• ETRI Journal
• /
• 제33권4호
• /
• pp.637-640
• /
• 2011

A novel bumping material, which is composed of a resin and Sn3Ag0.5Cu (SAC305) solder power, has been developed for the maskless solder-on-pad technology of the fine-pitch flip-chip bonding. The functions of the resin are carrying solder powder and deoxidizing the oxide layer on the solder power for the bumping on the pad on the substrate. At the same time, it was designed to have minimal chemical reactions within the resin so that the cleaning process after the bumping on the pad can be achieved. With this material, the solder bump array was successfully formed with pitch of 150 ${\mu}m$ in one direction.

• ETRI Journal
• /
• 제33권6호
• /
• pp.969-972
• /
• 2011

This letter presents a CMOS RF front-end operating in a subthreshold region for low-power Band-III mobile TV applications. The performance and feasibility of the RF front-end are verified by integrating with a low-IF RF tuner fabricated in a 0.13-${\mu}m$ CMOS technology. The RF front-end achieves the measured noise figure of 4.4 dB and a wide gain control range of 68.7 dB with a maximum gain of 54.7 dB. The power consumption of the RF front-end is 13.8 mW from a 1.2 V supply.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제30권3_4호
• /
• pp.185-201
• /
• 2003

다양한 도메인의 요구사항을 만족시켜 주기 위한 비즈니스 컴포넌트(Business Component)는 다양성을 제공할 수 있도록 개발되어야 한다. 그러나 컴포넌트 개발 시에 다양한 요구사항을 분석하여 개발되더라도 컴포넌트가 이용될 때 예상하지 못한 요구 사항들이 발생하기 때문에 요구 사항들을 완전하게 만족시켜 주기 위한 컴포넌트의 개발은 쉽지 않다. 이와 같은 이유 때문에 컴포넌트가 블랙 박스가 아닌 화이트 박스로 제공되므로 컴포넌트를 인터페이스에 의해 변경하는 것이 아니라 직접 코드를 변경하는 문제가 발생한다. 따라서 컴포넌트를 이용한 Time-To-Market을 이루기가 쉽지 않으며 컴포넌트의 재사용성도 떨어진다. 본 논문에서는 컴포넌트의 변경 가능한 부분을 분석하여 다양한 요구 사항을 만족시킬 수 있는 커스터마이제이션 기법을 제안한다. 컴포넌트의 초기 가변성은 컴포넌트 개발(CD : Component Development) 과정에서 설계되며 가변성 적용을 위해 커스터마이제이션 기법을 이용한다. 가변성이 적용된 컴포넌트를 이용하여 어플리케이션을 개발하는 과정에서 가변성이 재 설계될 수 있으며 이러한 과정을 통해 컴포넌트의 가변성은 진화하고 컴포넌트의 일반성은 향상될 수 있다. 본 논문에서 제시하는 커스터마이제이션 기법은 컴포넌트가 재 설계될 때 기존 컴포넌트는 전혀 변경하지 않고 확장하여 컴포넌트를 변경 할 수 있다.

• 정보처리학회논문지D
• /
• 제13D권7호
• /
• pp.947-958
• /
• 2006

컴포넌트 확장성 및 재사용성을 향상시키기 위해서는 분석단계에서부터 가변적인 것들을 규칙기반으로 분석해서 컴포넌트로 식별할 필요가 있다. 본 논문에서는 시스템 외부 이벤트에 대해 트랜잭션 처리를 규칙기반으로 처리해야 하는 도메인 상에서 객체 기반의 중요 개념을 규칙기반으로 효과적으로 추출해 UML Components 개발 프로세스 상에서 가변적인 컴포넌트를 개발할 수 있는 규칙 기반 분석 패턴을 제시한다. 업무 지식이나 경험이 다른 많은 분석가들이 서브 시스템 많은 규칙 기반의 가변적인 복잡한 비즈니스 업무 분석 시 제안한 분석 패턴을 사용할 경우 분석 산출물의 일관성이나 가독성을 좋게 하며 또한 UML Components 방법론상에서 효과적으로 가변적인 비즈니스 컴포넌트들을 식별할 수 있다. 이러한 분석 패턴의 타당성을 증명하기 위해 본 논문에서는 가변적인 규칙기반으로 업무를 처리하는 은행 수신과 수출입 업무 도메인에 적용한 결과 패턴에서 제시한 중요 개념을 기반으로 거의 유사한 비즈니스 개념 모델을 도출할 수 있었으며 또한 이들 중요 개념을 기반으로 UML Components 개발 프로세스 상에서 가변적인 비즈니스 컴포넌트를 효과적으로 식별할 수 있었다.

• Journal of Microbiology and Biotechnology
• /
• 제6권4호
• /
• pp.278-285
• /
• 1996

We identified volatile components of traditional Korean soy sauce and soybean paste which had been manufactured with the same traditional Meju with a view to improving the quality of traditional Korean soy sauce and soybean paste. All of the volatile components were extracted by simultaneous steam distillation-extraction (SDE) apparatus. To obtain more detailed information, whole volatile components were separated into fractions. The volatile components of the whole and of each fraction were identified by GC-mass and Kovat's retention index. Sixty two and eighty six components were identified in traditional Korean soy sauce and soybean paste, respectively. Many aroma components of traditional Korean soy sauce differ from those of traditional Korean soybean paste. It was confirmed that many aroma components of traditional Korean soy sauce and soybean paste are completely different from those of Japanese fermented soy sauce (Shoyu) and soybean paste (Miso).

