• Korean Chemical Engineering Research
• /
• v.44 no.2
• /
• pp.160-165
• /
• 2006

A Pd-Cu-Ni alloyed hydrogen membrane has fabricated on porous nickel support formed by nickel powder. Porous nickel support made by sintering shows a strong resistance to hydrogen embrittlement and thermal fatigue. Plasma surface modification treatment is introduced as pre-treatment process instead of conventional HCl wet activation. Nickel was electroplated to a thickness of $2{\mu}m$ in order in to fill micropores at the nickel support surface. Palladium and copper were deposited at thicknesses of $4{\mu}m$ and $0.5{\mu}m$, respectively, on the nickel coated support by DC sputtering process. Subsequently, copper reflow at $700^{\circ}C$ was performed for an hour in $H_2$ ambient. And, as a result PdCu-Ni composite membrane has a pinhole-free and extremely dense microstructure, having a good adhesion to the porous nickel support and infinite hydrogen selectivity in $H_2/N_2$ mixtures.

• Applied Chemistry for Engineering
• /
• v.29 no.5
• /
• pp.556-564
• /
• 2018

In this study, polyethylene oxide (PEO)/polyethylene-co-vinyl acetate (EVA)/multi-walled carbon nanotube (MWCNT)-COOH composite membranes were prepared by adding 1, 2, 3, and 5 wt% of MWCNT-COOH to PEO/EVA respectively. The gas permeation properties of $N_2$, $O_2$ and $CO_2$ at $30^{\circ}C$ and 4~8 bar pressure were investigated. In each PEO/EVA/MWCNT-COOH composite membranes, the permeability of $CO_2$ increased with increasing the pressure, but the permeability of $N_2$ and $O_2$ were independent of the feeding pressure. As the MWCNT-COOH content increased, the $CO_2$ permeability increased and then decreased above 2 wt% MWCNT-COOH content. The 2 wt% MWCNT-COOH composite membrane exhibited a $CO_2/N_2$ selectivity of 77.8 and a $CO_2$ permeability of 84 barrer at 8 bar. The high $CO_2/N_2$ selectivity and $CO_2$ permeability were due to the high affinity between the quadrupolar $CO_2$, polar ether groups of PEO, and the polar ester groups of EVA. Additionally, the strong affinity between $CO_2$ and the -COOH groups on the MWCNT surface contributed to the high permeability of $CO_2$.

• Journal of the Korean Electrochemical Society
• /
• v.13 no.2
• /
• pp.81-88
• /
• 2010

Small size polymer electrolyte membrane fuel cell (PEMFC) stacks were prepared using carbon composite and graphite bipolar plates and their performances were evaluated on reactant gas and operating time. In comparison to single cell and stack, it was identified that home-made bipolar plate was well-designed to maximize stack performance as high as that of single cell. During long-term operation, the performances of stacks using two different kinds of bipolar plates were compared. The decrease of performance in both stacks was accelerated with increasing load current. It was observed from stack test that the stack performance using carbon composite bipolar plate was very similar to that using graphite bipolar plate.

• Journal of Periodontal and Implant Science
• /
• v.28 no.2
• /
• pp.219-237
• /
• 1998

Numerous bone graft materials have been used in Periodontics, in an attempt to reach the main goal of periodontal therapy, i.e. the regeneration of periodontal tissue lost due to destructive periodontal diseases. The present study investigates the effect of composite graft of DFDB and Calcium sulfate with and without Calcium sulfate barrier in Periodontal 1-wall intrabony defects in dogs. Following the initiation of general anesthesia by I.V. administration of 40mg/Kg of Pentobabital, second premolar was extracted and full thickness flap elevated. The crown portion of premolars was removed. Exposed root canals were sealed with Caviton and covered completely with flap. After the healing period of 8 weeks, the surgical sites were re-opened and 1-wall intrabony defects were created, and treated with flap operation alone(control group), with composit graft of 80% DFDB and 20% Calcium sulfate(Experimental group 1), with composite graft of DFDB and calcium sulfate with calcium sulfate membrane( Experimental group 2). Healing response was histologically observed after 8 weeks and the results were as follows : 1. New bone formation was 70 % in the control group, 93 % in the Experimental group I, 89 % in the Experimental group II. There was a no differences between Experimental groups. 2. New cementum formation was not significantly different between control and two Experimental groups. 3. The length of connective tissue adhesion was 30 % in the control, 7% in the Experimental group I and 11 % in the Experimental group II. 4. After 8weeks, calcium sulfate was completely resorbed, while DFDB particle remained. These results suggest that the use of composite graft of allogenic DFDB and Calcium sulfate with and without Calcium sulfate barrier in periodontal 1 wall intrabony defects have little effect on connective tissue adhesion, but has beneficial effect on new alveolar bone and new cementum formation, and prevent downgrowth of epithelium and connective tissue effectively.

