• Proceedings of the IEEK Conference
• /
• 2000.06b
• /
• pp.169-172
• /
• 2000

This paper describes design of cryptographic processor which can execute SEED, DES, and triple DES encryption algorithm. To satisfy flexible architecture and area-efficient structure, the processor has I unrolled loop structure with hardware sharing and can support four standard mode, such as ECB, CBC, CFB, and OFB modes. To reduce overhead of key computation, the precomputation technique is used. Also to eliminate increase of processing time due to data input and output time, background I/O technique is used which data input and output operation execute in parallel with encryption operation of cryptographic processor. The cryptographic processor is designed using 2.5V 0.25 $\mu\textrm{m}$ CMOS technology and consists of about 34.8K gates. Its peak performances is about 250 Mbps under 100 Mhz ECB SEED mode and 125 Mbps under 100 Mhz triple DES mode.

• Convergence Security Journal
• /
• v.5 no.3
• /
• pp.87-92
• /
• 2005

The performance of a cryptographic module is the most important thing to achieve a high performance VPN system which realizes information security by encrypting and decrypting all the communicating data packets. However the cryptographic operations require much computation power and software cryptographic systems reveal bad performance. Thus, it is strongly recommended to develop a VPN system employing hardware component. This paper introduces a case study of developing a PCI add-on card which supports several block cipher algorithms such as DES, 3DES, AES, and SEED. The performance of them was measured by embedding the card in a commercial VPN system.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1551-1554
• /
• 2002

In this paper, the hardware implementation of the RSA public-key cryptographic algorithm is presented. The RSA cryptographic algorithm is depends on the computation of repeated modular exponentials. The Montgomery algorithm is used and modified to reduce hardware resources and to achieve reasonable operating speed for smart card. An efficient architecture for modular multiplications based on the array multiplier is proposed. We have implemented a 10240it RSA cryptographic processor based on proposed scheme in IESA system developed for smart card emulating system. As a result, it is shown that proposed architecture contributes to small area and reasonable speed for smart cards.

• International Journal of Computer Science & Network Security
• /
• v.21 no.8
• /
• pp.17-27
• /
• 2021

Non-abelian group based cryptosystems are a latest research inspiration, since they offer better security due to their non-abelian properties. In this paper, we propose a novel approach to non-abelian group based public-key cryptographic protocols using semidirect products of finite groups. An intractable problem of determining automorphisms and generating elements of a group is introduced as the underlying mathematical problem for the suggested protocols. Then, we show that the difficult problem of determining paths and cycles of Cayley graphs including Hamiltonian paths and cycles could be reduced to this intractable problem. The applicability of Hamiltonian paths, and in fact any random path in Cayley graphs in the above cryptographic schemes and an application of the same concept to two previous cryptographic protocols based on a Generalized Discrete Logarithm Problem is discussed. Moreover, an alternative method of improving the security is also presented.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.31 no.3
• /
• pp.309-322
• /
• 2021

In this study, an extension instruction set for high-speed operation of the ARIA block cipher algorithm on RISC-V processor is added to support high-speed cryptographic operation on low performance IoT devices. We propose the efficient ARIA cryptographic instruction set which runs on a conventional 32-bit processor. Compared to the existing software cryptographic operation, there is a significant performance improvement with proposed instruction set.

• Convergence Security Journal
• /
• v.14 no.4
• /
• pp.55-60
• /
• 2014

In this study, we propose a cryptographic module quality evaluation system referenced by ISO/IEC 9000 quality system with Quality, Quality Factor, Quality Subfactor, Metric. Practical application process encryption algorithm based on the encryption algorithm to encrypt the pros and cons valuation of diagnosis, point selection algorithm, analysis, and quality items(quality factor), eliciting constraints derived, such as the cryptographic module design quality evaluation system is set to step 5. The five steps are examples of field-based diagnostic tool for cryptographic operations, the most essential work to be done in order to derive one will work. 2-Factor encryption module for connection between indicator items(quality factor) to identify and ensure the quality of the item the constraints of the environment are two kinds of cryptographic operations. This study is an encryption module and a practical field application system, it presents the standardized model. We have to meet the rapid changes in information technology. The environment, development and the encryption algorithm applied to model a wide variety of on-site development encryption will be able to expect the efficiency.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.10
• /
• pp.1117-1125
• /
• 2007

