• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.6
• /
• pp.372-376
• /
• 2018

The effects of off-state bias stress on the characteristics of p-type poly-Si TFT were investigated. To reduce the gate-induced drain leakage (GIDL) current, the off-state bias stress was changed by varying Vgs and Vds. After application of the off-state bias stress, the Vgs causing GIDL current was dramatically increased from 1 to 10 V, and thus, the Vgs margin to turn off the TFT was improved. The on-current and subthreshold swing in the aged TFT was maintained. We performed a technology computer-aided design (TCAD) simulation to describe the aged characteristics. The aged-transfer characteristics were well described by the local charge trapping. The activation energy of the GIDL current was measured for the pristine and aged characteristics. The reduced GIDL current was mainly a thermionic field-emission current.

• Journal of KIISE:Computer Systems and Theory
• /
• v.31 no.11
• /
• pp.658-672
• /
• 2004

Multimedia applications are required to process the huge amount of data at high speed in real time. The memory reference instructions such as loads and stores are the main factor which limits the high speed execution of processor. To enhance the memory reference speed, cache prefetch schemes are used so as to reduce the cache miss ratio and the total execution time by previously fetching data into cache that is expected to be referenced in the future. In this study, we present an advanced data cache prefetching scheme that improves the conventional RPT (reference prediction table) based scheme. We considers the cache line size in calculation of the address stride referenced by the same instruction, and enhances the prefetching algorithm so that the effect of prefetching could be maintained even if an irregular address stride is inserted into the series of uniform strides. According to experiment results on multimedia benchmark programs, the cache miss ratio has been improved 29% in average compared to the conventional RPT scheme while the bus usage has increased relatively small amount (0.03%).

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.5
• /
• pp.487-492
• /
• 2018

Recently, various applications for image processing have been ported to the mobile environment due to the expansion of the image shooting on the mobile device. However, in the case of extracting the image foreground, which is one of the most important functions of image synthesis, is difficult since it needs complex calculation. In this paper, we propose an video synthesis technique that can divide images captured by mobile devices into foreground / background and combine them in real time on target images. Considering the characteristics of mobile shooting, our system can extract automatically foreground of input video that contains weak motion when shooting. Using SIMD and GPGPU-based acceleration algorithms, SD-quality images can be processed on mobile in real time.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.5
• /
• pp.331-337
• /
• 2020

The study is underway with the goal of developing an app that will replace vernier calipers using a smartphone's high-performance camera. The specifications of the camera mounted on recent smart phones have evolved so that usually has a 12 Mpixels of image sensor and its size of the pixel is 1.4㎛ and the size of the image sensor is 1 / 2.55 in. The proposed algorithm will apply to develop a precision measuring application that will compete with the Vernier calipers. Most existing applications cannot guarantee an accuracy in scale because the scale of the ruler displayed on the image is unclear or the size of the measurement object varies depending on the distance between the camera and the measurement object. In addition, another accurate measuring tools using lasers are also available, but they are limited because they are expensive. Therefore, if easy-to-carry and precise applications are developed, it is possible to substitute existing measurement tools. The proposed correction algorithm is an algorithm that automatically corrects the distorted source image using the shape and size information of the known template. The e-calipers are applications that display the distance when the area to be measured is specified in the corrected image.

• 대한공업교육학회지
• /
• v.33 no.1
• /
• pp.213-232
• /
• 2008

The purpose of this study is that after developing and applying multimedia rich project-based learning methods in a Korean Special high school(Industrial and Technical Area), to provide how the learners recognize the effectiveness for it and to obtain the implication from effectiveness which they recognized. This study was conducted as action research based on a high school situation. The study included 100 participants in two classes purposively selected from 9 classes at 450 student high school. Data were collected through observations, surveys and interview. Results indicated the multimedia rich project-based learning allowed students to understand the contents of major subject overall, improve the handling skill for computer multimedia and be better at investigating and organizing skill for subject content. Also, it allowed them to improve interaction among students and participation, motivation, satisfaction, interest and confidence for learning. And there was close cooperation with and among group members to create better products.. Finally, the flexibility in the project-based learning environment allowed the participants to make decisions about their abilities, resources, and plans. Recommendations and implications for teacher educators as well as inservice and preservice teachers are also presented.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2005.11a
• /
• pp.547-556
• /
• 2005