• Clean Technology
• /
• v.29 no.4
• /
• pp.237-243
• /
• 2023

Aerogel is the most excellent insulation material known to date, but it is inflexible and has very low strength. A blanket containing aerogel in a nonwoven fabric or fiber is currently the most practical form. However, aerogel blankets are not yet widely used because they cannot avoid dust generation when handled, lack flexibility, and can possibly deform. In this study, vacuum treatment, surface treatment, and composite materialization technology were applied to solve this problem, and some prototypes were also made. If an aerogel blanket is wrapped in an aluminum sheet, sealed at the four ends, and vacuumed, it can become a material with better insulation than the blanket itself. An aerogel molded body can be made by coating the aerogel blanket with resin and treating the surface. If the aerogel blanket is multi-packed and laminated with resin or fiber in multiple layers to make it a composite material, it can be used as a flexible insulation material. In particular, this composite material, which utilizes a Teflon membrane with controlled pores, is breathable and waterproof, so it can be used for clothing. Prototypes of insoles for winter boots and outdoor roll mats were also produced using aerogel blanket resin and fiber composites. These prototypes showed low thermal conductivity of less than 20 mW m^-1K^-1, with good flexibility and durability.

• Journal of Microbiology and Biotechnology
• /
• v.27 no.3
• /
• pp.552-560
• /
• 2017

Quorum quenching (QQ) bacteria entrapped in a polymeric composite hydrogel (QQ medium) have been successfully applied in membrane bioreactors (MBRs) for effective biofouling control. However, in order to bring QQ technology closer to practice, the physical strength and lifetime of QQ media should be improved. In this study, enforcement of physical strength, as well as an extension of the lifetime of a previously reported QQ bacteria entrapping hollow cylinder (QQ-HC), was sought by adding a dehydration procedure following the cross-linking of the polymeric hydrogel by inorganic compounds like $Ca^{2+}$ and boric acid. Such prepared medium demonstrated enhanced physical strength possibly through an increased degree of physical cross-linking. As a result, a longer lifetime of QQ-HCs was confirmed, which led to improved biofouling mitigation performance of QQ-HC in an MBR. Furthermore, QQ-HCs stored under dehydrated condition showed higher QQ activity when the storage time lasted more than 90 days owing to enhanced cell viability. In addition, the dormant QQ activity after the dehydration step could be easily restored through reactivation with real wastewater, and the reduced weight of the dehydrated media is expected to make handling and transportation of QQ media highly convenient and economical in practice.

• Applied Chemistry for Engineering
• /
• v.10 no.4
• /
• pp.563-567
• /
• 1999

Reverse osmosis concentration for cephalosproin C was studied using a polyamide composite membrane, FT-30 in spiral wound type with high solute rejection. The experiments were carried out in the aqueous solution of cephalosporin C for water flux, solute rejection and mass transfer coefficient under applied pressure of $4{\sim}20kg/cm^2$, feed concentration of 100~1000 mg/L and feed velocity of 2.8 and 5.6 L/min at room temperature. The effect of operating pressure on the separation of cephalosporin C showed that permeate flux increased with increasing operation pressure. These results are consistent with those predicted by Kedem-Katchalsky model. Solute rejection was nearly 1. The increase of feed concentration caused the reduction of cephalosporin C rejection, which was higher at low concentration than at high concentration, but degree of reduction was small.

• Environmental Engineering Research
• /
• v.23 no.4
• /
• pp.474-484
• /
• 2018

The cleaning efficiency of reverse osmosis (RO) membranes inevitably fouled by organic foulants depends upon both chemical (type of cleaning agent, concentration of cleaning solution) and physical (cleaning time, flowrate, temperature) parameters. In attempting to determine the optimal procedures for chemical cleaning organic-fouled RO membranes, the design of experiments concept was employed to evaluate key factors and to predict the flux recovery rate (FRR) after chemical cleaning. From experimental results and based on the predicted FRR of cleaning obtained using the Central Composite Design of Minitab 17, a modified regression model equation was established to explain the chemical cleaning efficiency; the resultant regression coefficient ($R^2$) and adjusted $R^2$ were 83.95% and 76.82%, respectively. Then, using the optimized conditions of chemical cleaning derived from the response optimizer tool (cleaning with 0.68 wt% disodium ethylenediaminetetraacetic acid for 20 min at $20^{\circ}C$ with a flowrate of 409 mL/min), a flux recovery of 86.6% was expected. Overall, the results obtained by these experiments confirmed that the equation was adequate for predicting the chemical cleaning efficiency with regards to organic membrane fouling.

