• Interaction and multiscale mechanics
• /
• 제3권4호
• /
• pp.405-414
• /
• 2010

The performance of full-scale steel and composite bridge safety barriers under vehicle crash is evaluated by using the nonlinear explicit finite element code LS-DYNA. Two types of vehicles used in this study are passenger car and truck, and the performance criteria considered include structural strength and deformation, occupant protection, and post-crash vehicle behavior. It can be concluded that the composite safety barrier satisfies all performance criteria of vehicle crash. Although the steel safety barrier satisfies the performance criteria of occupant protection and post-crash vehicle behavior, it fails to satisfy the performance criterion of deformation. In all performance evaluations, the composite safety barrier exhibits a superior performance in comparing with the steel safety barrier.

• 한국안전학회지
• /
• 제33권5호
• /
• pp.120-126
• /
• 2018

The traffic accident types are largely classified into vehicle to vehicle accident, vehicle-to-person accident and single-vehicle. Especially, the single-vehicle accident types are severe when the vehicle crashed into road facilities such as bridge, piers, utility poles. The severity of single-vehicle accidents are ten times higher than that of all other accidents types. It is needed to consider to reduce accident severity. This study was conducted to develop crash worthy safety design facility to ensure the vehicle occupant safety. The simulation and the crash tests were conducted for assessment of the safety performance to check the criteria of CC2(Crash Cushion 2) level. THIV(Theoretical Head Impact Velocity) and PHD(Post-impact Head Deceleration) were used to assess occupant impact severity for crashes. The non-redirection collision test conditions for 900 kg and 1,300 kg-head on crash tests, 900 kg-1/4 offset crash tests, 1,300 kg-head on crash test with $15^{\circ}$angle were conducted. The simulation and experiment test result showed that THIV values were below 44 km/h criterion, PHD values were below the 20G. The development non-redirective crash cushion is expected to be used for the fixed object such as bridge piers for assuring occupant safety.

• Steel and Composite Structures
• /
• 제24권3호
• /
• pp.351-358
• /
• 2017

Due to the increasing competition, automotive manufacturers have to manufacture highly safe and light vehicles. The parts which make up the body of the vehicle and absorb the energy in case of a crash, are usually manufactured with sheet metal forming methods such as deep drawing, bending, trimming and spinning. The part may get thinner, thicker, folded, teared, wrinkled and spring back based on the manufacturing conditions during manufacturing and the type of application methods. Transferring these effects which originate from the forming process to the crash simulations that are performed for vehicle safety simulations, makes accurate and reliable results possible. As a part of this study, firstly, the one-step and incremental sheet metal forming analysis (deep drawing + trimming + spring back) of vehicle front bumper beam and crash boxes were conducted. Then, crash performances for cases with and without the effects of sheet metal forming were assessed in the crash analysis of vehicle front bumper beam and crash box. It was detected that the parts absorbed 12.89% more energy in total in cases where the effect of the forming process was included. It was revealed that forming history has a significant effect on the crash performance of the vehicle parts.

• 자동차안전학회지
• /
• 제8권3호
• /
• pp.33-38
• /
• 2016

Recently, development in vehicle safety could increase interest in children's safety in vehicle collisions. But the research of children safety in vehicle collisions is not being conducted as many as that of adult's. Especially the study for the vehicle crash was not much. This study focused on the comparison of child safety between test protocols to evaluate children's safety in crash test. Injuries of Q6 and Q10 dummy were evaluated using FFRB (Full frontal rigid barrier) test and 40% ODB (Offset deformable barrier) test with one model vehicle. Even though the limit number of test, the tendency of injury criteria of Q6 and Q10 dummy between the test protocols was not conformed but injury criteria of Q6 and Q10 were not same between FFRB and 40% ODB.

• 자동차안전학회지
• /
• 제15권3호
• /
• pp.59-65
• /
• 2023

As advanced driving assistance system (ADAS) and autonomous driving performance continue to improve, existing crash accidents and crash types are changing. Accordingly, the collision angle and the seating posture of the occupant are changed. It is necessary to study how the occupant injury mechanism changes according to these different crash types. In this regard, a representative crash test mode was derived when the automatic emergency braking system (AEB), one of the autonomous driving performance, was applied to the representative car-to-car crash scenario in Korea. The derived crash test mode was used to analyse the mechanisms of collision injuries according to both impact angle and the occupant seating posture (reclined seat-back angle). The results obtained through this study can be utilized as reference data for the development of new crash evaluation methods and improvements in crash restraint systems for enhancing crash safety.

