• 마이크로전자및패키징학회지
• /
• 제10권3호
• /
• pp.19-27
• /
• 2003

플립칩 전자패키지에서 칩과 기판(PCB)를 연결할 때, 통상적으로 칩쪽은 금속패드/UBM 처리를 기판 쪽은 표면처리를 한 후 솔더로 연결하는데, 이 때 사용되는 UBM이나 표면처리에 따라, 칩/솔더, PCB/솔더에 생성되는 금속간 화합물의 종류와 두께 및 솔더의 조성이 변하게 되어 궁극적으로 솔더 접합부의 기계적 신뢰성에 영향을 주게 된다. 본 연구에서는 Cu와 Au/Ni의 두가지 금속 패드가 무연솔더의 저주기 피로특성에 어떠한 영향을 미치는 지에 대해 고찰해 보았다. 저주기 피로 실험은 Cu나 Au/Ni이 표면처리 된 기판에 무연솔더 (Sn-3.5Ag, Sn-3.5Ag-1.5Cu, Sn-3.5Ag-XBi(X=2.5, 7.5), Sn-0.7Cu)를 리플로하여 총변위를 변화시키면서 상온에서 시행하였다. 기판의 표면처리에 관계없이 Sn-3.5Ag, Sn-3.5Ag-XCu(X-0.75, 1.5), Sn-0.7Cu 합금이 Sn-3.5Ag-7.5Bi 합금보다 피로저항성이 현격히 좋았으며, Au/Ni 표면처리한 솔더 접합부가 Cu 처리한 경우보다 피로저항성이 뛰어난 것으로 나타났다. 파괴 후 단면을 조사한 결과 계면에 형성된 금속간 화합물 내에 미세균열이 발견되었는데, Cu 표면처리를 사용한 경우 더 많은 미세균열이 생성된 것을 볼 수 있었다. Sn-3.5Ag, Sn-3.5Ag-Cu(X=0.75, 1.5), Sn-0.7Cu 합금의 경우 금속간 화합물 내에 생기는 미세 균열이 거시 균열로 성장하지 않고 파단은 항상 솔더 내부로 일어난 반면. Bi를 함유한 솔더의 경우, 기판의 표면처리에 상관없이 금속간 화합물/솔더 계면으로 균열이 생성 진전되어 다른 솔더합금에 비해 열악한 피로저항성을 나타내는 것으로 보인다. 이것은 Bi의 금속간화 합물/솔더 입계 편석이나 Bi 합금이 다른 합금에 비해 높은 경도값을 가지는 것에 인한 것으로 보여 진다.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2003년도 기술심포지움 논문집
• /
• pp.94-98
• /
• 2003

The microstructure of Sn1.8Bi0.8Cu0.6In alloys was evaluated at various aging time. The bumps of Sn1.8Bi0.8Cu0.6In alloys after reflowed at $250^{\circ}C$ were well-formed and had 260um height. The craters on the bumps, however, were observed. Intermetallic compounds formed on the interface between so]der and Cu/Ni UBM were consist of $(Cu,Ni)_6Sn_5$. As aging goes on up to 1000hours, the composition of Ni changed from $6.63\%$ at initial stage(as-reflowed) to $13.47\%$ at final stage(1000hours aging ). In addition, after 500hours aging, the floating of IMC to the solder was observed.

• 한국환경과학회지
• /
• 제14권7호
• /
• pp.669-674
• /
• 2005

Catalytic combustion of toluene was investigated on $CuOx/SnO_2-ZrO_2\;CuOx/SnO_2\;CuOx/ZrO_2$ catalysts prepared by impregnation. Characteristics of catalysts loaded on binary support and single support were observed by TPR, TPO, XRD, XPS techniques. The results on catalytic combustion showed that binary supports improve the activity of copper in the combustion of toluene. The reason for high catalytic activity on toluene combustion of $CuOx/SnO_2-ZrO_2$ catalyst was ascribed to oxidation$\cdot$reduction activity at low temperatures and stability of oxidation state after reduction.

• 한국주조공학회지
• /
• 제17권3호
• /
• pp.245-251
• /
• 1997

Solderability, interfacial reaction and mechanical properties of joint between Sn-Bi-Ag base solder and Cu-substrate were studied. Solders were subjected to aging treatments to see the change of mechanical properties for up to 30 days at $100^{\circ}C$, and then also examined the changes of microstructure and morphology of interfacial compound. Sn-Bi-Ag base solder showed about double tensile strength comparing to Pb-Sn eutectic solder. Addition of 0.7wt%Al in the Sn-Bi-Ag alloy increase spread area on Cu substrate under R-flux and helps to reduce the growth of intermetallic compound during heat-treatment. According to the aging experiments of Cu/solder joint, interfacial intermetallic compound layer was exhibited a parabolic growth to aging time. The result of EDS, it is supposed that the soldered interfacial zone was composed of $Cu_6Sn_5$.

• 마이크로전자및패키징학회지
• /
• 제15권2호
• /
• pp.17-21
• /
• 2008

Sn-Cu계 솔더 범프에서 무전해도금법을 이용한 범프 형성에 대한 연구를 하였다. $20{\mu}m$ via에 전기도금법으로 구리를 채운 웨이퍼 위에 ball형태의 범프를 형성하기 위하여 구리와 주석을 도금하여 약 $10{\mu}m$높이의 범프를 형성하였다. 구리 범프 형성 시 via위에 선택적으로 도금하기 위하여 활성화 처리 후 산세처리를 실시하고 무전해 도금액에 안정제를 첨가하였다. 무전해도금법을 이용하여 주석 범프 형성 시 도금층이 구리 범프에 비해 표면의 균일도가 벌어지는 것으로 관찰되었지만 reflow공정을 실시한 후 ball 형태의 균일한 Sn-Cu 범프를 형성하였다.

