• 한국전자파학회논문지
• /
• 제10권2호
• /
• pp.227-236
• /
• 1999

유한 차분 시간 영역법 (Finite Difference Time Domain Method FDTD)은 다양한 마이크로파 회로를 해석하는데 널리 이용된다. 그런데 이를 위한 기존의 소스 모델링 방법은 제한이 많고, 일반적인 형태의 회로 에 적용하기 어렵다. 따라서 본 논문에서는 여러 가지 마이크로파 회로를 효율적으로 해석하기 위해 내부 저 항 소스 모델링 (Internal Resistive Source M$\alpha$ieling)을 적용한다. 몇 개의 마이크로파 회로에 대하여 하드 소스 모델령 (Hard Source M$\alpha$ieling)을 이용한 결과와 비교하여 계산 시간이 현저하게 단축됨을 보이므로서 그 효율성을 입증하고, 기존의 소스 모텔링을 이용한 결과 및 측정치와도 비교함으로써 정확성을 입증한다.

• 대한전자공학회논문지
• /
• 제10권6호
• /
• pp.11-24
• /
• 1973

본 논문에서는 전압안정 및 전류안정부저항영역을 갖는 2단자회로를 해석함에 있어서 따로 입력변화의 함수로서 표시되는 등가주전력을 사용하였고 부저항회로에 대한 간단한 새로운 통일된 해석을 할 수 있음을 도시법을 기초로 하여 제시하였다. 이 해석에 의거한 설계방법의 예로서 접합트랜지스터를 사용한 부성저항회로구성을 하였으며 이 회로를 기본으로 하여 SCR, GTO-SCR 및 SSS 특성의 한 모데링회로를 제안하였다. 이들 모데링회로의 촙핑회로, 톱니파발생회로 및 교류위상제어회로로서의 응용예와 그 특성을 아울러 검토하였다.

• 산업기술연구
• /
• 제27권A호
• /
• pp.149-155
• /
• 2007

The counter emf(electromotive forces) of a permanent magnet multi-phase brushless motor is generally a non-sinusoidal wave or a non-ideal trapezoid. So, conventional modeling using a sinusoidal wave or an ideal trapezoid counter emf can result in errors. In order to reduce modeling errors for simulation and analysis the properties of a multi-phase brushless AC motor, this paper proposes a phase variable model that is a mixed modeling technique using both Finite Element Analysis(FEA) based circuits and motor voltage equations. The phase model parameters including the counter emf voltage waveform are obtained by using of FEA, and the mixed modeling technique based on circuits and equations is used to implement a simulation model for multi-phase brushless AC motors with any counter emf voltage waveforms. Adequacy of the proposed model is established from the simulation and experimental results for a seven-phase brushless motor.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(II)
• /
• pp.1516-1520
• /
• 1987

This paper proposes fault simulation algorithms for Domino CMOS circuits, The inputs having fanouts are described correctly in the algorithms by modeling the functional block in the Domino CMOS circuits as Modified dependency matrix. The proposed algorithms generate easily the test sequence which can detect the s-a-O, s-a-I, stuckopen faults in the Domino CMOS circuits.

• Journal of electromagnetic engineering and science
• /
• 제13권1호
• /
• pp.54-61
• /
• 2013

An equivalent model has been developed to estimate the electromagnetic immunity for integrated circuits under a complex electromagnetic environment. The complete model is based on the characteristics of the equipment and physical configuration of the device under test (DUT) and describes the measurement setup as well as the target integrated circuits under test, the corresponding package, and a specially designed printed circuit board. The advantage of the proposed model is that it can be applied to a SPICE-like simulator and the immunity of the integrated circuits can be easily achieved without costly and time-consuming measurements. After simulation, measurements were performed to verify the accuracy of the equivalent model for immunity prediction. The improvement of measurement accuracy due to the added effect of a bi-directional coupler in the test setup is also addressed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.346-350
• /
• 1996

This paper presents a Neural Network Identification (NNI) method for modeling of highly complicated nonlinear and time varing human system with a pneumatically driven mock circulation system of Left Ventricular Assist Device(LVD). This system consists of electronic circuits and pneumatic driving circuits. The initation of systole and the pumping duration can be determined by the computer program. The line pressure from a pressure transducer inserted in the pneumatic line was recorded. System modeling is completed using the adaptively trained backpropagation learning algorithms with input variables, Heart Rate(HR), Systole-Diastole Rate(SDR), which can vary state of system, and preload, afterload, which indicate the systemic dynamic characteristics and output parameters are preload, afterload.

