• 한국식품영양과학회지
• /
• 제37권11호
• /
• pp.1422-1426
• /
• 2008

본 연구에서는 일반아동과 자폐아동 모발의 무기질, 유해 중금속 함량, 혈액의 자유라디칼 및 세로토닌 함량을 측정함으로써 일반아동에 대한 자폐아동의 특성을 연구하고자 하였다. 실험그룹은 $3{\sim}9$세 사이의 50명의 아동을 일반아동(22명) 및 어린이 정신과 의사에 의해 판정된 자폐아동(28명)의 두 그룹으로 나누었다. 일반아동과 자폐아동 간의 나이, 신장, 체중 및 식이섭취량은 두 군간 유의적인 차이가 없었으나, 모발 중 다량미네랄 함량을 측정한 결과 Ca, Mg, P 및 S는 일반아동이 자폐아동보다 다소 높게 나타났으며, Na 및 K는 자폐아동에서 일반아동에 비해 유의적으로 높았다. 또한, 모발 중 미량미네랄 함량을 측정한 결과에서는 Cu, Zn, Fe, Cr 및 Se는 일반아동이 자폐아동보다 높게 나타났으며, 특히, Cu, Zn, Fe의 경우 두 그룹 간에 유의적인 차이를 나타내었다. Mn, B, Co 및 Mo는 두 그룹 간에 차이가 없었다. Al의 경우에는 자폐아동에서 더 높은 것을 관찰할 수 있었으나 유의적인 수준은 아니었다. 일반아동 및 자폐아동의 모발 중 유해중금속 함량을 측정한 결과 As, Hg 및 Be의 경우에는 두 그룹 간에 유의적인 차이를 나타내지 않았으나 Cd와 Pb는 일반아동에 비해 자폐아동에서 유의하게 높은 것을 관찰할 수 있었다. 혈액 내 자유라디칼 함량은 자폐아동이 일반아동에 비해 유의적으로 높게 나타났으며, 세로토닌 함량은 일반아동과 자폐아동 간의 유의적인 차이가 없었다. 이상의 결과 본 연구에서는 식이섭취량을 단 하루만을 조사하였으나 향후에는 조사기간을 더 늘리고 식품섭취유형과 패턴 및 식행동 장애 분석 등 좀 더 다양하고 깊이 있는 연구가 진행되어야 할 것이다. 또한 자폐아동은 일반아동에 비해 모발의 일부 미네랄 함량은 감소, 중금속 함량의 증가 및 자유라디칼 생성이 증가함으로써 자폐아동의 행동 및 발달장애에 영향을 미치는 것으로 사료된다. 향후 연구에서는 자폐아동에게 부족한 영양소의 보충 및 중금속 해독 영양소를 섭취함으로써 자폐아동의 행동 및 발달장애의 개선 기능에 대한 연구가 시행되어야 할 것이다.

• Journal of Korean Biological Nursing Science
• /
• 제3권1호
• /
• pp.41-52
• /
• 2001

This study was undertaken to investigate the effects of n-6(corn oil) & n-3(fish oil) fatty acids on infarction size and the cerebral activities of antioxidant enzyme in rat focal brain ischemia model. Weaning Sprague-Dawley rats were fed with either corn oil supplemented diet(COD, 14% corn oil) or fish oil supplemented diet(FOD, 14% menhaden oil) for 6 weeks. The right middle cerebral artery was occluded for 2 hours with a silicon rubber coated nylon surgical thread. After 24 hours of recirculation, the rats were sacrificed and brain sections were photographed using CCD camera after staining with 2, 3, 5-triphenyltetrazolium chloride for 60 minutes in room temperature. The infarcted area was measured and the volume of infarction was calculated. Catalase(CAT), superoxide dismutase(SOD) activities, and fatty acid composition in the brain were also measured. The total and corrected infarction volumes were not significantly different between FOD and COD group. The docosagexaenoic acid(DHA) and DHA content/arachidonic acid(AA) ratio of the cerebral cortex, an index of defense against lipid oxidation, were significantly increased in FOD group compared to those of COD group(p<0.05). In the left cortex(non-infarction side) as well as the right cortex(infarction side) of FOD group, CAT and Cu/Zn SOD activities were higher than those of the COD group(p<0.05). However, CAT and Cu/Zn SOD activities were not significantly different between the left cortex(non-infarction side) and the right cortex(infarction side) of both FOD and COD group. GPx activities were also not significantly different between two groups. Our results demonstrate that the brain infarction size in FOD and COD were not significantly different. However, cerebral lipid composition and antioxidant enzyme activities in FOD and COD group were different. Fish oil, a source of n-3 polyunsaturated fatty acid(PUFA) and corn oil, that of n-6(PUFA) may have a protective effect against oxidative stress induced via different mechanisms.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.93-96
• /
• 2003

