• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1642-1645
• /
• 2007

The brightness of LED changes according to the current flowing through LEDs. The current mirror was used to drive LEDs effectively. The reference current of the current mirror was usually controlled by the resistor but the size of this resistor is very large and this resistor consumes too much power for high power LED backlight driving. The reference current of the current mirror LED driver was controlled by using flyback converter at small size with low power consumption in this paper. The concept of active current source was presented.

• Proceedings of the IEEK Conference
• /
• 2004.06b
• /
• pp.395-398
• /
• 2004

High-linearity voltage-controlled current sources (VCCSs) circuits for wide voltage-controlled oscillator and automatic gun control were proposed. The VCCS consists of emitter follower for voltage input, two common-base amplifier which their emitter connected for current output, and current mirror which connected the two amplifier for large output current. The VCCS used only five transistors and a resistor without an extra bias circuit. Simulation results show that the VCCS has current output range from 0mA to 300mA over the control voltage range from 1V to 4.8V at supply voltage 5V. The linearity error of output current has less than $1.4\%$ over the current range from 0A to 300mA.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.5 no.1
• /
• pp.70-75
• /
• 1980

In this paper, it presents that novel Voltage-Controlled Nagativd-Resistance Circuit which composed by two Current mirror, and this presumes, interprets Co-operation of Circuit. Indeed, its to increase the peak Voltage Vp, whch is done by inserting a Zener Diode in series with R-experimental results and to presents the various Negative-Resistance Characteristic Confirmed with Conincided Substantially presumed realization of Circuit corperation and Calculated was Checked through experiments.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.7
• /
• pp.89-96
• /
• 2004

High-linearity voltage-controlled current sources (VCCSs) circuits for wide voltage-controlled oscillator and automatic gain control are proposed. The VCCS consists of emitter follower for voltage input, two common-base amplifier which their emitter connected for current output, and current mirror which connected the two amplifier for large output current. The VCCS used only five transistors and a resistor without an extra bias circuit. Simulation results show that the VCCS has current output range from 0㎃ to 300㎃ over the control voltage range from 1V to 4.8V at supply voltage 5V. The linearity error of output current has less than 1.4% over the current range from 0A to 300㎃.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.2
• /
• pp.212-215
• /
• 2016

In this paper, a 5.08 GHz Ring Voltage Controlled Oscillator(Ring VCO) was implemented using $0.18{\mu}m$ standard CMOS technology. The proposal Ring VCO is 3-stage structure. This research confirmed that the each stage's different transistor size ratio influence the current change and alter power consumption consequentially. This circuit is formed to control the current thereby adding the Current Mirror and to tune the frequency by supplying control voltage. It has an 65.5 %(1.88~5.45 GHz) tuning range. The measured output power is -0.30 dBm. The phase noise is -87.50 dBc/Hz @1 MHz offset with operating frequency of 5.08 GHz fundamental frequency. The total power consumption of Ring VCO is 31.2 mW with 2.4 V supply voltage.

• Transactions on Electrical and Electronic Materials
• /
• v.14 no.5
• /
• pp.235-241
• /
• 2013

A low power CMOS control circuit is applied in an integrated DC-DC buck converter. The integrated converter is composed of a feedback control circuit and power block with 0.35 ${\mu}m$ CMOS process. A current-sensing circuit is integrated with the sense-FET method in the control circuit. In the current-sensing circuit, a current-mirror is used for a voltage follower in order to reduce power consumption with a smaller chip-size. The N-channel MOS acts as a switching device in the current-sensing circuit where the sensing FET is in parallel with the power MOSFET. The amplifier and comparator are designed to obtain a high gain and a fast transient time. The converter offers well-controlled output and accurately sensed inductor current. Simulation work shows that the current-sensing circuit is operated with an accuracy of higher than 90% and the transient time of the error amplifier is controlled within $75{\mu}sec$. The sensing current is in the range of a few hundred ${\mu}A$ at a frequency of 0.6~2 MHz and an input voltage of 3~5 V. The output voltage is obtained as expected with the ripple ratio within 1%.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.4 no.4
• /
• pp.269-274
• /
• 2004

Current delivery system, in which the analog current produced by a unique DAC circuit is stored into a current-memory circuit and delivered in a time-divided sequence, shows variation of output current as low as 4% in a current source data-driver IC for AM-OLED driven by a current-programmed method without any fuse repairing after fabrication. This driver IC has 54 outputs and can sink constant current as low as 3 ${\mu}A$ with 6-bit analog levels. Such a low current level without variation can hardly be obtained by an ordinary MOS transistor because the current level is in the sub-threshold region and changes exponentially with threshold voltage variation. Thus we adopted a current mirror circuit composed of bipolar transistors to supply well-controlled current within a nano-ampere range.

• Journal of the Optical Society of Korea
• /
• v.16 no.3
• /
• pp.313-317
• /
• 2012

We have evaluated a 1.3 ${\mu}m$ vertical-cavity surface-emitting laser (VCSEL), whose bottom mirror and central active layer were grown by metal organic chemical vapor deposition (MOCVD) and whose top mirror was covered with a dielectric coating, for 10 Gb/s data transmission over single-mode fibers (SMFs). Successful demonstration of error-free transmission of the directly modulated VCSEL signals at data rate of 10 Gb/s over a 10 km-long SMF was achieved for operating temperatures from $20^{\circ}C$ to $60^{\circ}C$ up to bit-error-rate (BER) of $10^{-12}$. The DC bias current and modulation currents are only 7 mA and 6 mA, respectively. The results indicate that the VCSEL is a good low-power consuming optical signal source for 10 GBASE Ethernet applications under controlled environments.

• Current Optics and Photonics
• /
• v.6 no.4
• /
• pp.420-429
• /
• 2022

In this paper, the details and design process of an optical system for space target detection cameras are introduced. The whole system is divided into three structures. The first structure is a short-focus visible light system for rough detection in a large field of view. The field of view is 2°, the effective focal length is 1,125 mm, and the F-number is 3.83. The second structure is a telephoto visible light system for precise detection in a small field of view. The field of view is 1°, the effective focal length is 2,300 mm, and the F-number is 7.67. The third structure is an infrared light detection system. The field of view is 2°, the effective focal length is 390 mm, and the F-number is 1.3. The visible long-focus narrow field of view and visible short-focus wide field of view are switched through a turning mirror. Design results show that the modulation transfer functions of the three structures of the system are close to the diffraction limit. It can further be seen that the short-focus wide-field-of-view distortion is controlled within 0.1%, the long-focus narrow-field-of-view distortion within 0.5%, and the infrared subsystem distortion within 0.2%. The imaging effect is good and the purpose of the design is achieved.

• Journal of Sensor Science and Technology
• /
• v.18 no.2
• /
• pp.128-134
• /
• 2009

Integrated circuit of a new neuron chain with a synapse function for Hodgkin-Huxley model which is a good electrical model about a real biological neuron is implemented in a $0.5{\mu}m$ 1 poly 2 metal CMOS technology. Pulse type neuron chain consist of series connected current controlled single neurons through synapses. For the realization of the single neuron, a pair of voltage mode oscillators using operational transconductance amplifiers and capacitors is used. The synapse block which is a connection element between neurons consist of a voltage-current conversion circuit using current mirror. SPICE simulation results of the proposed circuit show 160 mV amplitude pulse output and propagation of the signal through synapses. Measurements of the fabricated pulse type neuron chip in condition of ${\pm}2.5\;V$ power supply are shown and compared with the simulated results.