• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.9
• /
• pp.868-882
• /
• 2009

In this paper, channel model and wireless link performance analysis for the short-range wireless communication system applications in the terahertz frequency which is currently interested in many countries will be described. In order to realize high data rates above 10 Gbps, the more wide bandwidths will be required than the currently available bandwidths of millimeter-wave frequencies, therefore, the carrier frequencies will be pushed to THz range to obtain larger bandwidths. From the THz atmospheric propagation characteristics based on ITU-R P.676-7, the available bandwidths were calculated to be 68, 48 and 45 GHz at the center frequencies of 220, 300 and 350 GHz, respectively. With these larger bandwidths, it was shown from the simulation that higher data rate above 10 Gbps can be achieved using lower order modulation schemes which have spectral efficiency of below 1. The indoor propagation delay spread characteristics were analyzed using a simplified PDP model with respect to building materials. The RMS delay spread was calculated to be 9.23 ns in a room size of $6\;m(L){\times}5\;m(W){\times}2.5\;m(H)$ for the concrete plaster with TE polarization, which is a similar result of below 10 ns from the Ray-Tracing simulation in the reference paper. The indoor wireless link performance analysis results showed that receiver sensitivity was $-56{\sim}-46\;dBm$ over bandwidth of $5{\sim}50\;GHz$ and antenna gain was calculated to be $26.6{\sim}31.6\;dBi$ at link distance of 10m under the BPSK modulation scheme. The maximum achievable data rates were estimated to be 30, 16 and 12 Gbps at the carrier frequencies of 220, 300 and 350 GHz, respectively, under the A WGN and LOS conditions, where it was assumed that the output power of the transmitter is -15 dBm and link distance of 1 m with BER of $10^{-12}$. If the output power of transmitter is increased, the more higher data rate can be achieved than the above results.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.6
• /
• pp.799-806
• /
• 2018

In this paper, we analyzed the communication distances in the flat and spherical earth model using the main specifications of the wireless communication device under development to be installed in the unmanned surface vehicle(USV). We installed the wireless communication device on the test ship and the actual communication test was performed in the South Sea of Korea, it compared the experimental result with the simulated results. If the installation altitude of the transmitting and receiving antennas is low, there is not the big difference between the two models. However, when the altitude of one of the two antennas is high, the spherical earth model has similar results to the experimental data. As the altitude of the antenna installation increases, fading occurs in a certain section. We expect that this fading can be overcome through antenna technologies such as space diversity.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.202-204
• /
• 2021

The Internet of Things (IoT) is a term first used by Kevin Ashton, director of MIT's Auto ID Center, in 1999, and refers to the connection of things to the Internet. Bluetooth, one of the wireless networks, is a technology developed as an industry standard for personal short-range wireless communication first developed by Ericsson in 1994. Since the Raspberry Pi has Bluetooth built-in, a wireless network is possible. This paper implements a module for the Internet of Things by implementing serial communication in the Bluetooth built-in Raspberry Pi 3 B+. There was a problem that Bluetooth communication was impossible between raspberries, so the discovery function was activated and serial communication was added to successfully link the communication.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.13 no.2
• /
• pp.13-25
• /
• 2017

Recently, the high performance of tactical situation display console and tactical data links are used to integrate the operational situations in accordance with information age and NCW (Network Centric Warfare). The tendency to maximize the efficiency of task execution has been developed by sharing information and the state of the battle quickly through complex and diverse information exchange. Tactical data link is a communication system that shares the platform with core components of weapons systems and battlefield situation between the command and control systems to perform a Network Centric Warfare and provides a wide range of tactical data required for decision-making and implementation.It provides the tactical information such as tactical information such as operational information, the identification of the peer, and the target location in real time or near real time in the battlefield situation, and it is operated for the exchange of mass tactical information between the intellectuals by providing common situation recognition and cooperation with joint operations. In this study, still image management, audio file management, tactical screen recording and playback using the storage and playback, NITF (National Imagery Transmission Format) message received from the displayer integrates the tactical situation in three dimensions according to multiple data link operation to suggest ways to ensure data integrity between the data link processor during the entire operation time.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.6
• /
• pp.13-22
• /
• 2009

Recently, DSRC technology is used in the various fields such as parking system, BIS, ETC, etc. This paper suggests a traffic information system using this DSRC technology. The traffic information processing based on point detection using existing vehicle detection equipment is the system in which a collection and a service are operated separately while the traffic information system based on the link detection using DSRC is able to collect and provide the traffic information through the communication between RSE and OBU. The speed of a traffic congestion is high on the process converted from a point passing speed to a link average speed because the vehicle detection equipment makes the link traffic information into the point information. When the condition of traffic is deteriorated, traffic speed of the vehicle detection equipment becomes higher than DSRC. Especially, in this system, deflection by data of the traffic speed of the traffic information system is much decreased, and the unexpected condition detection and traffic condition are provided promptly.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.1
• /
• pp.211-220
• /
• 2018

