The Effect of Two Circular Holes Arrangement on the Stress Concentration Factor in a Semi-infinite Plate

양무한평판의 두 원공비렬이 응력집중에 미치는 영향

  • 오세욱 (동아대학교, 기계공학과) ;
  • 박영철 (동아대학교, 기계공학과) ;
  • 김준영 (동아대학교, 기계공학과)
  • Published : 1990.06.01

Abstract

This study is concerned about the stress concentration factor measurement by photoelastic method, for the case of two circular holes arrangement in 3mm semi-infinite plate under tensile load, the ratio of those two circular holes diameter, the ratio of distance apart from circular holes to breadth and the two holes arrangement angle with loading direction were varied. Besides, the measured stress concentration by photoelastic method around one circular hole was compared with that by strain-gage method.

Keywords

References

  1. Phil. Mag. v.32 Study of Stresses in a Beam with a Concentrated Load Wilson,B.C.
  2. 應力集中 西田正孝
  3. Phil. Trans. ROY. Soc. A v.229 On the Stresses in the Neighborhood of Circular Hole in a Strip under Tension Howland,R.C.J.
  4. NASA TND-6376 An Improved Method of Collocation for the Stress Analysis of Creacked Plated with Various Shaped Boundaries Newman,J.C.Jr.
  5. Eng. Frac. Mech. v.4 A Note on a Central Crack in a Strip under Uniaxial Tension Tada,H.
  6. 光彈性實驗法 십二郞
  7. 日本機械學會論文集 v.55 no.514 平面偏光光彈性實驗における主應力方向の全域自動計算と等色線分離 馬渡진夫
  8. 入門 光彈性實驗法 益田義治
  9. 日本機械學會論文集 v.45 no.399 2圖孔を特つ帶板の引張り 濱田 實
  10. Mech. Eng. v.58 Photoelastic Studies in Stress Concentrations Frocht,M.M.
  11. Photoelasticity v.1 Frocht,M.M.
  12. Experimental Stress Analysis(2nd ed.) Dally,J.W.;W.F.Riley