• 한국재료학회지
• /
• 제22권7호
• /
• pp.374-378
• /
• 2012

In an effort to overcome the problems which arise when fabricating high-aspect-ratio TSV(through silicon via), we performed experiments involving the void-free Cu filling of a TSV(10~20 ${\mu}m$ in diameter with an aspect ratio of 5~7) by controlling the plating DC current density and the additive SPS concentration. Initially, the copper deposit growth mode in and around the trench and the TSV was estimated by the change in the plating DC current density. According to the variation of the plating current density, the deposition rate during Cu electroplating differed at the top and the bottom of the trench. Specifically, at a current density 2.5 mA/$cm^2$, the deposition rate in the corner of the trench was lower than that at the top and on the bottom sides. From this result, we confirmed that a plating current density 2.5 mA/$cm^2$ is very useful for void-free Cu filling of a TSV. In order to reduce the plating time, we attempted TSV Cu filling by controlling the accelerator SPS concentration at a plating current density of 2.5 mA/$cm^2$. A TSV with a diameter 10 ${\mu}m$ and an aspect ratio of 7 was filled completely with Cu plating material in 90 min at a current density 2.5 mA/$cm^2$ with an addition of SPS at 50 mg/L. Finally, we found that TSV can be filled rapidly with plated Cu without voids by controlling the SPS concentration at the optimized plating current density.

• 한국표면공학회지
• /
• 제40권1호
• /
• pp.16-22
• /
• 2007

Recently, mesoporous metallic materials are becoming more and more important in various applications like catalysts, electrochemical detectors, batteries, and fuel cells because of their high surface area. Among the various methods for manufacturing mesoporous structure, surfactant templating method followed by electroplating has been tried in this study. A mesoporous metallic film was prepared by electrodeposition from electroplating solution mixed with surfactant template. Nonionic type lyotropic liquid crystalline surfactant, Brij56, and nickel acetate based solution were selected as a template material and electroplating solution, respectively. To determine the content of surfactant forming a hexagonal column structure, the phase diagram of electroplating solution and surfactant mixture has been exploited by polarized optical microscopy equipped with heating and cooling stage. Nickel films were electroplated on Cu foil by stepwise potential input method to alleviate the concentration polarization occurred during the electroplating process. TEM and XRD analyses were performed to characterize the size and shape of mesostructures in manufactured nickel films, and electrochemical characterization was also carried out using cyclic voltammetry.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.62-64
• /
• 2001

In this paper, we present the fabrication and performance of tunable capacitors with various structural geometry of plates. Experimental devices have been fabricated using Cu-electroplating techniques and standard MEMS techniques. In particular, the thickness of electroplated Cu is designed below $0.5{\mu}m$ for lower actuation voltage. The fabricated tunable capacitors has been tested from $OV{\sim}42V$ and achieves a tuning ratio of $46%{\sim}64.2%$.

• Progress in Superconductivity
• /
• 제7권2호
• /
• pp.145-151
• /
• 2006

Nickel and nickel-tungsten alloy were electroplated on a cold rolled and heat treated copper(Cu) substrate. 4 mm-thick high purity commercial grade Cu was rolled to various thicknesses of 50, 70, 100 and 150 micron. High reduction ratio of 30% was applied down to 150 micron. Rolled texture was converted into cube texture via high temperature heat treatment at $400-800^{\circ}C$. Grain size of Cu was about 50 micron which is much smaller compared to >300 micron for the Cu prepared using smaller reduction pass of 5%. 1.5 km-long 150 micron Cu was fabricated with a rolling speed of 33 m/min and texture of Cu was uniform along length. Abnormal grain growth and non-cube texture appeared for the specimen anneal above $900^{\circ}C$. 1-10 micron thick Ni and Ni-W film was electroplated onto an annealed cube-textured Cu or directly on a cold rolled Cu. Both specimens were annealed and the degree of texture was measured. For electroplating of Ni on annealed Cu, Ni layer duplicated the cube-texture of Cu substrate and the FWHM of in plane XRD measurement for annealed Cu layer and electroplated layer was $9.9^{\circ}\;and\;13.4^{\irc}$, respectively. But the FWHM of in plane XRD measurement of the specimen which electroplated Ni directly on cold rolled Cu was $8.6^{\circ}$, which is better texture than that of nickel electroplated on annealed Cu and it might be caused by the suppression of secondary recrystallization and abnormal grain growth of Cu at high temperature above $900^{\circ}C$ by electroplated nickel.

