• Journal of Korean Ophthalmic Optics Society
• /
• v.11 no.4
• /
• pp.317-322
• /
• 2006

For this study we made up a question investigation to analyze a grade of satisfaction and a side effect about the prescription actual condition of contact lens of person with astigmatism among the person who has a error of refraction. The whole patient of refractive error was 46 person, there were 11 person who only wear spectacles by correction of visual acuity among person to a question investigation and 35 person who only wear contact lens. Under investigation 35 person who only wear contact lens, there were 25 person who experience the problem which occurs because of contact lens wearing for a long time. The most patient who made up a question investigation very choose remainder item except for item of very satisfaction. The their reason that could not satisfaction was non corrected astigmatism, wrong prescription, wrong Base curve, out of life span etc.

• Tribology and Lubricants
• /
• v.36 no.5
• /
• pp.262-266
• /
• 2020

Herein, we present a numerical investigation of wear analysis of sliding systems with a constant speed subjected to Archard's wear law. For this investigation, we compared two methods: eigen-wear analysis and adaptive meshing technique. The eigen-wear analysis is advantageous to predict the evolution of contact pressure due to wear using the initial contact pressure and contact stiffness. The adaptive meshing technique in finite element analysis is employed to obtain transient wear behavior, which needs significant computational resources. From the eigen-wear analysis, we can determine the appropriate element size required for finite element analysis and the time increment required for wear evolution by a dimensionless variable above a certain value. Since the prediction of wear depends on the maximum contact pressure, the finite element model should have a reasonable representation of the maximum contact pressure. The maximum contact pressure and wear amount according to this dimensionless variable shows that the number of fine meshes in the contact area contributes more to the accuracy of the wear analysis, and the time increment is less sensitive when the number of contact nodes is significantly larger. The results derived from a two-dimensional wear model can be applied to a three-dimensional wear model.

• Tribology and Lubricants
• /
• v.15 no.2
• /
• pp.164-170
• /
• 1999

Gerotor is widely used as a hydraulic pump or motor, by virtue of its volume changing ability. Performance deterioration of a gerotor hydraulic motor mainly due to the wear come from the contact between inner rotor with trochoidal curve and outer rotor with circular arc profile. This research covers the basic investigation about the contact forces of a gerotor hydraulic motor using analytic method. The influence of the eccentricity and the radius of circular arc teeth on the contact stress was evaluated.

• Pediatric Infection and Vaccine
• /
• v.23 no.2
• /
• pp.94-101
• /
• 2016

Purpose: This study aimed to describe the results of a contact investigation on health care workers after exposure to a house officer with smear-positive pulmonary tuberculosis (TB). Methods: Eighty nine out of 101 subjects who had close contact with the index patient agreed to be enrolled in the investigation. The first contact investigation was conducted approximately 30 days after the index patient's onset of symptoms, followed by the second investigation after 10 weeks. In both, clinical manifestations were studied, and chest X-ray and tuberculin skin test (TST)/QuantiFERON-TB Gold (QFT-G) in dual screening strategy were conducted. Results: The first TST resulted in positive in 34 subjects (38.2%). QFT-G was conducted on 16 subjects who tested positive in the first TST and aged under 36. Six of them (37.5%) were positive. The second TST was conducted on 41 subjects with negative results in the first TST. Seventeen (41.5%) were positive and among them, three (17.6%) showed positive QFT-G. None of the subjects were diagnosed with active TB. The probability of TB infection through contact with the index patient was 7.3% (3/41) in dual screening strategy while it was 41.5% (17/41) in TST strategy. Conclusions: This first hospital-setting contact investigation for tuberculosis in Korea revealed that latent tuberculosis infection (LTBI) rates vary depending on different diagnostic strategies. This indicates the need for systematic guidelines for diagnosing LTBI in health care workers who have professional exposure to TB.

• Structural Engineering and Mechanics
• /
• v.3 no.3
• /
• pp.289-297
• /
• 1995

A finite element algorithm for consideration of contact constraints is presented. It is characterized by introducing the geometric constraints, resulting from contact conditions, directly into the algebraic system of equations for the incremental displacements of an incremental iterative solution procedure. The usefulness of the proposed algorithm for efficient solutions of contact problems involving large displacements and large strains is demonstrated in the numerical investigation.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1998.12a
• /
• pp.115-122
• /
• 1998

• Bulletin of the Korean Chemical Society
• /
• v.35 no.8
• /
• pp.2415-2418
• /
• 2014

In this report, the contact resistance between "electrode" and "lead" is investigated for reasonable measurements of samples' resistance in a polypyrrole (PPy) nanowire device. The sample's resistance, including "electrode-lead" contact resistance, shows a decrease as force applied to the interface increases. Moreover, the sample's resistance becomes reasonably similar to, or lower than, values calculated by resistivity of PPy reported in previous studies. The decrease of electrode-lead contact resistance by increasing the applying force was analyzed by using Holm theory: the general equation of relation between contact resistance ($R_H$) of two-metal thin films and contact force ($R_H{\propto}1/\sqrt{F}$). The present investigation can guide a reliable way to minimize electrode-lead contact resistance for reasonable characterization of nanomaterials in a microelectrode device; 80% of the maximum applying force to the junction without deformation of the apparatus shows reasonable values without experimental error.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1994.10a
• /
• pp.157-164
• /
• 1994

Finite element analysis of material deformation is successfully utilized to understand metal forming processes such as forging, extrusion and deep drawing. However, such analysis involves contact problems; a free node touches a die surface and a contact node slips along the die surface. In the present investigation, appropriate contact algorithms were developed assuming that a three dimensional surface can be divided into bilinear patches and that nodal velocities are linear during an incremental time. The algorithms were coded into a computer program and tested for a simple surface. Comparison of the test result with that obtained from a commercial code is presented and discussed.

• Communications of the Korean Mathematical Society
• /
• v.35 no.4
• /
• pp.1283-1297
• /
• 2020

The goal of this paper is the introduction of hyper generalized 𝜙-recurrent (k, 𝜇)-contact metric manifolds and of quasi generalized 𝜙-recurrent (k, 𝜇)-contact metric manifolds, and the investigation of their properties. Their existence is guaranteed by examples.

• Transactions on Electrical and Electronic Materials
• /
• v.16 no.3
• /
• pp.139-141
• /
• 2015

Contact resistance of interface between the channel layers and various S/D electrodes was investigated by transmission line method. Different electrodes such as Ti/Au, a-IZO, and multilayer of a-IGZO/Ag/a-IGZO were compared in terms of contact resistance, using the transmission line model. The a-IGZO TFTs with a-IGZO/Ag/a-IGZO of S/D electrodes showed good performance and low contact resistance due to the homo-junction with channel layer.