• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.1918-1924
• /
• 2000

Dynamic characteristics of a vertically coupled structure used for micro gyroscopes, is studied. The coupled motion between the reference and sensing vibrations causes the zero-point output which means non-zero sensing vibration without angular velocity. This structural coupling deteriorates sensing performance and dynamic stability. We theoretically analyze dynamic characteristics associated the coupling phenomenon. Effects of reference frequency and coupling factor on the rotational direction and amplitude of elliptic oscillation are studied. A method to predict the existence of curve veering or crossing in frequency trajectories is introduced for the application to the design of micro gyroscopes with a vertically decoupled structure.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.8
• /
• pp.1130-1132
• /
• 2004

Photodissociation dynamics of tert-butyl isocyanide at 193 nm has been investigated by measuring rotationally resolved laser induced fluorescence spectra of CN fragments that were exclusively produced in the ground electronic state. From the spectra, internal energies of CN and translational energy releases in the products were obtained. The dissociation takes place in the excited triplet states which are strongly repulsive along the dissociation coordinate via curve crossing from the initially prepared state.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.11
• /
• pp.1-10
• /
• 1993

A Study on New Digital In this paper, we propose a new Angular Form Carrier Recovery Loop(AFCR loop) for PSK modulation technique. AF CR loop includes detected angle symbol and Multi Level Hardlimiter. Using zero crossing DPLL, we model 1st 2nd AF CR loop, and also derive SCurve. In order to prove steady state operation of AF CR loop, we evaluate performance of this loop by Monte-Carlo and analytical simulation method. We also compare the performance of AF CR loop to that of other loop in terms of acquisition, S-Curve, and RMS jitter. From the comparison result, we verify that the performance of AF CR loop operates well in steady state.

• Proceedings of the KSR Conference
• /
• 2000.05a
• /
• pp.415-422
• /
• 2000

The Seoul Subway Line 4 crossing downtown diagonally constructed in February 1980 and opened on October 11, 1983. The line 4 is thus able to link southern and northern parts of Seoul with the downtown as well as with the Seoul outskirts. More than 810,000 people use it everyday. Line 4 was constructed like Line 1,2,3 with ballast track system causing much maintenance cost gradually and espicially much public discontent due to wheel and rail contact noise by railway viaduct with sharp curves. CWR on railway viaduct with sharp curves, 180m$\leq$R$\leq$300m, hasn't been designed and constructed ever in domestic. Therefore in order to reduce noise and vibration caused by interaction between wheel and rail the possibility and the methods of CWR(Continuous Welded Rail) on railway viaduct with sharp curve less than R300 will lead it to the maintenance free system.

• Journal of Animal Science and Technology
• /
• v.45 no.6
• /
• pp.885-890
• /
• 2003

This study was conducted to estimate the growth curve parameters of 253 heads of F2 population produced by inter-crossing F1 from Korean Native boars and Landrace sows, and to estimate the effects of Leptin receptor gene(LEPR) on their growth characteristics. Growth curve parameters were estimated from nonlinear regression using Gompertz model individually. Average mature weight and average maturing rate estimated were 179.69${\pm}$4.40kg and 0.3103${\pm}$0.0043, respectively. The effect of sex was insignificant for all the parameters estimated from Gempertz model(p〉.05), and the effect of calving group was significant for mature weight and maximum growth rate at inflection point (p〈.05). The effect of LEPR genotype were significant for all the growth curve parameters(p〈.05). According from the results of the least squares means of growth curve parameters by LEPR genotypes, mature weight and point of inflection were highest in genotype AA in which the maturing rate was the lowest, and were lowest in genotype DD in which maturing rate was the highest, reversely.

