• 대한전자공학회논문지SD
• /
• 제40권6호
• /
• pp.384-392
• /
• 2003

집적회로용 NPN BJT의 베이스-컬렉터간 역방향 항복전압 추출 알고리즘을 제시한다. 모의실험 시간을 최소화할 수 있는 3차원 메쉬 생성 방법을 제시하고 포아송 방정식의 해를 이용하여 역방향 항복전압을 구하는 방법을 제시한다. 제시된 방법의 타당성을 검증하기 위해 20V 공정과 30V 공정을 기반으로 제작된 집적회로용 NPN BJT의 베이스-컬렉터간 역방향 항복전압을 실측치와 비교한 결과 20V 공정을 이용한 NPN BJT는 8.0%의 평균상대오차를 보였으며 30V 공정을 이용한 NPN BJT는 4.3%의 평균 상대오차를 보였다.

• KIEAE Journal
• /
• 제16권6호
• /
• pp.167-172
• /
• 2016

Purpose: The solar water heater with natural circulation has been used for several decades in the world as it is automatically operated without a pump and controller and is easy to maintain and repair. After the subsidy was offered from 2012, the solar water heater with natural circulation is becoming increasingly popular in Korea. Recently, the development of a wall-integrated solar water heater, which improves the applicability of buildings and prevents the overheating in the summer, is being developed. On the other hand, the design and performance evaluation data of solar water heaters are very inadequate, and analysis of heat and flow is required to develop a new type of solar water heater. Method: Therefore, in this study, we proposed a new simplified system analysis model that reflects heat and pressure loss from the test results of KS B ISO 9806-1 (Solar collector test method), assuming that the collector is a simple pipe system, the validity of which was verified through experiments. Result: As a result, first, the RMSE of the system circulation flow rate and the average temperature of the inlet and outlet of the collector according to the experimental results and the simulation are 0.05563 and 0.88530, respectively, which are very consistent. Secondly, the mass flow rate is increased linearly with the increase of the solar radiation, and the mass flow rate is 0.0104 ~ 0.0180kg/s in the range of $200{\sim}380W/m^2$ of solar irradiance. Compared with the test flow rate 0.0764kg / s of the test collector, it showed a level of less than 20%.

• 융합정보논문지
• /
• 제11권1호
• /
• pp.109-117
• /
• 2021

본 논문에서는 해양자동채염기의 구조중량 최소화를 위해 구조설계에 대한 메타모델 기반 근사최적화를 수행하였다. 구조해석은 해양자동채염기의 초기설계에 대한 강도성능을 평가하기 위해 유한요소법을 이용하여 수행하였다. 구조해석에서는 설계하중조건에 대한 강도성능을 평가하였다. 최적설계문제는 강도성능 제한조건을 만족하면서 중량을 최소화할 수 있는 구조두께의 설계변수를 결정하도록 정식화하였다. 근사최적화에는 반응표면법, 크리깅 모델 및 체비쇼프 직교 다항식의 메타모델을 사용하였다. 수치계산 특성을 검토하기 위해 근사최적화 결과는 비근사최적화 결과와 비교하였다. 근사최적화에 사용된 메타모델 중 체비쇼프 직교 다항식이 해양자동채염기의 구조설계에 가장 적합한 최적설계 결과를 나타내었다.

• 자원리싸이클링
• /
• 제2권2호
• /
• pp.1-8
• /
• 1993

부선법에 의하여 폐수속에 함유되어 있는 철이온을 제거하기 위한 몇가지 효과적인 포수제와 최적 조건들을 알아본 실험의 결과를 요약하면 다음과 같다. 음이온 포수제인 sodium lauryl sulfate에 의해서 2가와 3가 철은 각각 pH 7과 6에서 효과적으로 제거되었다. 음이온 호수제인 aeropromotor 845에 의해서 2가와 3가철은 모두 pH pH 10~11영역에서, 3가철은 pH4~10영역에서 효과적으로 제거되었따. 따라서, 2가와 3가철은 2가와 3가 철이온침전점 이상으로 단순히 용액의 pH값을 조절하여 수산화철 침전으로 만든 다음 부선법에 의하여 효과적으로 제거된다고 할 수 있다. 그때의 효과적은 pH 조절제는 NaOH와 $Na_2CO_3$였고, 효과적인 포수제는 aeropromotor 845와 trimetyl dodecyl ammomum chloride 이었다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제25권2호
• /
• pp.1-8
• /
• 2020

