• 제어로봇시스템학회논문지
• /
• 제19권10호
• /
• pp.867-872
• /
• 2013

Many practical processes in industry have nonlinearities of some forms. One commonly encountered form is actuator saturation which can cause a detrimental effect known as integrator windup. Therefore, a strategy of attenuating the effects of integrator windup is required to guarantee the stability and performance of the overall control system. In this paper, optimal tuning of a PID (Proportional-Integral-Derivative) controller with an anti-windup scheme is presented to enhance the tracking performance of the PID control system in the presence of the actuator saturation. First, we investigate effective anti-windup schemes. Then, the parameters of both the PID controller and the anti-windup scheme are optimally tuned by an EA (Evolutionary Algorithm) such as the IAE (Integral of Absolute Error) is minimized. A set of simulation works on two high-order processes demonstrates the benefit of the proposed method.

• 전자공학회논문지T
• /
• 제35T권3호
• /
• pp.76-86
• /
• 1998

2관성 공진(TMS: Two-Mass Spring) 시스템은 비틀림 진동을 다루기 위하여 고려할 수 있는 가장 간단한 모델이다. 이러한 시스템은 비틀림 진동을 억제하며, 원하는 특성을 달성하기 위한 제어기 설계가 요구된다. 본 논문에서는 2관성 공진 시스템에 대하여 상태 피드백을 고려하고, 각 상태가 응답성능에 미치는 영향을 살펴본다. 이 결과와 상태 피드백의 이득을 이용하여 제어기의 설계 매개변수와 LQ 및 H/sub ∞/ 제어의 하중함수 결정에 대한 기본 지침을 제시한다.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2005년도 춘계학술대회 논문집
• /
• pp.149-153
• /
• 2005

In the cardiovascular system, the waveform of the pulsatory blood pressure appears variously due to the cardiac impulse and compliance of blood vessels and arm tissue. We have constructed a blood pressure simulator to investigate effects of mechanical properties of artery walls and tissue on blood pressure measurements. The blood pressure simulator is designed to reproduce wave forms of blood pressure in human arteries. To minimize tracking error, we use a linear control valve, and adapt a hybrid control scheme which consists of a feedback controller and a feedforward controller. Any form of the pressure wave can be reproduced, changing function of the wave form in the computer connected to the simulator for control. From experiments, it has been shown that the simulator reproduces wave forms very well, and that the hybrid scheme adapted is superior to the feedback controller.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2005년도 학술대회 논문집
• /
• pp.345-347
• /
• 2005

The electric demands increase, financial need for new power plant constructions and environmental problem have led to search for more efficient energy production and load management. To minimize the construction of power plants and reduce total power consumption include installation of demand controller to industrial applications. Accordingly to maximize the load control by the diffusion of demand controller, govermental economic supports as well as the analysis of energy saving effects. This paper presents the cost-effectiveness analysis for DSM program evaluation and case study to analyze demand controller DSM program.

• Journal of Power Electronics
• /
• 제14권4호
• /
• pp.764-777
• /
• 2014

This study analyzes the mathematical relationship between DC-link voltage and system parameters for shunt active power filters (APFs). Analysis and mathematical deduction are used to determine the required minimum DC-link voltage for APF. A novel adaptive DC-link voltage controller for the three-phase four-wire shunt APF is then proposed. In this controller, the DC-link voltage reference value will be maintained at the required minimum voltage level. Therefore, power consumption and switching loss will effectively decrease. The DC-link voltage can also adaptively yield different DC-link voltage levels based on different harmonic currents and grid voltage levels and thus avoid the effects of harmonic current and grid voltage fluctuation on compensation performance. Finally, representative simulation and experimental results in a three-phase four-wire center-split shunt APF are presented to verify the validity and effectiveness of the minimum DC-link voltage design and the proposed adaptive DC-link voltage controller.