• Journal of Ginseng Research
• /
• v.46 no.5
• /
• pp.621-627
• /
• 2022

Background: Panax ginseng (ginseng) is a traditional medicine that is reported to have cardioprotective effects; ginsenosides are the major bioactive compounds in the ginseng root. Methods: Magnetic molecularly imprinted polymer (MMIP) nanoparticles might be useful for both the extraction of the targeted (imprinted) molecules, and for the delivery of those molecules to cells. In this work, plant growth regulators were used to enhance the adventitious rooting of ginseng root callus; imprinted polymeric particles were synthesized for the extraction of ginsenoside Rb₁ from root extracts, and then employed for subsequent particle-mediated delivery to cardiomyocytes to mitigate hypoxia/reoxygenation injury. Results: These synthesized composite nanoparticles were first characterized by their specific surface area, adsorption capacity, and magnetization, and then used for the extraction of ginsenoside Rb₁ from a crude extract of ginseng roots. The ginsenoside-loaded MMIPs were then shown to have protective effects on mitochondrial membrane potential and cellular viability for H9c2 cells treated with CoCl₂ to mimic hypoxia injury. The protective effect of the ginsenosides was assessed by staining with JC-1 dye to monitor the mitochondrial membrane potential. Conclusion: MMIPs can play a dual role in both the extraction and cellular delivery of therapeutic ginsenosides.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.11a
• /
• pp.399-402
• /
• 2006

현재까지 연료전지 전해질 막으로는 Nafion으로 잘 알려져 있는 perfluorosulfonic acid(PFSA)막이 주를 이루고 있다. 이 막들은 $80^{\circ}C$ 이하의 낮은 온도의 연료전지에서 가장 좋은 성능을 보인다. PFSA 막들은 탄소-불소로 이루어진 사슬의 특성상 산화, 환원의 조건에서도 뛰어난 안정성을 보이며 이온 전도도가 0.1S/cm 이상으로 기존에 알려진 전해질 막들 중 가장 우수한 성능을 나타낸다. 하지만 연료전지의 작동온도가 $100^{\circ}C$ 이상의 높은 온도에서 는 막에 존재하던 수분이 제거되면서 수소이온 전도도가 떨어지며 기계적 물성도 떨어지는 문제점을나타낸다. $100^{\circ}C$ 이상의 온도에서 연료전지를 작동시키면 양쪽의 전극에서 일어나는 촉매반응의 속도가 향상되며, 물의 끓는점 이상에서 작동되므로, 전지 내에서 다양한 상을 고려하지 않고 기화된 물만을 고려하여 설계를 할 수가 있다. 따라서 최근 이러한 고온/저가습 운전을 위 한 전해질 막의 개발을 위해 기존의 Nafion 막에 전도성 무기 입자를 도입하는 연구들이 활발히 진행되고 있다. 본 연구에서는 전도성 무기 입자로서 $ZrO_2$나노입자를 합성하고, 이를 상용 10 wt.% Nafion 용액에 분산하여 solution casting 방법을 통해 $61{\mu}m$ 두께의 유기-무기 복합막을 제조하였다. 제조한 유기-무기 복합막의 성능 평가를 위하여 함수율, 이온 전도도, 당량무게 및 단위 전지를 이용한 전류-전압 곡선을 측정하여 상용 Nafion 112 막과 비교해 보았다. $ZrO_2$ 입자는 전도성이며 동시에 친수성을 나타내기 때문에 상용 막에 비하여 함수율 및 수소이온 전도도가 우수하게 나타났다. 복합막의 이러한 물성은 $100^{\circ}C$이상의 고온에서 전해질 막 내의 물 관리를 용이하게 한다. 단위 전지 운전 온도 $130^{\circ}C$, 상대습도 37%의 운전 조건에서도 상당히 우수한 전지 성능을 보임에 따라 고온/저가습 조건에서 상용 Nafion 112 막보다 우수한 막 특성을 나타냄을 확인하였다.