In this paper, a study has been performed on the design of small loop probe and analysis of induced electromagnetic wave signal from a smartcard for contactless cryptographic analysis. Probes for cryptographic analysis are different from conventional EM probes, because the purpose of proposed probe is to obtain the information for secret key analysis of cryptographic system. The waveform of induced voltage on probe must be very close to radiated waveform from IC chip on smartcard because electromagnetic attack makes an attempt to analyze the radiated waveform from smartcard. In order to obtain secret key information, we need to study about cryptographic analysis using electromagnetic waves, an approximate model of source, characteristic of probe for cryptographic analysis, measurement of electromagnetic waves and calibration of probes. We measured power consumption signal on a smartcard chip and electromagnetic wave signal using proposed probe and compared with two signals of EMA point of view. We verified experimently the suitability of the proposed small loop probe for contactless cryptographic analysis by applying ARIA algorithm.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.44 no.6
• /
• pp.1-9
• /
• 2007

Recently, as a number of media are fused into a phone, the requirement of security of service provided on a mobile phone is increasing. For this, conventional cryptographic key based on password and security card is used in the mobile phone, but it has the characteristics which is easy to be vulnerable and to be illegally stolen. To overcome such a problem, the researches to generate key based on biometrics have been done. However, it has also the problem that biometric information is susceptible to the variation of environment, whereas conventional cryptographic system should generate invariant cryptographic key at any time. So, we propose new method of producing cryptographic key based on "Biometric matching-based key release" instead of "Biometric-based key generation" by using both face and iris information in order to overcome the unstability of uni-modal biometries. Also, by using mega-pixel camera embedded on mobile phone, we can provide users with convenience that both face and iris recognition is possible at the same time. Experimental results showed that we could obtain the EER(Equal Error Rate) performance of 0.5% when producing cryptographic key. And FAR was shown as about 0.002% in case of FRR of 25%. In addition, our system can provide the functionality of controlling FAR and FRR based on threshold.

• KIPS Transactions on Computer and Communication Systems
• /
• v.7 no.7
• /
• pp.183-194
• /
• 2018

With the rapid development of IoT(Internet of Things) technology, various convenient services such as smart home and smart city have been realized. However, IoT devices in unmanned environments are exposed to various security threats including eavesdropping and data forgery, information leakage due to unauthorized access. To build a secure IoT environment, it is necessary to use proper cryptographic technologies to IoT devices. But, it is impossible to apply the technologies applied in the existing IT environment, due to the limited resources of the IoT devices. In this paper, we survey the classification of IoT devices according to the performance and analyze the security requirements for IoT devices. Also we survey and analyze the use of cryptographic technologies in the current status of IoT open standard platform such as AllJoyn, oneM2M, IoTivity. Based on the research of cryptographic usage, we examine whether each platform satisfies security requirements. Each IoT open platform provides cryptographic technology for supporting security services such as confidentiality, integrity, authentication an authorization. However, resource constrained IoT devices such as blood pressure monitoring sensors are difficult to apply existing cryptographic techniques. Thus, it is necessary to study cryptographic technologies for power-limited and resource constrained IoT devices in unattended environments.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.4
• /
• pp.805-810
• /
• 2012

Recently, applications range of NFC is widening by popularization of smartphone. Expansion of NFC means generalization of electronic payments systems. So security of NFC is very important. AES-128 is safe cryptographic technique for NFC now in use. But, the more range of applications increases, the more safe cryptographic techniques are necessary. In this paper, we propose the safe method is unaffected by the development of NFC. Proposed A-NFC scheme, adding the authentication of asymmetric cryptographic, is easy to apply for NFC and NFC-USIM chipsets, and it can adapt to the general NFC environment.