• 대한기계학회논문집A
• /
• 제33권12호
• /
• pp.1433-1441
• /
• 2009

In multibody dynamic analysis, one of the most important problems is to reduce computation times for real-time simulation. This paper presents the derivation procedure of equations of motion of a 6${\times}$6 autonomous vehicle in terms of chassis local coordinates which do not require coordinates transformation matrix to enhance efficiency for real-time dynamic analysis. Also, equations of motion are derived using the VT(velocity transformation) technique and symbolic computation method coded by MATLAB. The Jacobian matrix of the equations of motion of a system is derived from symbolic operations to apply the implicit integration method. The analysis results were compared with ADAMS results to verify the accuracy and approve the feasibility of real time analysis.

• Journal of Mechanical Science and Technology
• /
• 제15권6호
• /
• pp.693-698
• /
• 2001

The analysis of actuating forces (or torques) and joint reaction forces (or moments) are essential to determine the capacity of actuators, to control the system and to design the components. This paper presents an inverse dynamic analysis algorithm for flexible multibody systems with closed-loops in the relative joint coordinate space. The joint reaction forces are analyzed in Cartesian coordinate space using the inverse velocity transformation technique. The joint coordinates and the deformation modal coordinates are used as the generalized coordinates of a flexible multibody system. The algorithm is verified through the analysis of a slider-crank mechanism.

• 한국측량학회지
• /
• 제19권4호
• /
• pp.415-423
• /
• 2001

본 연구는 GPS상시관측소의 기준좌표계별 절대좌표 산정을 위한 적합한 방안의 결정을 위해 수행되었으며, 성균관대학교 구내에 설치된 상시관측소를 연구대상으로 하였다. 본 논문에서 ITRF97성과는 정밀도 0.001ppm의 정밀단독측위기법으로 GPS 데이터를 해석하여 산정하였고. WGS84와 대한민국 좌표계 성과는 결정된 ITRF97성과를 이미 제공되어 있는 파라메터들로 변환하여 산정하였다. ITRF97 성과의 경우 제트추진연구소에서 개발한 위치결정 알고리즘과 GIPSY-OASIS II(이하 GOA II)를 사용하여 산정하였다. WGS84와 대한민국 좌표계 성과는 IERS에서 전 지구적으로 계산한 좌표변환 계수와 2000년도 국립지리원에서 시행한 사업인 한국 지구중심 기준좌표계의 결정 사업을 통해 산정된 좌표변환 계수를 이용하여 산정하였으며, 이를 지역적인 GPS 데이터 해석을 통해 산정된 성과와 비교하여 그 활용성을 검증하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 추계학술대회 논문집 학회본부
• /
• pp.222-224
• /
• 1995

This paper deals with 3-dimensional missile guidance law. This presents the general optimal solution of the state equation which includes the target maneuvering as the Gauss-Markov processing. The main results ore about the transformation between the Cartesian coordinates on which both the guidance law and the filter are bused and the polar coordinates system in real missile guidance and measurement information. And the extended Kalman filter and adjustment of the estimated target acceleration by triangular functions is proposed solution to this transformation problem. It is shown that this proposed transformation is valid in real 3-dimensional guidance problem by the computer simulation.

• 한국측량학회지
• /
• 제12권1호
• /
• pp.69-76
• /
• 1994

본 연구는 측지원점의 지오이드 기준설정에 따른 WGS84 타원체와 Bessel 타원체간의 좌표변환특성을 파악하기 위해, 충남·북 지역내 11개 기준점의 GPS 관측자료를 토대로 원점의 Bessel 타원체면에 기준한 지오이드 고를 다양하게 가정하여 각 경우별로 타원체간의 평균지심편차량을 도출, 지역내 Bessel 지오이드를 모델링하고 이에 연계한 좌표변환을 수행하므로써 Bessel 지오이드 고의 변동에 따른 좌표변환정확도를 고찰한 것이다.

• 한국자동차공학회논문집
• /
• 제1권2호
• /
• pp.42-48
• /
• 1993

In this paper, dynamic collapse behavior of the rectangular tube under impact loading is anlayzed using nonlinear finite element method of shell element. In case of shell element formulation using corotational element coordinates system, dynamic collapse behavior is analyzed without initial imperfection, and with initial imperfection. This paper reveals that the collapse of a rectangular tue without initial imperfection is caused by an error of transformation of the corotational coordinates system.