• 마이크로전자및패키징학회지
• /
• 제10권4호
• /
• pp.39-46
• /
• 2003

플립칩용으로 Sn-Cu 공정 솔더 범프를 전해도금을 이용하여 제조하고 특성을 연구하였다. Si 웨이퍼 위에 UBM(Under Bump Metallization)으로 Al(400 nm)/Cu(300 nm)/Ni(400 nm)/Au(20 nm)를 전자빔 증착기로 증착하였다. 전류밀도가 1 A/d$\m^2$에서 8 A/d$\m^2$으로 증가함에 따라 Sn-Cu 솔더의 도금속도는 0.25 $\mu\textrm{m}$/min에서 2.7 $\mu\textrm{m}$/min으로 증가하였다. 이 전류밀도의 범위에서 전해도금된 Sn-Cu 도금 합금의 조성은 Sn-0.9∼1.4 wt%Cu의 거의 일정한 상태를 유지하였다. 도금 전류밀도 5 A/d$\m^2$, 도금시간 2hrs, 온도 $20^{\circ}C$의 조건에서 도금하였을 때, 기둥 직경 약 120 $\mu\textrm{m}$인 양호한 버섯 형태의 Sn-Cu 범프를 형성할 수 있었다. 버섯형 도금 범프를 $260^{\circ}C$에서 리플로우 했을 때 직경 약 140 $\mu\textrm{m}$의 구형 범프가 형성되었다. 화학성분의 균일성을 분석한 결과 버섯형 범프에서 존재하던 범프내 Sn 등 성분 원소의 불균일성은 구형 범프에서는 상당 부분 해소 되었다.

• 한국표면공학회지
• /
• 제43권2호
• /
• pp.64-72
• /
• 2010

CuSnZn electroplating was investigated as alternative to Ni plating. Evaluation of electrolyte and plating process was performed to control physical characteristics of the film, and to collect practical data for application. Hull-cell test was conducted for basic comparison of two commercialized products and developed product. Based on hull-cell test results, long term test of three electrolytes was performed. Various analysis on long term tested electrolyte and samples have been done. Reliable and practical data was collected using FE-SEM (FEI, Sirion), EDX (ThermoNoran SIX-200E), ICP Spectrometer (GBC Scientifi c, Integra XL), FIB (FEI, Nova600) for anlysis. Physical analysis and reliability test of the long term tested film were also carried out. Through this investigation plating time, plating speed, electrolyte composition, electrolyte metal consumption, hardness and corrosion resistance has been compared. This set of data is used to predict and control the chemical composition of the film and modify the physical characteristics of the CuSnZn alloy.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2007년 추계학술발표대회 개요집
• /
• pp.245-247
• /
• 2007

Sn-base solder bump is mainly used in micro-joining for flip chip package. The quantity of intermetallic compounds that was formed between Cu pad and solder interface importantly affects reliability. In this research, micro-bump was fabricated by two binary electroplating and the intermetallic compounds(IMCs) was estimated quantitatively. When the micro Sn-Ag solder bump was made by electroplating, SiC powder was added in the plating solution for protecting of intermetallic growth. Then, the intermetallic compounds growth was decrease with increase of amount of SiC power. However, if the mount of SiC particle exceeds 4 g/L, the effect of the growth restraint decrease rapidly.

• 마이크로전자및패키징학회지
• /
• 제12권2호
• /
• pp.129-134
• /
• 2005

SiP의 3D패키지에 있어서 구리도금은 매우 중요한 역할을 한다 이러한 구리 도금의 조건을 알아보기 위하여 조건이 다른 전해질에서 전기화학적 I-V특성을 분석하였다. 첨가제로 억제제와 촉진제의 특성을 분석하였다. 3D 패키지에 있어서 직경 50, 75, $100{\mu}m$의 via를 사용하였다. Via의 높이는 $100{\mu}m$로 동일하였다. Via의 내부는 확산방지층으로 Ta을 전도성 씨앗층으로 Cu를 magnetron 스퍼터링 방법으로 도포하였다. 직류, 펄스, 펄스-역펄스 등 전류의 파형을 변화시키면서 구리 도금을 하였다. 직류만 사용하였을 경우에는 결함 없이 via가 채워지지 않았으며 펄스도금을 한 경우 구리 충진이 개선을 되었으나 결함이 발생하였다. 펄스-역펄스를 사용한 경우 결함 없는 구리 충진층을 얻을 수 있었다.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2006년도 High Temperature Superconductivity Vol.XVI
• /
• pp.62-62
• /
• 2006

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2008년도 제35회 하계학술대회 초록집
• /
• pp.138-138
• /
• 2008