• Journal of Power Electronics
• /
• 제16권3호
• /
• pp.1012-1024
• /
• 2016

This study deals with an on-line software fault detection, localization, and system reconfiguration method for electrical system drives composed of three-phase AC/DC/AC converters and three-phase permanent magnet synchronous machine (PMSM) drives. Current sensor failure (outage), speed/position sensor loss (disconnection), and damaged DC-link voltage sensor are considered faults. The occurrence of these faults in PMSM drive systems degrades system performance and affects the safety, maintenance, and service continuity of the electrical system drives. The proposed method is based on the monitoring signals of "abc" currents, DC-link voltage, and rotor speed/position using a measurement chain. The listed signals are analyzed and evaluated with the generated residuals and threshold values obtained from a Sliding Mode Current-Speed-DC-link Voltage Observer (SMCSVO) to acquire an on-line fault decision. The novelty of the method is the faults diagnosis algorithm that combines the use of SMCSVO and adaptive thresholds; thus, the number of false alarms is reduced, and the reliability and robustness of the fault detection system are guaranteed. Furthermore, the proposed algorithm's performance is experimentally analyzed and tested in real time using a dSPACE DS 1104 digital signal processor board.

• 대한기계학회논문집B
• /
• 제27권6호
• /
• pp.726-735
• /
• 2003

A Process of 3-D Particle image velocimetry, called here, as '3-D volume PIV' was developed for the full-field measurement of 3-D complex flows. The present method includes the coordinate transformation from image to camera, calibration of camera by a calibrator based on the collinear equation, stereo matching of particles by the approximation of the epipolar lines, accurate calculation of 3-D particle positions, identification of velocity vectors by 3-D cross-correlation equation, removal of error vectors by a statistical method followed by a continuity equation criterior, and finally 3-D animation as the post processing. In principle, as two frame images only are necessary for the single instantaneous analysis 3-D flow field, more effective vectors are obtainable contrary to the previous multi-frame vector algorithm. An Experimental system was also used for the application of the proposed method. Three analog CCD camera and a Halogen lamp illumination were adopted to capture the wake flow behind a bluff obstacle. Among 200 effective particle s in two consecutive frames, 170 vectors were obtained averagely in the present study.

• 한국멀티미디어학회논문지
• /
• 제19권2호
• /
• pp.224-232
• /
• 2016

The methodology to visualize the shape of blood vessel and its blood flow have been attracting as a very interesting problem to forecast and examinate a disease in thrombus precursor protein. May previous visualization researches have been appeared for designing the blood vessel and also modeling the blood flow using a doppler imaging technique which is one of nondestructive testing techniques. General visualization methods are to depict the blood flow obtained from doppler effects with fragmentary stream lines and also visualize the blood flow model using volume rendering. However, these visualizeation techniques have the disadvantage which a set of small line segments does not give the overall observation of blood flows. Therefore, we propose a visualization system which reconstruct the continuity of the blood flow obtained from doppler effects and also visualize the blood flow with the vector field of blood particles. This system will use doppler phase difference from medical equipments such as OCT with low penetration and reconstruct the blood flow by the curvature estimation from vector field of each blood particle.

• 한국인쇄학회지
• /
• 제10권1호
• /
• pp.81-90
• /
• 1992

The charater of standing box printing reguires a rich representation in a light and a shade of color and caues the modern photographs to be abundant of the ink and also shows the continuity of which any other printing is incapable because of its profound gradation. The clear printing in gravure can be said to be due to the good transfer of the ink - the completion of the transference of the ink into the stencil paper and the clear transference of the printing tone. The most inportant matter is the distance between the printing press and the doctor line. It is the matter of the structure and arrangement because of giving the most affect on the dryness of the ink in the cell. The glue of the ink in gravure changes by the kinds of the dye and the cellusolve used. To make the printing somoothly progressive from the high glue of the ink to the low glue of the ink will have to be used, which will be possible to choose the ester.ose the ester.