• 한국환경보건학회지
• /
• 제22권2호
• /
• pp.124-129
• /
• 1996

In order to investigate the deposition chara.cteristics of water-soluble ionic components in dustfall in Kwangju city, dustfall samples were collected by deposit jar for one year from December 1992 to November 1993. The depositjon amount of dustfall and water-soluble ionic components ($SO_4^{2-}, NO_3^-, Cl^-, NH_4^+, Na^+, Ca^{2+}, Mg^{2+}, K^+$) were measured. The total deposition amount of dustfall was 10.0 ton/$km^2$/month and showed seasonal trend of Summer and Spring > Fall and Winter. The total deposition amounts of water-soluble components showed 2.41 ton/$km^2$/month and seasonal trend of Summer > Fall > Spring > Winter. Deposition amount of $SO_4^{2-}$ was 0.99 ton/$km^2$/month which makes up 41% of water-soluble components. The deposition amounts of dustfall and watersoluble components according to the sampling points were approximately similar to each other. From this result, it can be estimated that the deposition amounts of dustfall and water-soluble components in dustfall were more influenced by the seasonal variation than the regional emission characteristics of pollution source. The content of each ionic component to the deposition amount of water-soluble components showed in order of $SO_4^{2-} > Cl^- > NH_4^+ > Na^+ > Ca^{2+} = K^+ > NO_3^- > Mg^{2+}$ respectively.

• ETRI Journal
• /
• 제39권1호
• /
• pp.62-68
• /
• 2017

In this paper, we present the design and characterization analysis of a cascode GaN field-effect transistor (FET) for switching power conversion systems. To enable normally-off operation, a cascode GaN FET employs a low breakdown voltage (BV) enhancement-mode Si metal-oxide-semiconductor FET and a high-BV depletion-mode (D-mode) GaN FET. This paper demonstrates a normally-on D-mode GaN FET with high power density and high switching frequency, and presents a theoretical analysis of a hybrid cascode GaN FET design. A TO-254 packaged FET provides a drain current of 6.04 A at a drain voltage of 2 V, a BV of 520 V at a drain leakage current of $250{\mu}A$, and an on-resistance of $331m{\Omega}$. Finally, a boost converter is used to evaluate the performance of the cascode GaN FET in power conversion applications.

• 한국연초학회지
• /
• 제23권2호
• /
• pp.179-184
• /
• 2001

This study was conducted to determine the smoke component distribution and the relationship between chemical components and physical characteristics of cigarettes. 16 different cigarette brands which were sold in the market were selected for this study. Five kinds of smoke components which have been tar, nicotine, water, carbon monoxide(CO) puff No., and six kinds of physical characteristics which were filter type, leaf weight, filter weight, UPD, EPD, dilution rate were analyzed. The average values in tar, nicotine, water, CO concentration were 6.5 mg/cig. 0.66 mg/cig, 1.12 mg/cig. and 6.32 mg/cig., respectively. The average ratios of nicotine/tar and CO/tar were 0.10, and 1.02 respectively. The distribution of smoke components collected in the cambridge filter and cigarette filter was different. The averages of tar and nicotine removal efficiency by a cigarette filter were 53%, and 48%, respectively. All smoking components were positively correlated with other smoking components. filter types, EPD, and dilution rate were showed high correlation to the changes of smoke components. Especially, dilution rate of cigarette strongly affected on the changes of all smoke components.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.464-467
• /
• 2005

In this paper, we present techniques to manufacture color electronic ink for multi-color electrophoretic display implementation. The charged color pigments have been prepared to have superior affinity for dielectric fluid. White $TiO_2$ nanoparticles were modified with poly(methyl methacrylate) copolymer for a microencapsulated electrophoretic display system, in order to reduce the density mismatch between nanoparticles and dielectric medium. These color balls and white pigment particle suspensions were microencapsulated through the typical microencapsulation technique. We fabricate the microcapsules to the single layer on flexible ITO substrate to test the multi-color electrophoretic display application.

• ETRI Journal
• /
• 제31권6호
• /
• pp.653-659
• /
• 2009

We have investigated the channel protection layer (PL) effect on the performance of an oxide thin film transistor (TFT) with a staggered top gate ZnO TFT and Al-doped zinc tin oxide (AZTO) TFT. Deposition of an ultra-thin PL on oxide semiconductor films enables TFTs to behave well by protecting the channel from a photo-resist (PR) stripper which removes the depleted surface of the active layer and increases the carrier amount in the channel. In addition, adopting a PL prevents channel contamination from the organic PR and results in high mobility and small subthreshold swings. The PL process plays a critical role in the performance of oxide TFTs. When a plasma process is introduced on the surface of an active layer during the PL process, and as the plasma power is increased, the TFT characteristics degrade, resulting in lower mobility and higher threshold voltage. Therefore, it is very important to form an interface using a minimized plasma process.