• 한국포장학회지
• /
• 제15권3호
• /
• pp.99-104
• /
• 2009

Soy protein isolate (SPI)-based nanocomposite films with three different types of nanoclays, such as Cloisite $Na^+$, Cloisite 20A, and Cloisite 30B, were prepared using a solution casting method, and their optical, tensile, and water vapor barrier properties were determined to investigate the effect of nano-clay type on film properties. Among the tested nanoclays, Cloisite $Na^+$, a hydrophilic montmorillonite (MMT), exhibited the highest transparency with least opaqueness, the highest tensile strength, and the highest water vapor barrier properties, indicating Cloisite $Na^+$ is the most compatible with SPI polymer matrix to form nanocomposite films. The film properties of SPI/Cloisite $Na^+$ nanocomposite films were strongly dependent on the concentration of the clay. Film properties such as optical, tensile, and water vapor barrier properties improved significantly (p<0.05) as the concentration of clay increased. However, the effectiveness of addition of the clay reduced above a certain level (i.e., 5wt%), indicating that there is an optimum amount of clay addition to exploit the full advantage of nanocmposite films.

• Food Science and Biotechnology
• /
• 제15권6호
• /
• pp.925-930
• /
• 2006

Chitosan-based nanocomposite films were prepared using a solution intercalation method incorporating varying amounts of organically modified montmorillonite (Cloisite 30B) from 0 to 30 wt%. The nanocomposite films prepared were optically clear despite a slight decrease in the transmittance due to the spatial distribution of nanoclay. X-ray diffraction patterns indicated that a certain degree of intercalation or exfoliation formed when the amount of clay in the film was low and that microscale tactoids formed when the clay content in the sample was high (more than 10 wt%). The tensile strength (TS) of the chitosan film increased when the clay was incorporated up to 10 wt% and then decreased with further increases in the clay content of the film. The elongation at break (E) increased slightly upon the addition of low levels of clay up to 5 wt% and then decreased with further increases in the amount of the clay in the film. The water vapor permeability (WVP) decreased exponentially with increasing clay content. The water solubility (WS) and swelling ratio (SR) of the nanocomposite films decreased slightly, indicating that the water resistance of the chitosan film increased due to the incorporation of the nanoclay.

• Nuclear Engineering and Technology
• /
• 제51권4호
• /
• pp.1047-1059
• /
• 2019

This work describes the development of a numerical module with a multiphysics structure to simulate the thermo-hydro-chemo-mechanical behavior of compacted bentonites. First, the conceptual model, based on the state-of-the-art formulation for clay-based engineered barriers in deep geological repositories, is described. Second, the advantages of multiphysics-based modules are highlighted. Then, the guidelines to develop a code using such tools are outlined, presenting an example of implementation. Finally, the simulation of three tests that illustrate the behavior of compacted bentonites assesses the scope of the developed code. The satisfactory results obtained, and the relative simplicity of implementation, show the opportunity of the modeling strategy proposed.

• Membrane and Water Treatment
• /
• 제6권5호
• /
• pp.393-409
• /
• 2015

Zinc and lead pollution are public environmental issues that have attracted lots of attention for a long time. Landfill leachate contains heavy metals, such as Zn(II) and Pb(II), which are usually related to the pollution of groundwater, especially in developing countries. Bentonite has been proven to be effective in enhancing the membrane property of clay, by which landfill liners can have better barrier performance towards the migration of contaminants. In this study, 5% sodium bentonite amended with locally available Fukakusa clay was utilized to evaluate the membrane behavior towards the heavy metals zinc and lead. The chemico-osmotic efficiency coefficient, ${\omega}$, was obtained through Zn(II) and Pb(II) solutions with different concentrations of 0.5, 1, 5, 10, and 50 mM. According to the results, ${\omega}$ continually decreased as the Zn(II) and Pb(II) concentrations increased, which is consistent with the Gouy-Chapman theory. Compared to normal inorganic ions, the membrane behavior towards heavy metal ions was lower. The migration of heavy metal ions was not observed based on experimental results, which can be attributed to the adsorption or ion exchange reaction. The mechanisms of the membrane performance change were discussed with the assistance of XRD patterns, free swelling results, XRF results, and SEM images.

• 방사성폐기물학회지
• /
• 제20권4호
• /
• pp.469-488
• /
• 2022

Technology for high-level-waste disposal employing a multibarrier concept using engineered and natural barrier in stable bedrock at 300-1,000 m depth is being commercialized as a safe, long-term isolation method for high-level waste, including spent nuclear fuel. Managing heat generated from waste is important for improving disposal efficiency; thus, research on efficient heat management is required. In this study, thermal management methods to maximize disposal efficiency in terms of the disposal area required were developed. They efficiently use the land in an environment, such as Korea, where the land area is small and the amount of waste is large. The thermal effects of engineered barriers and natural barriers in a high-level waste disposal repository were analyzed. The research status of thermal management for the main bedrocks of the repository, such as crystalline, clay, salt, and other rocks, were reviewed. Based on a characteristics analysis of various heat management approaches, the spent nuclear fuel cooling time, buffer bentonite thermal conductivity, and disposal container size were chosen as efficient heat management methods applicable in Korea. For each method, thermal analyses of the disposal repository were performed. Based on the results, the disposal efficiency was evaluated preliminarily. Necessary future research is suggested.

