Browse > Article
http://dx.doi.org/10.12989/scs.2017.24.3.351

Steel processing effects on crash performance of vehicle safety related applications  

Doruk, Emre (TOFAS-FIAT, R&D Department)
Publication Information
Steel and Composite Structures / v.24, no.3, 2017 , pp. 351-358 More about this Journal
Abstract
Due to the increasing competition, automotive manufacturers have to manufacture highly safe and light vehicles. The parts which make up the body of the vehicle and absorb the energy in case of a crash, are usually manufactured with sheet metal forming methods such as deep drawing, bending, trimming and spinning. The part may get thinner, thicker, folded, teared, wrinkled and spring back based on the manufacturing conditions during manufacturing and the type of application methods. Transferring these effects which originate from the forming process to the crash simulations that are performed for vehicle safety simulations, makes accurate and reliable results possible. As a part of this study, firstly, the one-step and incremental sheet metal forming analysis (deep drawing + trimming + spring back) of vehicle front bumper beam and crash boxes were conducted. Then, crash performances for cases with and without the effects of sheet metal forming were assessed in the crash analysis of vehicle front bumper beam and crash box. It was detected that the parts absorbed 12.89% more energy in total in cases where the effect of the forming process was included. It was revealed that forming history has a significant effect on the crash performance of the vehicle parts.
Keywords
steel processing; vehicle safety; crash analysis; forming history;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Zhang, D., Li, Y., Liu, J., Xie, G. and Su, E. (2016), "A novel 3D optical method for measuring and evaluating springback in sheet metal forming process", Measurement, 92, 303-317.   DOI
2 Zonghong, X., Qun, Y. and Xiang, L. (2014), "Investigation on low velocity impact on a foam core composite sandwich panel", Steel Compos. Struct., Int. J., 17(2), 159-172.   DOI
3 Abedrabbo, N., Mayer, R., Thompson, A., Salisbury, C., Worswick, M. and Riemsdijk, I. (2009), "Crash response of advanced high-strength steel tubes: Experiment and model", Int. J. Impact Eng., 36(8), 1044-1057.   DOI
4 Azad, N.V. and Saeed, E. (2016), "Energy absorption characteristics of diamond core columns under axial crushing load", Steel Compos. Struct., Int. J., 21(3), 605-628.   DOI
5 Beik, V., Fard, M. and Jazar, R. (2016), "Crashworthiness of tapered thin-walled S-shaped structures", Thin-Wall. Struct., 102, 139-147.   DOI
6 Billur, E., Cetin, B. and Gurleyik, M. (2016), "New generation advanced high strength steels: Developments, trends and constraints", Int. J. Sci. Technol. Res., 2(1), 50-62.
7 Cafuta, G., Mole, N. and Stok, B. (2012), "An enhanced displacement adjustment method: Springback and thinning compensation", Mater. Des., 40, 476-487.   DOI
8 Chathbai, A. (2007), "Parametric Study of Energy Absorption Characteristic of a Rectangular Aluminum Tube Wrapped with E-Glass/Epoxy", Master Thesis; Wichita State University, Mechanical Engineering Department, KS, USA.
9 Durrenberger, L., Lemoine, X. and Molinari, A. (2011), "Effects of pre-strain and bake-hardening on the crash properties of a tophat section", J. Mater. Process. Technol., 211(12), 1937-1947.   DOI
10 Guler, M.A., Cerit, M.E., Bayram, B., Gerceker, B. and Karakaya, E. (2010), "The effect of geometrical parameters on the energy absorption characteristics of thin-walled structures under axial impact loading", Int. J. Adv. Manuf. Technol., 15(4), 377-390.
11 Najafi, A. and Rais-Rohani, M. (2012), "Sequential coupled process-performance simulation and multi-objective optimization of thin-walled tubes", Mater. Des., 41, 89-98.   DOI
12 Hassan, H., Traphoner, H., Guner, A. and Tekkaya, A.E. (2016), "Accurate springback prediction in deep drawing using prestrain based multiple cyclic stress-strain curves in finite element simulation", Int. J. Mech. Sci., 110, 229-241.   DOI
13 Jin, S.Y. and Altenhof, W. (2007), "Comparison of the load/displacement and energy absorption performance of round and square AA6061-T6 extrusions under a cutting deformation mode", Int. J. Crashworthiness, 12(3), 265-278.   DOI
14 Kiliclar, Y., Demir, O.K., Engelhardt, M., Rozgic, M., Vladimirov, I.N., Wulfinghoff, S., Weddeling, C., Gies, S., Klose, C., Reese, S., Tekkaya, A.E., Maier, H.J. and Stiemer, M. (2016), "Experimental and numerical investigation of increased formability in combined quasi-static and high-speed forming processes", J. Mater. Process. Technol., 37, 254-269.
15 Pipard, J.M., Balan, T., Abed-Meraim, F. and Lemoine, X. (2013), "Elasto-visco-plastic modeling of mild steels for sheet forming applications over a large range of strain rates", Int. J. Solid. Struct., 50(16), 2691-2700.   DOI
16 Schwindt, C.D., Stout, M., Iurman, L. and Signorelli, J.W. (2015), "Forming limit curve determination of a DP-780 steel sheet", Procedia Mater. Sci., 8, 978-985.   DOI
17 URL (2016b), Date viewed: November 24, 2016. http://www.euroncap.com/technical/protocols.aspx
18 Sun, G., Xu, F., Li, G. and Li, Q. (2014), "Crashing analysis and multiobjective optimization for thin-walled structures with functionally graded thickness", Int. J. Impact Eng., 64, 62-74.   DOI
19 Tamasco, M.C., Rais-Rohani, M. and Buijk, A. (2012), "Coupled finite element simulation and optimization of single- and multistage sheet-forming processes", Eng. Optimiz., 45(3), 357-373.
20 URL (2016a), Date viewed: November 24, 2016. http://www.boronextrication.com/2013/07/03/2014-mazda-6-body-structure/
21 URL (2016c), Date viewed: November 24, 2016. http://www.tradekorea.com/products/bumper_impact_beam.html
22 Veille, J.R., Toussaint, F., Tabourot, L., Vautrot, M. and Balland, P. (2015), "Experimental and numerical investigation of a short, thin-walled steel tube incremental forming process", J. Manuf. Process., 19, 59-66.   DOI
23 Xue, X., Liao, J., Vincze, G., Sousa, J., Barlat, F. and Gracio, J. (2016), "Modelling and sensitivity analysis of twist springback in deep drawing of dual-phase steel", Mater. Des., 90, 204-217.   DOI
24 Zhang, H. and Zhang, X. (2016), "Crashworthiness performance of conical tubes with nonlinear thickness distribution", Thin-Wall. Struct., 99, 35-44.   DOI