• 한국재료학회지
• /
• 제31권12호
• /
• pp.690-696
• /
• 2021

The purpose of this study is to develop a zirconium-based alloy with low modulus and magnetic susceptibility to prevent the stress-shielding effect and the generation of artifacts. Zr-7Cu-xSn (x = 1, 5, 10, 15 mass%) alloys are prepared by an arc melting process. Microstructure characterization is performed by microscopy and X-ray diffraction. Mechanical properties are evaluated using micro Vickers hardness and compression test. The magnetic susceptibility is evaluated using a SQUID-VSM. The average magnetic susceptibility value of the Zr-7Cu-xSn alloy is 1.176 × 10^-8 cm³g^-1. Corrosion tests of zirconium-based alloys are conducted through polarization test. The average Icorr value of the Zr-7Cu-xSn alloy is 0.1912 ㎂/cm². The elastic modulus value of 14 ~ 18 GPa of the zirconium-based alloy is very similar to the elastic modulus value of 15 ~ 30 GPa of the human bone. Consequently, the Sn added zirconium alloy, Zr-7Cu-xSn, is very interesting and attractive as a biomaterial that reduces the stress-shielding effect caused by differences of elastic modulus between human bone and metallic implants. In addition, this material has the potential to be used in metallic dental implants to effectively eliminate artifacts in MRI images due to low magnetic susceptibility.

• Journal of Welding and Joining
• /
• 제7권3호
• /
• pp.36-43
• /
• 1989

The furnace brazing in a Ar of copper to martensitic stainless steel(13.5Cr) using Cu-(5~8%)P-(0~8%)Sn powders was investigated. Shear strength, wettability, reacted layer, defect ratio at the stainless steel interface was evaluated. As Sn was added to the Cu-P powders, defect ratio and P content at the stainless steel interface decreased. And also as Sn was added, defect form at the stainless steel interface changed from the continuous layer to the discrete type, and shear strength of the brazed joint increased.

• 한국분말재료학회지
• /
• 제30권4호
• /
• pp.339-345
• /
• 2023

This study investigates the melting point and brazing properties of the aluminum (Al)-copper (Cu)-silicon (Si)-tin (Sn) alloy fabricated for low-temperature brazing based on the alloy design. Specifically, the Al-20Cu-10Si-Sn alloy is examined and confirmed to possess a melting point of approximately 520℃. Analysis of the melting point of the alloy based on composition reveals that the melting temperature tends to decrease with increasing Cu and Si content, along with a corresponding decrease as the Sn content rises. This study verifies that the Al-20Cu-10Si-5Sn alloy exhibits high liquidity and favorable mechanical properties for brazing through the joint gap filling test and Vickers hardness measurements. Additionally, a powder fabricated using the Al-20Cu-10Si-5Sn alloy demonstrates a melting point of around 515℃ following melting point analysis. Consequently, it is deemed highly suitable for use as a low-temperature Al brazing material.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.85.2-85.2
• /
• 2010

$Cu_2ZnSnSe_4$ (CZTSe) is one of candidate to alternate $Cu(In,Ga)Se_2$ as solar absorber material for solar cell. The expensive elements of In and Ga are replaced by Zn and Sn, respectively to lower the material cost. In this study we fabricated CZTSe thin film by selenization of single precursor layer consisted metallic constituent. Precursor compositions ratio were selected to have Cu-poor and Zn-rich content and prepared by RF magnetron sputtering. Thermal processing was applied to introduce selenium into as-deposited films at temperatures ranging from 350 to 500 for time up to 120 minutes. Single precursor films showed amorphous structure and consist of individual elements of Cu, Zn, and Sn. It was confirmed by XRD analysis that synthesis of CZTSe compound is occurred from lower temperature process, although concurrently additional phases such as binary cooper selenides are also existed. The quality of CZTSe crystal was improved as temperature increased. We also investigated the optical and electrical properties of as-selenized CZTSe as well.

• 한국재료학회지
• /
• 제18권1호
• /
• pp.45-50
• /
• 2008

Microstructural evolution and the intermetallic compound (IMC) growth kinetics in an Au stud bump were studied via isothermal aging at 120, 150, and $180^{\circ}C$ for 300hrs. The $AlAu_4$ phase was observed in an Al pad/Au stud interface, and its thickness was kept constant during the aging treatment. AuSn, $AuSn_2,\;and\;AuSn_4$ phases formed at interface between the Au stud and Sn. $AuSn_2,\;AuSn_2/AuSn_4$, and AuSn phases dominantly grew as the aging time increased at $120^{\circ}C,\;150^{\circ}C,\;and\;180^{\circ}C$, respectively, while $(Au,Cu)_6Sn_5/Cu_3Sn$ phases formed at Sn/Cu interface with a negligible growth rate. Kirkendall voids formed at $AlAu_4/Au$, Au/Au-Sn IMC, and $Cu_3Sn/Cu$ interfaces and propagated continuously as the time increased. The apparent activation energy for the overall growth of the Au-Sn IMC was estimated to be 1.04 eV.