본 논문에서는 출입국자 관리의 효율성과 제계적인 출입국 관리를 위하여 여권 코드를 자동으로 인식하고 위조 여권을 판별할 수 있는 여권 인식 및 얼굴 인증 방법을 제안한다. 여권 이미지가 기울어진 상태로 스캔되어 획득되어질 경우 개별 코드 인식과 얼굴 인증에 많은 영향을 미칠 수도 있으므로 기울기 보정은 문자 분할 및 인식, 얼굴 인증에 있어 매우 중요하다. 따라서 본 논문에서는 여권 영상을 스미어링한 후, 추출된 문자열 중에서 가장 긴 문자열을 선택하고 이 문자열의 좌측과 우측 부분의 두께 중심을 연결하는 직선과 수평선과의 기울기를 이용하여 여권 영상에 대한 각도 보정을 수행한다. 여권 모드 추출은 소벨 연산자와 수평 스미어링, 8 방향 윤곽선 추적 알고리즘을 적용하여 여권 코드의 문자열 영역을 추출하고, 추출된 여권 코드 문자열 영역에 대해 반복 이지화 방법을 적용하여 코드의 문자열 영역을 이진화한다. 이진화된 문자열 영역에 대해 CDM 마스크를 적용하여 문자열의 코드들을 복원하고 8 방향 윤곽선 추적 알고리즘을 적용하여 개별 코드를 추출한다. 추출된 개별 코드 인식은 개선된 RBF 네트워크를 제안하여 적용한다. 제안된 RBF 네트워크는 퍼지 논리 접속 연산자를 이용하여 경계변수를 통적으로 조정하는 개선된 퍼지 ART 알고리즘을 제안하여 RBF 네트워크의 중간층으로 적용한다. 얼굴 인증을 위해서는 얼굴 인증에 가장 보편적으로 사용되는 PCA 알고리즘을 적용한다. PCA 알고리즘은 고차원의 벡터를 저 차원의 벡터로 감량하여 전체 입력 영상들의 직교적인 공분산행렬을 계산한 후 그것의 고유 값에 따라 각 영상의 고유벡터를 구하므로 PCA 알고리즘을 적용하여 얼굴의 고유 벡터를 구한 후 특징 벡터를 추출한다. 따라서 여권 영상에서 획득되어진 얼굴 영상의 특징벡터와 데이터베이스에 있는 얼굴 영상의 특징벡터와의 거리 값을 계산하여 사진 위조 여부를 판별한다. 제안된 여권 인식 및 얼굴 인증 방법의 성능을 평가를 위하여 원본 여권에서 얼굴 부분을 위조한 여권과 기울어진 여권 영상을 대상으로 실험한 결과, 제안된 방법이 여권의 코드 인식 및 얼굴 인증에 있어서 우수한 성능이 있음을 확인하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.10
• /
• pp.2163-2170
• /
• 2009

We present an automated, energy minimized-based method for Lung parenchyma segmenting Chest Computed Tomography(CT) datasets. Deformable model is used for energy minimized segmentation. Quantitative knowledge including expected volume, shape of Chest CT provides more feature constrain to diagnosis or surgery operation planning. Segmentation subdivides an lung image into its consistent regions or objects. Depends on energy-minimizing, the level detail image of subdivision is carried. Segmentation should stop when the objects or region of interest in an application have been detected. The deformable model that has attracted the most attention to date is popularly known as snakes. Snakes or deformable contour models represent a special case of the general multidimensional deformable model theory. This is used extensively in computer vision and image processing applications, particularly to locate object boundaries, in the mean time a new type of external force for deformable models, called gradient vector flow(GVF) was introduced by Xu. Our proposed algorithm of deformable model is new external energy of GVF for exact segmentation. In this paper, Clinical material for experiments shows better results of proposal algorithm in Lung parenchyma segmentation on Chest CT.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.8
• /
• pp.1861-1868
• /
• 2014

In wireless communication systems, a frequency offset exist at the received signal due to the transmitter-receiver oscillator mismatch and Doppler effect in mobile environments. Those offsets rotate the received signal's phase and degrade the receiver performance. Hence, estimation and compensation of the frequency offset is crucial at the receiver. This paper proposes a new frequency offset estimation technique based on partial correlation. The proposed method requires less computational complexity than that of the conventional method. In addition, since the proposed one can estimate a wide range of frequency offset without estimation accuracy loss, the application of the method is desirable for the communication environments that have a large frequency offset. In order to verify the performance of our proposed scheme, a series of computer simulations have been carried out and compared against those of the conventional method.

• Journal of Navigation and Port Research
• /
• v.44 no.3
• /
• pp.227-234
• /
• 2020

One of the most important operational goals in container terminals is to maximize the quay side productivity by minimizing the turnaround times of the vessels, for which the operations of the quay cranes (QC) to load/unload containers onto/from the vessels should be conducted efficiently without delays. This paper suggests using a policy-based dispatching method for YTs (Yard Tractor) that deliver containers between QCs and the storage yard. The goal of using such a dispatching policy is to maximize the efficiency of the YT operation and accordingly to minimize the QC delays because of late arrivals of the YTs. In particular, in this paper, we modified the previously proposed policy for its application to real container terminal and verified the effect through simulation experiments using real terminal data.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.11
• /
• pp.2155-2161
• /
• 2016

Since Korea is highly dependent on energy imports, it has been making efforts to save energy resources by enacting laws to promote resource saving and recycling. Recently, as a part of recycling of empty bottles, a bottle unattended collecting machine has been installed in the big shopping mall in the metropolitan area. However, there is no commercialization of the unattended collecting machine in Korea and the smart device application for providing information on empty bottle recycling is not yet provided. In this paper, we have designed and constructed a bottle recycling information management system to promote resource recycling. The manager has built a homepage that can manage the information of the empty bottle and the a bottle unattended collecting machine. Also, many people with smart devices can easily access bottle recycling information by using camera and barcode search and label search.