• 한국해양공학회지
• /
• 제4권1호
• /
• pp.110-119
• /
• 1990

This study is concerned about the stress concentration factor measurement by photoelastic method, for the case of two circular holes arrangement in 3mm semi-infinite plate under tensile load, the ratio of those two circular holes diameter, the ratio of distance apart from circular holes to breadth and the two holes arrangement angle with loading direction were varied. Besides, the measured stress concentration by photoelastic method around one circular hole was compared with that by strain-gage method.

• Structural Engineering and Mechanics
• /
• 제85권5호
• /
• pp.645-654
• /
• 2023

Based on first-order shear deformation theory, a wave propagation model of graphene platelets reinforced metal foams (GPLRMFs) circular plates is built in this paper. The expressions of phase-/group- velocities and wave number are obtained by using Laplace integral transformation and Hankel integral transformation. The effects of GPLs pattern, foams distribution, GPLs weight fraction and foam coefficient on the phase and group velocity of GPLRMFs circular plates are discussed in detail. It can be inferred that GPLs distribution have great impacts on the wave propagation problems, and Porosity-I type distribution has the largest phase velocity and group velocity, followed by Porosity-III, and finally Porosity-II; With the increase of the GPLs weight fraction, the phase- and group- velocities for the GPLRMFs circular plate will be increased; With the increase of the foam coefficient, the phase- and group- velocities for the GPLRMFs circular plate will be decreased.

• 대한조선학회지
• /
• 제12권1호
• /
• pp.1-8
• /
• 1975

As a first step of a thermal stress analysis in a watertight bulkhead plate during welding of a spool type penetration piece, the bulkhead plate has been idealized as infinite plate with a circular hole. The exact solution for the transient temperature distribution and the associated quasi-static thermal stress which arise in a infinite plate subjected to an instantaneous point source of heat acting on the periphery of the circular hole. And the solutions have been extended to the case of a moving heat source with the aid of the Duhamel's superposition integral. The solutions can be applied to the problems such as a circular cutting or welding of a plate.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.419-422
• /
• 2005

Global bifurcations and chaos in modal interactions of an imperfect circular plate with one-to-one internal resonance are investigated. The case of primary resonance, in which an excitation frequency is near natural frequencies, is considered. The damping force is not included in the analysis. The renormalization-group technique for KAM tori is used to obtain the criteria for large-scale stochasticity in the system.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.731-734
• /
• 1997

In this study, a shape optimization is performed for circular and elliptical holes to reduce weight of a plate. It is accomplished in reference to the results of topology optimization of the square plate with circular hole. From the results. it is concluded that the stress values of shape optimization of them are satisfied with 100MPa of constraint condition.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.504-514
• /
• 2003

We investigate global bifurcation in the subharmonic motion of a circular plate with one-to-one internal resonance. A system of autonomous equations are obtained from the partial differential equations governing the system by using Galerkin's procedure and the method of multiple scales. A perturbation method developed by Kovacic and Wiggins is used to find Silnikov type homoclinic orbits. The conditions under which the orbits occur are obtained.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.287-296
• /
• 2003

We investigate global bifurcation in the motion of an harmonically excited circular plate with one-to-one internal resonance. A perturbation method developed by Kovacic and Wiggins is used. Silnikov type homoclinic orbit has been pursued but it has turned out not to exist.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.140-144
• /
• 2004

Global bifurcations and chaos in modal interactions of an imperfect circular plate with one-to-one internal resonance are investigated. The case of primary resonance, in which an excitation frequency is near natural frequencies, is considered. The damping force is not included in the analysis. The Melnikov's method for heteroclinic orbits of the autonomous system was used to obtain the criteria for chaotic motion.

• Geomechanics and Engineering
• /
• 제19권1호
• /
• pp.29-36
• /
• 2019

The present research deals with the deformation in transversely isotropic thin circular thermoelastic rotating plate due to time-harmonic sources. Frequency effect in the presence of rotation and two temperature is studied under thermally insulated as well as isothermal boundaries. The Hankel transform technique is used to find a solution to the problem. The displacement components, stress components, and conductive temperature distribution with the radial distance are computed in the transformed domain and further calculated in the physical domain using numerical inversion techniques. Some specific cases are also figured out from the current research.

• 동력기계공학회지
• /
• 제18권6호
• /
• pp.64-69
• /
• 2014

A circular plate is one of the important structures in many industrial fields. In static analysis of a circular plate, we may obtain an exact solution by analytical method, but it is limited to a simple circular plate. Thus, many researchers and designers have used numerical methods such as the finite element method. The authors of this paper developed the finite element-transfer stiffness coefficient method (FE-TSCM) for static and dynamic analyses of various structures. FE-TSCM is the combination of the modeling technique of the finite element method (FEM) and the transfer technique of the transfer stiffness coefficient method (TSCM). FE-TSCM has the advantages of both FEM and FE-TSCM. In this paper, the authors formulate the computational algorithm for the static analysis of axisymmetric circular plates under lateral loading using FE-TSCM. The computational results for three computational models obtained by FE-TSCM are compared with those obtained by FEM in order to confirm the accuracy of FE-TSCM.