• 한국인쇄학회지
• /
• 제10권1호
• /
• pp.55-67
• /
• 1992

The character of standing box printing reguires a rich representation on a light and a shade of color and cause the modern photographs to be abundant of the ink and also show the continuity of which any other printing is incapable because of its profound gradation.The clear printing in gravure can be said to be due to the good transfer of the ink-the completion of the transference of the ink into the stencil paper and the clear transference of the printing tone.The most inportant matter is the distance between the printing press and the doctor line. It is the matter of the structure and arrangement because of giving the most affect on the dryness of the ink in the cell.The glue of the ink in gravure changes by the kinds of the dye and the cellusolve used.

• 아동학회지
• /
• 제21권2호
• /
• pp.119-133
• /
• 2000

This research examined factors that differentiate the child-rearing practices of 495 Japanese fathers living in Tokyo and 526 Korean fathers living in Seoul. All subjects were fathers of school-age children, Findings were that the sense of devotion/reward in life is the decisive variable behind affection in the child-rearing practices of fathers of both nations, In the Japanese sample, the less they felt financial burdens and psychological constraints, the more affection shown in their child-rearing practices. In the Korean sample, more affection was noted among fathers whose primary views on child-rearing were centered on the continuity of the family line. Such socio-demographic variables as fathers working long hours and/or mothers working outside the home had a negligible influence of affection driven child-rearing practices of both groups.

• 한국전기전자재료학회논문지
• /
• 제13권12호
• /
• pp.1039-1044
• /
• 2000

Breakdown voltage model and expertiments are compared for discharge cells of AC plasma display panel. In the model, discharge paths are assumed to be initial electric field lines and the one-dimensional continuity equation is applied to the charged particle transport at each field line. The comparisons are performed in the wide range of gas pressure (50-600torr), Xe partial pressure over total pressure (1-6%), sustain electrode gap(100-1000$\mu\textrm{m}$), wall height(130, 300$\mu\textrm{m}$), and voltage pulse width(2-6${\mu}$s). The presented breakdown voltage model well agree with experiments in the above wide range. The increase of breakdown voltage with the decrease of the width(L) of protruding electrode is also described by the model.

• 대한조선학회지
• /
• 제24권3호
• /
• pp.9-16
• /
• 1987

In this paper, the fluid flow in the two-dimensional tank is analyzed by the Finite Difference Method. The Navier-Stokes equation is modified for the tank fixed coordinate system. For the treatment of the free surface, the Volume of Fluid Method by Hirt and Nichols is adopted. The continuity equation and the Poisson equation which is derived from the Navier-Stokes equation to find the pressure are solved by the Successive-Line-Overrelaxation Method. The comparison of the calculated results with experimental data show a favorable agreement. The fluid flow in the two-dimensional tank can be predicted reasonably before the free surface reaches breaking by this numerical method.

• 한국정보처리학회논문지
• /
• 제7권4호
• /
• pp.1271-1278
• /
• 2000

A general curve and surface is a basic method to generate Free-form object using the fundamental properties of blending function. In typical method, there is an overhead of calculating to present Free-form object with the line segments and interpolation algorithm, In this paper, for resolving this problem efficiently, it will propose the flexible Free-form curves/surfaces using Ball curve shape-preserving property. This method includes Geometric Continuity that is needed to design Free-form Surface of high degree consisted with many curves. Also, when lots of data are reduced using Geometric Property of Free-form curves, the shape-preserving property of resulting object can be maintained, then it can represent any Free-form object with less calculating .

• 전자공학회논문지S
• /
• 제35S권2호
• /
• pp.114-125
• /
• 1998

In this study, for the first time, we propose the ADI(Adaptive De-Interlacing) algorithm, which improves visually and subjectively, horizontal and vertical edges on the image processed by the ELA (Edge Based Line Average) method. The proposed ADI algorithm enlargesthe window size to 5*3 in order to utilize the feature of the continuity of edges, and the adaptive interpolator is employed to decide adaptiely horizontal, diagonal, and vertical edges. Based on the results of the compter simulation, it is confimed that the new ADI algorithm improve the PSNR by 0.5dB in the Lena image with 512*512 size and by 0.4dB in the sequence image of a salesman, respectively. For the horizontal and vertial edges on the still and salesman sequence images, the proposed ADI algorithm has better visulal improvement than the conventional ELA algorithm.