• 한국측량학회지
• /
• 제15권1호
• /
• pp.29-39
• /
• 1997

최근 LIS/GIS측량과 지적조사 등의 분야에서는 위성측위시스템(GPS릿 활용이 보편화됨에 따라 지역측지계에서 지구중심좌표계로 변환하기 위한 국가변환요소를 필요로 하고 있다. 이 논문에서는 벳셀타원체 기준의 한국측지좌표와 WGS84좌표간의 변환요소를 가중변수에 의한 최소제곱해법에 따라 결정하였다. 국가기준점망의 31개 측점에 대한 GPS관측으로부터 결정된 지심3차원좌표의 GPS성과와 실용성과 또는 정밀1차성과간의 기준계 변환요소는 표준편차 1미터 이내이며 벳셀지오이드고를 고려할 때 GPS기선해석을 위한 초기좌표결정과 중축척지도의 변환과 LIS/GIS 데이터베이스의 수정에 이용할 수 있는 것으로 분석되었다.

• 전자공학회논문지B
• /
• 제33B권7호
• /
• pp.40-50
• /
• 1996

An unified compliant control algorithm to regulate the force by dual arms is proposed, where tow arms are treated as one arm in a kinematic viewpoint. The force error calculated form the information of two force/torque sensors attached to the end of each arm is transferred to minimum actuator coordinates, and then is distributed to total system actuator coordinates. The position adjustment at the total actuator coordinates is computed based on the effective computed based on the effective compliance matrix with respect to total actuator coordinates, which is obtained by coordinate transformation between the task coordinates and the total actuator coordinates. An experiment is carried out for dual arms with asymmetric kinematic structure to control an interaction force between manipulators and the environment. The performances of the proposed control algorithm are experimentally compared to those of dual arms employing master/slave scheme. The proposed compliant control algorithm not only ouperforms other algorithms, but also can be treated as an unified approach n the sense that it can be applied to arbitrary dual arm systems with general kinematic structures.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제33권3호
• /
• pp.233-240
• /
• 2011

Purpose: To apply a computer assisted navigation system to orthognathic surgery, a simple and efficient measuring algorithm calculation based on affine transformation was designed. A method of improving accuracy and reducing errors in orthognathic surgery by use of an optical tracking camera was studied. Methods: A total of 5 points on one surgical splint were measured and tracked by the Polaris $Vicra^{(R)}$ (Northern Digital Inc Co., Ontario, Canada) optical tracking system in two cases. The first case was to apply the transformation matrix at pre- and postoperative situations, and the second case was to apply an affine transformation only after the postoperative situation. In each situation, the predictive measuring value was changed to the final measuring value via an affine transformation algorithm and the expected coordinates calculated from the model were compared with those of the patient in the operation room. Results: The mean measuring error was $1.027{\pm}0.587$ using the affine transformation at pre- and postoperative situations and the average value after the postoperative situation was $0.928{\pm}0.549$. The farther a coordinate region was from the reference coordinates which constitutes the transform matrixes, the bigger the measuring error was found which was calculated from an affine transformation algorithm. Conclusion: Most difference errors were brought from mainly measuring process and lack of reproducibility, the affine transformation algorithm formula from postoperative measuring values by using of optic tracking system between those of model surgery and those of patient surgery can be selected as minimizing the difference error. To reduce coordinate calculation errors, minimum transformation matrices must be used and reference points which determine an affine transformation must be close to the area where coordinates are measured and calculated, as well as the reference points need to be scattered.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1183-1188
• /
• 2005

In this paper, we propose a 3D automated measuring system which measures the mandibular movements and the reference plane of the jaw movements. In diagnosis and treatment of the malocclusions, it is necessary to estimate the mandibular movements and the reference plane of the jaw movements. The proposed system is configured with double stereo-cameras, PC, two moving pattern plates(MPPs), two fixed pattern plates(FPPs) and one orbital marker. The virtual pattern plate is applied to calculate the homogeneous transformation matrices which describe the coordinates systems of the FPP and MPP with respect to the world coordinates system. To estimate the parameters of the hinge axis, the Euler's theorem is applied. The hinge axis points are intersections between the FPPs and the hinge axis. The coordinates of a hinge axis point with respect to the MPP coordinates system are set up to fixed value. And then, the paths of the jaw movement can be calculated by applying the homogeneous transformation matrix to fixed hinge axis point. To examine the accuracy of the measurements, experiments of measuring the hinge axis points and floating paths of them are performed using the jaw motion simulator. As results, the measurement errors of the hinge axis points are within reasonable boundary, and the floating paths are very similar to the simulator's moving path.