• Korean Chemical Engineering Research
• /
• 제51권3호
• /
• pp.382-387
• /
• 2013

압출 컴파운딩 공정 및 케스팅 필름 공정을 이용하여 생분해성 폴리우레탄(PU)/클레이 나노복합 필름을 제조하였다. PU 수지와의 강한 결합 형성을 위해 유기적으로 개질되어 그 표면에 많은 양의 히드록시기를 갖는 MMT 나노클레이(C30B)를 사용하였다. 압출 공정 중 발생된 높은 전단 응력에 의해 발현된 복합체 내 나노판상체의 삽입/박리 구조 및 분산 상태를 XRD 분석 및 TEM 관찰을 통해 확인하였다. 또한 제조된 나노복합체의 유변물성, 인장물성, 투명성, 산소투과도의 변화를 첨가된 나노클레이 함량에 따라 조사하였으며, 이로부터 나노복합체 내 나노판상체의 박리 및 분산 구조와 물성과의 상관 관계를 제시할 수 있었다. 일정수준의 함량으로 첨가된 나노클레이는 복합 필름의 인장 탄성율, 연신율, 투명성, 산소차단성 등의 성능 향상에 뚜렷하게 기여하였으나, 그 이상의 함량으로 첨가되면 불완전한 박리 및 불균질한 분산성으로 인하여 오히려 성능이 감소하거나 또는 그 증가 폭이 매우 작은 것으로 나타났다. PU/clay 나노복합 필름의 생분해성은 퇴비화 실험을 통한 분해시간에 따른 필름의 산소투과도 및 인장물성의 변화를 관찰함으로써 확인하였다.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 봄 학술발표회 논문집
• /
• pp.72-74
• /
• 2003

There has been extensive interest in the development of new nanocomposites. One kind of these systems is the hybrid based on organic polymers and inorganic minerals consisting of layered silicates. Some properties like stiffness, strength, barrier properties, thermal, and oxidative stability can be improved by the presence of the filler in the polymeric matrix[1]. It is reported that, in the nylon 6/clay nanocomposites, the modulus is increased, but impact strength and elongation at break are drastically decreased. (omitted)

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2005년도 총회 및 춘계학술발표회
• /
• pp.110-113
• /
• 2005

The objective of this study was to examine the effect of proposed permeable eobarrier system for removal of PCE from groundwater. The materials used for the natural geobarrier are gravel bean and silty clay. In addition, the effect of Pyeongtaek soil on PRB assessed in this experiments. It was observed that the adsorption of PCE in natural geobarrier system is eligible for real site. However, natural geobarrier system has various factors based on using materials. Therefore, more laboratory work is needed to study about permeable geobarrier.

• 멤브레인
• /
• 제15권4호
• /
• pp.255-271
• /
• 2005

고분자/층상실리케이트 나노복합체(polymer/layeres silicate nanocomposite, PLSNs) 필름은 보통 내부층을 나트륨과 같은 양이온을 이용한 이온교환을 통해 유기화된 clay로 만든 재료의 새로운 형태이다. 이것은 중합법, 용액법, 그리고 용융법과 같은 다양한 방법으로 제조할 수 있으며, 열경화성, 열가소성이나 탄성고분자와 같은 넓은 범위의 고분자를 기질로 사용할 수 있다. PLSNs 필름은 고분자 사슬이 일정한 간격으로 쌓여있는 실리케이트에 삽입하여 간격을 넓히는 삽입형과 각각의 실리케이트 층이 고분자 기질에 불균일하게 분산되어 형성하는 박리형 두 가지 형태의 구조를 얻을 수 있다. 이러한 새로운 분야의 재료는 보통 5 wt$\%$ 이하의 소량의 clay 함유만으로도 향상된 기계적, 열적 특성을 얻을 수 있다. 그리고 clay의 함유량이 증가할수록 기체 투과경로인 tortuosity가 증가하여 기체 투과도가 감소한다.

• Nuclear Engineering and Technology
• /
• 제44권1호
• /
• pp.89-102
• /
• 2012

The buffer and backfill are important components of the engineered barrier system in a high-level waste repository, which should be constructed in a hard rock formation at a depth of several hundred meters below the ground surface. The primary function of the buffer and backfill is to seal the underground excavation as a preferred flow path for radionuclide migration from the deposited high-level waste. This study investigates the hydraulic conductivity and swelling pressure of Kyungju Ca-bentonite, which is the candidate material for the buffer and backfill in the Korean reference high-level waste disposal system. The factors that influence the hydraulic conductivity and swelling pressure of the buffer and backfill are analyzed. The factors considered are the dry density, the temperature, the sand content, the salinity and the organic carbon content. The possibility of deterioration in the sealing performance of the buffer and backfill is also assessed.