The standard data link layer encryption provided by CCSDS has a structure that encodes HDLC frame into it using an AES algorithm. However, CCSDS is standard method has a structure in which the receiving side cannot request a re-activation when noise interference occurs over an unstable channel. SES Alarmed has a structure that enables the receiving side to additionally detect errors and perform re-activation requests in an operational structure similar to that of link encryption in CCSDS. The SES Alarmed related paper was intended to identify the optimum range of thresholds and identify data corruption due to channel noise. In this paper, the focus was on reducing the re-activation process if the HDLC frame, excluding the password Sync code, consistently exceeds any threshold levels. The HDLC frame order was changed and the results of using SES Alarmed were proposed and compared.

• Journal of Advanced Navigation Technology
• /
• v.4 no.2
• /
• pp.171-181
• /
• 2000

In this paper, we propose an AVLS(Automatic Vehicle Location System) using the DSRC(Dedicated Short Range Communication) which adopts a radio communication tool between RSE(Road-Side Equipment) and OBE(On-Board Equipment) on a vehicle and uses the ISM bandwidth of 5.8GHz radio frequency. Typical AVLS uses the sensors for detecting the vehicle, but the DSRC system is developed for supporting various services such as the position of vehicle, clearance, vehicle to vehicle communication, collection and distributions of traffic and road information. Also, for fast processing, we design three-layer configuration of physical(L1), data link(L2), and application layer(L7), which simplifies the seven-layer configuration. We suggest the proposed system as a new technology for replacement of typical wireless communication system and sensors for AVLS.

• The Journal of Korea Robotics Society
• /
• v.6 no.2
• /
• pp.97-107
• /
• 2011

This paper describes efficient flight control algorithms for building a reconfigurable ad-hoc wireless sensor networks between nodes on the ground and airborne nodes mounted on autonomous vehicles to increase the operational range of an aerial robot or the communication connectivity. Two autonomous flight control algorithms based on adaptive gradient climbing approach are developed to steer the aerial vehicles to reach optimal locations for the maximum communication throughputs in the airborne sensor networks. The first autonomous vehicle control algorithm is presented for seeking the source of a scalar signal by directly using the extremum-seeking based forward surge control approach with no position information of the aerial vehicle. The second flight control algorithm is developed with the angular rate command by integrating an adaptive gradient climbing technique which uses an on-line gradient estimator to identify the derivative of a performance cost function. They incorporate the network performance into the feedback path to mitigate interference and noise. A communication propagation model is used to predict the link quality of the communication connectivity between distributed nodes. Simulation study is conducted to evaluate the effectiveness of the proposed reconfigurable airborne wireless networking control algorithms.

• Journal of Korea Multimedia Society
• /
• v.18 no.8
• /
• pp.909-914
• /
• 2015

In wireless sensor networks, sensor nodes have a short transmission range and data is transferred from source to destination node using the multi-hop transmission. Sensor nodes are powered by battery and the link qualities are different, and the routing protocol in the wireless sensor network is one of the important technical issues. Multipath routing was proposed to reduce the data congestion and increase data throughput. In the multipath routing, however, each path can be interfered by the other path, and it can aggravate network performance. In this paper, we propose the multipath routing scheme for multi-rate wireless sensor networks. The multipath routing selects transmission paths to minimize transmission delay and path interference.

• Journal of Communications and Networks
• /
• v.16 no.3
• /
• pp.293-300
• /
• 2014

As energy harvesting communication systems emerge, there is a need for transmission schemes that dynamically adapt to the energy harvesting process. In this paper, after exhibiting a finite-horizon online throughput-maximizing scheduling problem formulation and the structure of its optimal solution within a dynamic programming formulation, a low complexity online scheduling policy is proposed. The policy exploits the existence of thresholds for choosing rate and power levels as a function of stored energy, harvest state and time until the end of the horizon. The policy, which is based on computing an expected threshold, performs close to optimal on a wide range of example energy harvest patterns. Moreover, it achieves higher throughput values for a given delay, than throughput-optimal online policies developed based on infinite-horizon formulations in recent literature. The solution is extended to include ergodic time-varying (fading) channels, and a corresponding low complexity policy is proposed and evaluated for this case as well.