmitting system, differential Loran (dLoran) system, integrated operation and control system (IOCS), and integrated eLoran/GNSS receiver. The paper discusses about the future plan for the build up test transmitting station and backup P NT service to succeed to the trial operation of eLoran testbed system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.3B
• /
• pp.159-164
• /
• 2008

For increasing productivity of domestic IT industry, government and local agencies have some plans to establish industrial clusters to provide local firms with testbed, R&D center, and cooperative research project. The most difficult problem in this process is to decide the location of them by resonable methodology. In this paper, the subject is to find what the factors to be considered in locating facilities and industrial clusters invested by government are and how to decide efficiently. First, we look over some cases of other countries, and then find assessment items for locating. Finally we analyze these items and assessment model by the analytic Hierachy Process(AHP) and make conclusion, As a conclusion, we find the result that there are some differences between the object of govenmental policy and needs of industry. 'The base infrastructure for telecommunications environment' is more important to be considered by the firms than 'The local benefit of the public'

• Journal of Korea Multimedia Society
• /
• v.25 no.2
• /
• pp.325-334
• /
• 2022

Digital twin has the advantages of quality improvement and cost reduction, so it is widely applied to various industries. In this paper, a method to implement the major technologies of digital twin easily and quickly is presented. These include data management and relay servers, real-time monitoring applications including remote control interfaces, and direct connection protocols for video streaming. In addition, an algorithm for controlling a two-wheeled vehicle with a 2D interface is also proposed. The implemented system performs near real-time synchronization between the real environment and the virtual space. The delay time that occurs in remote control of the vehicle in the real environment was compared with the results of applying the proposed delay time reduction method. In addition, in the case of 2D interface-based control, an algorithm that can guarantee the user experience was implemented and applied to the actual environment and verified through experiments.

• Korean Journal of Computational Design and Engineering
• /
• v.21 no.2
• /
• pp.159-169
• /
• 2016

In order to realize the virtual prototyping (VP) of digital products, it is important to provide the people involved in product development with the appropriate visualization and interaction of the products, and the vivid simulation of user interface (UI) behaviors in an interactive 3D virtual environment. In this paper, we propose an approach to web-based 3D virtual experience using Unity and Leap Motion. We adopt Unity as an implementation platform which easily and rapidly implements the visualization of the products and the design and simulation of their UI behaviors, and allows remote users to get an easy access to the virtual environment. Additionally, we combine Leap Motion with Unity to embody natural and immersive interaction using the user's hand gesture. Based on the proposed approach, we have developed a testbed system for web-based 3D virtual experience and applied it for the design evaluation of various digital products. Button selection test was done to investigate the quality of the interaction using Leap Motion, and a preliminary user study was also performed to show the usefulness of the proposed approach.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2017.11a
• /
• pp.199-200
• /
• 2017

In order to meet the international performance requirements for eLoran testbed operation, it is necessary to measure ASF (Additional Secondary Factor) of vessel's route as well as differential correction and the provision using differential Loran (dLoran) station operation. According to HEA (Harbor Entrance and Approach) performance of the IMO, the position accuracy should be within 10meters. Therefore this paper presents the possibility to meet the position accuracy of the IMO HEA through simulation results.