In general, the estimation of optimum yield for the radial collector well is determined by the empirical equation or numerical modeling, in which hydraulic conductivity of the aquifer is a main influence factor. Hydraulic conductivities of 164 soil samples collected from boreholes and horizontal wells (average length: about 50 m) installed during well construction in the Anseong stream were drawn in two-dimensional map by the Kriging method and utilized in this study. Hydraulic conductivity analyses by Representative Elementary Count (REC) indicated the average hydraulic conductivity is similar to that of the pumping test when the number of samples reaches about 1,000, which correspond to 1,000 ㎡. Pumping test was also conducted at 1 pumping well and 13 observation wells to estimate hydraulic conductivities at each observation well. REC analysis indicated that the average value of hydraulic conductivity calculated from at least four observation wells is valid as a representative value. The overall result suggested that multiple observation wells or multiple pumping-observation well systems that are located within the range of horizontal wells should be utilized to properly estimate the representative hydraulic conductivity values and the yield of a radial collector well.

• 정보처리학회논문지C
• /
• 제12C권1호
• /
• pp.11-18
• /
• 2005

본 논문에서는 기가비트 트래픽에서도 높은 패킷 헤더 수집률(packet header collection ratio)을 보이는 멀티프로세서(multi-processor), 멀티쓰레드(multi-thread)를 채용한 네트워크 프로세서 기반의 패킷 헤더 수집기를 제안한다. 제안 패킷 수집기는 기가비트 트래픽 패킷 헤더를 분리하여 여러 대의 100Mbps MAC 포트로 분산하여 전달할 수 있는 구조를 가지고 있다. 제안된 구조는 고속 트래픽 처리를 위해 독창적인 버퍼관리 기법과 프로세서간 부하 분산 기법을 사용하고 있으며, 풍부한 실험을 퐁해 그 성능을 검증하였다.

• 한국해양공학회지
• /
• 제34권4호
• /
• pp.253-262
• /
• 2020

This study provides a comparative analysis of experiments-based enhancements and sensitivity evaluations for the structural design of an automatic ocean salt collector under various load conditions. The sizing variables of the structural members were considered as design factors. The strength and weight performances were selected as output responses. The design of experiments used in the comparative study consisted of the orthogonal array design, Box-Behnken design, and central composite design. The response surface model, one of the metamodels, was applied to the approximate model generation. The design enhancement performance metrics, including numerical costs and weight minimization, according to the design of experiments, were compared from the best design case results. The central composite design method showed the most enhanced design results for the structural design of the automatic ocean salt collector.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.316-321
• /
• 2000

In this study, heat collecting performance was study of flat plate solar collector by the angle. A method of study on were made turn out artificial sun by the angle of 0, 15, 30 degrees. The heat performances were measured the tube array surface temperature by thermo-couple. The winter season natural condition for 4 times on the angles of various general and emboss glass at optimum distance(0.68m) calculated of between sun and solar collector. To sum up temperature rise is appear more or less that emboss glass is all the better for general glass. The temperature variable at below of 30 degree was appear very less. The maximum performance of this system at that it is tilt angle of 30 with general glass is appear Q:11.54(kcal/min) and ${\Delta}T=18.9^{\circ}C$.

• 전자공학회논문지A
• /
• 제31A권8호
• /
• pp.46-52
• /
• 1994

DC and AC current crowding effects for microwave and high speed bipolar transistors are investigated in detail using a new and accurate measurement technique based on Z-parameter equationa. Using the new measurement technique dc and ac current crowding effects have been explained clearly in bipolar junction transistors. To model ac crowding effects a capacitive element defined as base capacitance (C$_b$), called ac crowding capacitance is added to base resistance in parallel thereby treating the base resistance(R$_b$) as base impedance Z$_b$. It is shown that base resistance decreases with increasing collector current due to dc current crowding and approaches to a certain limited value at high collector current due to current crowding and approaches to a certain limited value at high collector currents regardless of the emitter size. It is also observed that due to ac current crowding base capacitance increases with increasing collector current. To quantigy the ac crowding effects for SPICE circuit simulation the base capacitance(C$_b$) including the base depletion and diffusion components has been modeled with an analytical expression form.

• 설비공학논문집
• /
• 제28권9호
• /
• pp.361-366
• /
• 2016

As an alternative of well-mixed storage tank with lower coil only, we have proposed a tank with lower and upper coils and verified a superior thermal stratification in a tank, which results in increased collector efficiency and solar fraction. But the phenomenon of temperature reversal was often experimentally observed in the tank, so a revised control was successfully applied which is to heat only lower coil using three way valve if temperature reversal occurs and to operate the collector with low flow rate when the condition of solar radiation is not good. In the present study, using TRNSYS we compared the existing lower heating and the proposed lower and upper heating with a control preventing temperature reversal. The results showed that the proposed method has an increase of collector efficiency by 5.1% and solar fraction by 3.2%.