• 전기의세계
• /
• 제23권6호
• /
• pp.18-19
• /
• 1974

회로이론의 분야는 꾸준히 성장하여 왔고 System modeling과 system analysis가 새로운 분야로서 등장되어 IEEE에서도 1972. 9. 18. Circuits group를 circuits & Systems Society로 개칭하게 되었다. 회로이론과 그 기교는 비단 전기 및 전자공학에만 적용되는것이 아니라 대시스템분야, 생의학분야, 경제분야에도 공히 적용될 수 있다. 본고에서는 회로 및 시스템분야에 있었던 주요 연구경향을 1974 IEEE International Symposium on Circuits and System에 근거를 두고 미국중심으로 살펴보고 국내 전기 및 전자공학회지를 추적하여 최근의 국내 및 국외 연구동향에 대하여 알아보고자 한다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 하계학술대회 논문집
• /
• pp.135-137
• /
• 2007

A phase shifted full-bridge PWM converter (PSFBC) has been used as the most popular topology for many applications. But, for the reasons of the cost and performance, the control circuits for the PSFBC have generally been implemented using analog circuits. The studies on the digital control of the PSFBC were recently presented. However, they considered only the digital implementation of the analog controller. This paper presents the modeling and design of the digital controller for the PSFBC in the discrete time domain. The discretized PSFBC model is first derived considering the sampling effect. Based on this model, the digital controller is directly designed in discrete time domain. The simulation and experimental results are provided to verify the proposed modeling and controller design.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
• /
• pp.600-602
• /
• 2006

Some abnormal signals diagnostics and analysis through an important equivalent circuits modeling for passive elements under severe accident conditions have been performed. Unlike the design basis accidents, there are inherently some uncertainties in the instrumentation capabilities under the accident conditions. So, the circuit simulation analysis and diagnosis methods are used to assess instruments in detail when they give apparently abnormal readings as an accident alternative method. The simulations can be useful to investigate what the signal and circuit characteristics would be when similar to a variety of symptoms that can result from the environmental conditions such as high temperature, humidity, and pressure condition. In this paper, a new simulator through an analysis of the important equivalent circuits modeling under temperature accident conditions has been designed, the designed simulator is composed of the LabVIEW code as a main tool and the out-put file of the Multi-SIM code as an engine tool is exported to in-put file of the LabVIEW code. The procedure for the simulator design was divided into two design steps, of which the first step was the diagnosis method, the second step was the circuit simulator for the signal processing tool. It has three main functions which are a signal processing tool, an accident management tool, and an additional guide from the initial screen. This simulator should be possible that it could be applied a output signal analysis to some transient signal by variation of the resistance passive elements in the R-L-C equivalent circuit modeling under various degraded conditions in NPPs.

• 한국전자파학회논문지
• /
• 제13권6호
• /
• pp.528-537
• /
• 2002

본 논문에서는 능동소자를 포함하는 마이크로파 회로의 주파수 특성을 해석하기 위하여 확장된 유한차분 시간영역법 (FDTD) 을 이용했다. R, L, C와 같은 집중소자가 전송선로에 삽입된 FDTD 집중소자 모델링을 통해 하이브리드 회로 해석에 대한 기초 연구를 수행하였고, 네트워크 모델링을 이용하여 기생 커패시턴스와 인덕턴스의 값을 추출함으로써 보다 정확한 기생, 방사, 결합까지 고려하는 FDTD만의 고유한 주파수 응답을 확인할 수 있었다. 또한 FDTD를 이용하여 모델링된 다이오드를 사용한 평형 혼합기를 설계하여 상용 회로 시뮬레이터보다 정확하고 실제적인 회로의 주파수 응답을 획득하였다.