• 대한안전경영과학회지
• /
• 제14권3호
• /
• pp.33-38
• /
• 2012

Construction companies with the highest proportion in death crash has been devoting much effort to prevent the crash accidents. In general, a crash-proof worker has been wearing a seatbelt. However, the G construction company had happened in industrial settings when workers fail to abide by the rules. The Carabiner, one of the composing of Safety Belt, must endure the Allowable Load. In this study, the Industrial accidents and cause of the crash analysis in G Construction company is performed by empirical research. And we have been studied the empirical research to setting up of the allowable limit for Carabiner.

• 자동차안전학회지
• /
• 제15권4호
• /
• pp.39-47
• /
• 2023

Research on the safety of autonomous vehicle is being conducted in various countries, including the European Union, and computer simulation techniques so called 'Virtual Tool Chain' are mainly used. As part of the crash safety study of autonomous vehicle, 25 car to car collision scenarios were provided as a result of a real accident-based accident reproduction analysis study conducted by a domestic research institution, and a vehicle crash analysis was performed using the FE car to car model of the Honda Accord. In order to analyze the results of the car to car simulation and to construct a database, major crash parameters were selected as impact speed, angle, location, and overlap, and a method of defining them in an indexed form was presented. In order to compare the crash severity of each scenario, a value obtained by integrating the resultant acceleration measured by the ACU of the vehicle was applied. The equivalent collision test mode was derived by comparing the crash severity of the regulation test mode, 30 deg rigid barrier mode, in the same way.

• 한국도로학회논문집
• /
• 제9권3호
• /
• pp.91-100
• /
• 2007

도로를 이용하는 운전자들의 안전을 위해서 없어서는 안될 차량방호안전시설이 충격 흡수시설이다. 그러나 충격 흡수시설의 합리적이고 현실적인 설계방법이 미비한 상태임으로 대안없이 충돌시험에만 의존하고 있고 이것으로 인해 시간적, 물리적 손실이 큰 실정이다. 본 연구에서는 실차 충돌시험 데이터를 이용하여 삼차원의 복잡한 충돌거동에 대해 탑승자의 안전을 고려한 단자유도계 적용의 적합성을 증명하고 충격흡수시설의 거동을 분석함으로써 효과적인 단자유도계 충격흡수시설 설계법을 개발하고자 했다. 그리하여 단자유도계를 이용한 충돌해석 모델을 정립하고 충격흡수시설 설계법을 제시하였다. 충격흡수시설 설계법의 유효성을 검증하기 위해 단자유도계 설계법으로 CC2등급 충격흡수시설을 설계 제작하여 실차 충돌시험을 실시하였다. 성능시험 결과 매우 만족스러운 결과가 도출되었고 이로써 단자유도계 충격흡수시설 설계법은 충격흡수시설을 설계하는데 있어 유용한 방법중의 하나임이 증명되었다.

• 방사성폐기물학회지
• /
• 제17권2호
• /
• pp.263-278
• /
• 2019

항공기 충돌사고는 1970년대부터 원자력발전소의 인허가에 중요하게 고려되어 온 외부 사건의 하나였다. 9.11 테러 이후 세계 각국에서는 사고로 인한 항공기 충돌에 더하여 의도된 항공기 충돌에 대비한 안전성 평가를 수행해오고 있으며 일부 국가에서는 이를 법제화하여 인허가의 중요한 요건으로 다루고 있다. 항공기 충돌에 대한 안전성 평가는 여러가지 요인으로 인하여 쉽지 않은 작업이며 보다 신뢰성 있는 평가를 위한 연구개발이 세계 각국에서 진행 중이다. 본 논문에서는 각국의 항공기 충돌에 대비한 안전성 평가 요건의 법제화 현황을 사고로 인한 충돌과 의도된 충돌의 경우로 분리하여 정리하였다. 다양한 조건의 항공기 충돌에 대한 안전성 평가를 위하여 수행되어 온 연구 중 주요한 것들을 정리하였으며 특히 사용후핵연료 건식저장시설에 대한 내용을 위주로 다루었다.

• 한국수소및신에너지학회논문집
• /
• 제23권6호
• /
• pp.612-618
• /
• 2012

In this paper, in order to prevent electric shock of high voltage system of HFCV after crash test, insulation performance measurement methods were studied. Under conditions of in-use, insulation performance tests can be divided into measurement method using the vehicle's own RESS as DC voltage source and measurement method using DC voltage from off-vehicle sources. However, these tests can not be applied after a post-crash because parts of high voltage system cover should be removed, and insulation performance can be influenced during these tests. Therefore, we proposed post-crash insulation performance test methods for preventing electric shock through problem analysis of previous post-crash insulation performance tests. Also, test equipment which can measure voltage absence and total energy was developed. We verified performance of the equipment through experiments with vehicle test.