References
- E. Cho and I.-H. Oh, ‘Current R&D issues on bipolar plates of PEMFC’, Polym. Sci. Tech, 15, 612 (2004).
- V. Metha and J.S. Cooper, ‘Review and analysis of PEM fuel cell design and manufacturing’, J. Power Sources, 114, 32 (2003). https://doi.org/10.1016/S0378-7753(02)00542-6
- I. Bar-On, R. Kirchain, and R. Roth, ‘Technical cost analysis for PEM fuel cells', J. Power Sources, 109, 71 (2002). https://doi.org/10.1016/S0378-7753(02)00062-9
- T.-H. Yang, “Preparation and Commercialization of Bipolar Plate”, Seminar, Fuel Cell Core Technology Center, 2006.
- Y.-M. Koo, “Preparation and Evaluation of Fuel Cell Bipolar Plate”, Seminar, Fuel Cell Core Technology Center, 2009.
- E.A. Cho, U.-S. Jeon, H.Y. Ha, S.-A. Hong, and I.-H. Oh, ‘Characteristics of composite bipolar plates for polymer electrolyte membrane fuel cells’, J. Power Sources, 125, 178 (2004). https://doi.org/10.1016/j.jpowsour.2003.08.039
- S.I. Heo, K.-S. Oh, J.-H. Jang, Y.-C. Yang, and K.-S. Han, 'A study on precuring condition of the 2-step manufacturing method for PEMFC composite bipolar plates', J. Kor. Soc. Comp. Mater., 20, 10 (2007).
- U.-S. Jeon, E.A. Cho, H.-Y. Ha, S.-A. Hong, and I.-H. Oh, ‘Development of composite bipolar plates for PEM fuel cells’, Fuel Cell Symp. p283, July, 2003, Korea.
- H. Kang, I. Han, and C. Lim, 'Development of composite bipolar plate for PEMFC', J. Kor. Soc. New & Renew. Energy, 3, 3 (2007).
- H.-S. Lee, S.-H. Ahn, U.-S. Jeon, S.-Y. Ahn, and B.-K. Ahn, 'Evaluation of mechanical and electrical properties of bipolar plate made of fiber-reinforced composites for PEM fuel cell', Trans. KSAE, 14, 39 (2006).
- K.-J. Kim, Y. Yun, and Y. Jeon, 'The effect of contact resistance and electric conductivity on PEMFC performance', Proc. Kor. Soc. New & Renew. Energy, p133 (2007).
- H.-J. Hwang, T.-H. Yang, Y.-G. Yoon, W.-Y. Lee, Y.-G. Shul, and C.-S. Kim, 'The performance evaluation of the separator for PEMFCs', Proc. Kor. Soc. New & Renew. Energy, p288 (2005).
- W. Choi, Y. Kim, S. Yu, Y. Lee, D. Hong, and K. Ahn, ‘An Experimental Study of Short Stack on the Performance of the Proton Exchange Membrane Fuel Cell for the Residential Power generation’, Proc. Kor. Soc. New & Renew. Energy, p21 (2008).
- Y. Hong, J. Oh, H. Oh, and H. Kim, ‘Investigation of Fuel Cell Catalyst Degradation using Electrochemical analysis’, Proc. Kor. Soc. New & Renew. Energy, p208 (2007).
- J.-W. Lee, J.-D. Kim, and D.-R. Park, ‘Characteristics of 5 kW class proton-exchange-membrane fuel cell (PEMFC) stack according to the long-term operation’, J. Kor. Ins. Gas, 11, 40 (2007).