• Journal of the Korea Concrete Institute
• /
• v.14 no.6
• /
• pp.982-988
• /
• 2002

Current design equations for shear strength of reinforced concrete columns generally overestimate the shear strength contribution by the circular transverse reinforcement. This is due to the simplification of the discrete distribution of the reinforcement to the continuous one and the imprudent application of the classical truss model to the circular section, which is different in shear-resisting mechanism from the rectangular section. This study presents a rational model for the prediction of shear strength contribution by the circular transverse reinforcement considering the starting location of a diagonal crack, the number of transverse reinforcing bars crossing the main crack and the geometrical strength component of the transverse resistance. It was found that, for lower amount transverse reinforcement, the crack starting point and the number of crack crossing bars greatly influence the shear-resisting capacity. Proposed model leads to a reliable design equation which is derived using a linear regression method and is in good agreement with the lower bound of exact strength curve.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.16 no.4
• /
• pp.373-386
• /
• 2014

This paper concerns the deformation behavior of tunnels crossing weak zone during excavation. A three dimensional finite element model was adopted in order to conduct a parametric study on the orientation of weaj zone in terms of strike and dip angle relative to the tunnel longitudinal axis. The results of the analyses were then analyzed so that the tunnel displacements in terms of the ratios between the crown settlement and springline displacement can be related to the orientation of the weak zone. The results indicate that the displacement ratios between the tunnel crown and springline tend to quantitatively change when a weak zone exists near or ahead of the tunnel suggesting that the displacement ratios can be effectively used to predict the weak zone during tunnelling. Practical implications of the findings are discussed.

• The korean journal of orthodontics
• /
• v.4 no.1
• /
• pp.31-40
• /
• 1974

The age of maximum growth increments-the adolescent spurt-is not only of developmental interest but is used as a marker for timing other growth events. And the mandibular growth rate follows the general growth curve, it is essential for an orthodontist to take the current and exact information about physical growth of patients. The author measured and studied the body height and weight of 11,694 children living in Seoul, and calculated out the mean, standard deviation, coefficient value, annual increments, percentage increments of each value, and made diagram to compare it with others. 1. The growth curve shows linear increment tendency until 17 years of age in male, 15 years in female. 2. The annual increment curves of body height and weight reveals the most peak value in 14-16 years in male and 11-14 years in female. 3. During 11-14 years of age, female growth exceed the male growth in the body height growth. And in weight growth, female growth exceed the male growth during 6-7 years and 11-12 years to show twice crossing. 4. It seemed that until 11-12 years in male and until 9-10 years in female the height growth show the priority to weight growth. And from 17 years in male and 15 years in female the body growth reveals the balanced growth pattern. 5. The time of changes of standard deviation curves of body height and weight coincided with that of annual increments. 6. The prominent high value of body height and weight in the comparison with other data may be due to the secioeconomical and nutritional, environmental influence. 7. The growth accerlation phenomena was detectable.

• Journal of the Institute of Convergence Signal Processing
• /
• v.8 no.4
• /
• pp.249-254
• /
• 2007

This paper describes a technique for detecting the boundary of the optic disk in digital image of the retina using inward and outward curve evolution. Optic disk boundary offers medical information about glaucoma progresses. For accurate boundary detection, image inpainting based on PDE removes blood vessels crossing the optic disk. For removing noises and preserving boundary of optic disk in image inpainting process, the anisotropic diffusion filtering is developed. After pre-processing, the optic disk boundary is determined using inward and outward curve evolution. Experimental results show that blurring effect of original region and optic disk boundary is reduced considerably. By the proposed method, we can detect correct disk boundary compare to conventional method.

• Advanced Composite Materials
• /
• v.17 no.1
• /
• pp.1-23
• /
• 2008

Robotized filament winding technology involves a robot that winds a roving impregnated by resin on a die along the directions of stresses to which the work-piece is submitted in applications. The robot moves a deposition head along a winding trajectory in order to deposit roving. The trajectory planning is a very critical aspect of robotized filament winding technology, since it is responsible for both the tension constancy and the winding time. The present work shows two original rules to plan the winding trajectory of structural parts, whose shape is obtained by sweeping a full section around a 3D curve that must be closed and not crossing in order to assure a continuous winding. The first rule plans the winding trajectory by approximating the part 3D shape with straight lines; it is called the discretized rule. The second rule defines the winding trajectory simply by offsetting a 3D curve that reproduces the part 3D shape, of a defined distance; it is called the offset rule. The two rules have been compared in terms of roving tension and winding time. The present work shows how the offset rule enables achievement of both the required aims: to manufacture parts of high structural performances by keeping the tension on the roving near to the nominal value and to markedly decrease the winding time. This is the first step towards the optimization of the robotized filament winding technology.