Recently, various bulk metallic glasses (BMG's) haying good mechanical and chemical properties were developed. BMG's can easily be deformed in the supercooled liquid region, via viscous flow mechanism. In our previous work, we evaluated the deformation behavior and some other basic properties of Z $r_{41.2}$ $Ti_{13.8}$C $u_{12.5}$N $i_{10}$B $e_{22.5}$ alloy. In this study, we investigated the micro forming of Z $r_{41.2}$ $Ti_{13.8}$C $u_{12.5}$N $i_{10}$B $e_{22.5}$ alloy. The process condition was chosen based on the viscosity data from TMA, and superalloy and Si wafer with micro patterns on the surface were used as forming die. The alloy showed good replication of the patterns. However, some stripe patterns, resembling scratches, appeared on the deformed alloy surface. These scratches can be reduced or eliminated by polishing before forming.ing.ore forming.ing.

• 한국입자에어로졸학회지
• /
• 제9권4호
• /
• pp.201-208
• /
• 2013

Copper (II) and Nickel (II) mimic complexes of enzyme carbonic anhydrase were evaluated under ambient condition for carbon dioxide capture and conversion process. The synthesized complexes were characterized by ATR-FTIR and UV-DR spectroscopy. It was found that all the complexes have biomimetic activity towards $CO_2$ using para-nitrophenyl acetate (p-NPA) hydrolysis as the model reaction. Interestingly, the proper geometry obtained by the restricted orientation of tripodal N atoms in Cu (II) complex of 2,6-bis(2-benzimidazolyl) pyridine showed the highest activity (1.14 au) compared to others. The $CO_2$ bio-mineralization to $CaCO_3$ was carried out via in-vitro crystallization approach. Results indicate that the biomimetic complexes have a role in determining $CaCO_3$ morphology. The present observations establish a qualitative insight for the design of improved small-molecule catalysts for carbon capture.

• 한국대기환경학회지
• /
• 제13권1호
• /
• pp.51-63
• /
• 1997

Total suspended particulate matters in the ambient air were analyzed for eight chemical elements (Ca, Co, Cu, Fe, Mn, Pb, Si, and Zn) using an x-ray fluorescence spectrometry (XRF) at the Kyung Hee University - Suwon Campus during 1989 to 1994. To use these data as basis for source identification study, membership of each sample was selected to represent one of the well defined sample groups. The data sets consisting of 83 objects and 8 variables were initially separated into two groups, fine (d$_{p}$<3.3 ${\mu}{\textrm}{m}$) and coarse particle groups (d$_{p}$>3.3 ${\mu}{\textrm}{m}$). A hierarchical clustering method was examined to obtain possible member of homogeneous sample classes for each of the two groups by transforming raw data and by applying various distances. A disjoint principal component analysis was then used to define homogeneous sample classes after deleting outliers. Each of five homogeneous sample classes was determined for the fine and the coarse particle group, respectively. The data were properly classified via an application of logarithmic transformation and Euclidean distance concept. After determining homogeneous classes, correlation coefficients among eight chemical variables within all the homogeneous classes for calculated and meteorological variables (temperature. relative humidity, wind speed, wind direction, and precipitation) were examined as well to intensively interpret environmental factors influencing the characteristics of each class for each group. According to our analysis, we found that each class had its own distinct seasonal pattern that was affected most sensitively by wind direction.ion.