• 전자공학회논문지SC
• /
• 제37권3호
• /
• pp.33-43
• /
• 2000

특이섭동 기법을 이용한 제어 시스템의 설계가 가능하기 위해서는 무엇보다도, 빠른 동력학의 안정성이 중요하다. 그런데, 제어기의 디지털 구현으로 인하여, 이 빠른 동력학의 안정도가 영향을 받을 수 있다. 본 논문은 최근의 개발된 우수한 성능의 특이섭동 기반의 STT 자동조정장치(autopilot) 설계의 경우를 들어 이러한 특이섭동 기법에 기반하여 설계된 제어 시스템에 대한 샘플링 영향을 조사하고 개선된 제어기 설계의 예를 제시하여, 특이섭동 기반 제어 시스템 에 대한 샘플링 영향 분석의 필요성 및 유효성을 밝혔다.

• Journal of Power Electronics
• /
• 제16권1호
• /
• pp.18-26
• /
• 2016

This paper proposes a compensation algorithm for reducing a specific ripple component on synchronous reference frame phase locked loop (SRF-PLL) in grid-tied single-phase inverters. In general, SRF-PLL, which is based on all-pass filter to generate virtual voltage, is widely used to estimate the grid phase angle in a single-phase system. In reality, the estimated grid phase angle might be distorted because the phase difference between actual and virtual voltages is not 90 degrees. That is, the phase error is caused by the difference between cut-off frequency of all-pass filter and grid frequency under grid frequency variation. Therefore, the effects on phase angle and output current attributed to the phase error are mathematically analyzed in this paper. In addition, the proportional resonant (PR) controller is adapted to reduce the effects of phase error. The validity of the proposed algorithm is verified through several simulations and experiments.

• 전기학회논문지
• /
• 제59권1호
• /
• pp.176-183
• /
• 2010

This paper presents some practical design issues that should be carefully considered when a notch filter is included in a linear feedback controller. A notch filter is generally used to compensate the effects of resonant modes that may result in poor performance. It is very common that the practical engineers prefer to add such a notch filter after having previously designed a feedback controller without the filter. It is known that the resulting performance by this approach is not seriously different from when a feedback controller is designed for a plant previously compensated by a notch filter. However, we will point out that there are some cases where both approaches have different performances. In order to show this, a low-order controller design using the partial model matching method has been applied to a linear time invariant (L Tn model. The results suggest that there is a tendency to achieve much better time responses in terms of reducing the overshoot and shortening the settling time, and in the frequency domain characteristics such as the sensitivity function and the stability margins when the design of a feedback controller after including a notch filter is carried out.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제50권12호
• /
• pp.575-583
• /
• 2001

It is hard to obtain good robust performance and robust stability for uncertain and time-varying system. The robust 2-DOF controller is frequently used to obtain the desired response and the good robustness. Two controllers can be independently designed. Generally, one controller reduces sensitivity to parameter variations, nonlinear effects, and other disturbances. On the other hand, the other controller reduces the error between the desired command and output. In this paper, the various robust perfect MFCs(model-following controllers) combined with TDC(Time Delay Control) are designed, and the imperfect stable MFC combined with TDC and SMC(Sliding Mode Control) is proposed. These controllers are based on the method of designing robust 2-DOF controllers for dynamic system with uncertainty. The performance of the proposed imperfect sable MFC has been evaluated through computer simulations. The simulation results indicate that the proposed controller shows the excellent performance characteristics for an overhead crane with uncertain and time-varying parameters.

• 전기전자학회논문지
• /
• 제2권2호
• /
• pp.299-308
• /
• 1998

본 논문에서는 신뢰할 수 있는 SRM 구동시스템과 기존의 PI제어기에 4개의 규칙으로 이루어진 FLM(Fuzzy Logic Modifier)를 제안하였다. 저가격 원칩 마이크로컨트롤러인 인텔사의 i80C196KC는 속도 제어기와 초기 기동을 포함한 SRM 구동 컨트롤러를 설계하기 위해 사용되었다. 폐루프 시스템에 안정된 효과를 보이는 FLM을 Pl 제어기에 추가함으로써 부적절하게 설정된 PI 제어기의 이득값에 대해 강인한 제어성능을 보인다. 시뮬레이션 및 실험결과는 6/4극 SRM에 대해 제안된 제어 방식이 우수함을 보여준다.