• Macromolecular Research
• /
• 제17권4호
• /
• pp.240-244
• /
• 2009

High molecular weight(MW), 3-arm star poly(methyl methacrylate)(PMMA) with a narrow MW distribution($M_n$=570,000 g/mol, PDI=1.36) was successfully synthesized by activators regenerated by electron transfer(ARGET) atom transfer radical polymerization(ATRP). The polymerization was carried out with a trifunctional initiator/$CuBr_2$/N,N,N',N",N"-pentamethyldiethy lenetriamine(PMDETA) initiator/catalyst system in the presence of a tin(II) 2-ethylhexanoate [$Sn(EH)_2$] reducing agent at $90^{\circ}C$. The concentration of the copper catalyst was as low as 30 ppm, and a high initiation efficiency of the initiating sites was obtained. The chain-end functionality of the high MW, 3-arm star PMMA was confirmed by a chain extension experiment with styrene via ARGET ATRP, using the same catalyst system.

• 한국정밀공학회지
• /
• 제31권10호
• /
• pp.865-871
• /
• 2014

Paradigm shift to 3-D chip stacking in electronic packaging has induced a lot of integration challenges due to the reduction in wafer thickness and pitch size. This study presents a hybrid bonding technology by self-alignment effect in order to improve the flip chip bonding accuracy with ultra-thin wafer. Optimization of Cu pillar bump formation and evaluation of various factors on self-alignment effect was performed. As a result, highly-improved bonding accuracy of thin wafer with a $50{\mu}m$ of thickness was achieved without solder bridging or bump misalignment by applying reflow process after thermo-compression bonding process. Reflow process caused the inherently-misaligned micro-bump to be aligned due to the interface tension between Si die and solder bump. Control of solder bump volume with respect to the chip dimension was the critical factor for self-alignment effect. This study indicated that bump design for 3D packaging could be tuned for the improvement of micro-bonding quality.

• 한국정밀공학회지
• /
• 제31권10호
• /
• pp.857-863
• /
• 2014

In this work, we introduce various bonding technologies for 3D package and suggest Insert-Bump bonding (ISB) process newly to stack multi-layer chips successively. Microstructure of Insert-Bump bonding (ISB) specimens is investigated with respect to bonding parameters. Through experiments, we study on find optimal bonding conditions such as bonding temperature and bonding pressure and also evaluate in the case of fluxing and no-fluxing condition. Although no-fluxing bonding process is applied to ISB bonding process, good bonding interface at $270^{\circ}C$ is formed due to the effect of oxide layer breakage.

• 열처리공학회지
• /
• 제30권2호
• /
• pp.61-66
• /
• 2017

$SnO_2$ was electrodeposited on nodule-type Cu foil at varing current density and electrodeposition time. Unlike the previous research results, when the anodic current is applied, the $SnO_2$ layer was not electrodeposited and the substrate is corroded. When the cathodic current was applied, the $SnO_2$ layer could be successfully deposited. At this time, the surface microstructure of the powdery type was observed, which showed similar crystallinity to amorphous and had a very large surface area. Crystallinity increased after low-temperature heat treatment at $250^{\circ}C$ or lower. As a result of evaluating the charge/discharge performances as an anode material for lithium ion battery, it was confirmed that the capacity of the heat treated $SnO_2$ was increased more than 2 times, but it still showed a limit point showing initial low coulombic efficiency and low cyclability. However, it was confirmed that the battery performances may be enhanced through optimizing the electrodeposition process and introducing post heat treatment.

• 폴리머
• /
• 제36권3호
• /
• pp.295-301
• /
• 2012

선형 PEG단위를 덴드리머의 중심에 갖는 덴드리머의 합성을 위한 효율적인 연결 방법이 개발되었다. 합성전략은 알카인과 아자이드기 사이의 반응을 구리(1)촉매의 존재하에서 진행하는 클릭화학을 이용하였다. 덴드리머의 핵으로 작용할 수 있는 단위체인 옥타(에틸렌글리콜)디아자이드와 도데카(에틸렌글리콜)디아자이드를 합성하였고, 이 두 화합물의 아자이드기는 덴드리머의 형성에 이용되었다. 두 디아자이드화합물을 알카인 덴드론과 클릭 반응을 통해서 덴드리머의 핵의 선형 길이가 다른 두 종류의 덴드리머 제조에 대한 수렴형 합성법을 완성하였다.