• Korean Journal of Soil Science and Fertilizer
• /
• v.32 no.4
• /
• pp.383-397
• /
• 1999

For sites to be investigated, the results of such an investigation can be used in determining foals for cleanup, quantifying risks, determining acceptable and unacceptable risk, and developing cleanup plans t hat do not cause unnecessary delays in the redevelopment and reuse of the property. To do this, it is essential that an appropriately detailed study of the site be performed to identify the cause, nature, and extent of contamination and the possible threats to the environment or to any people living or working nearby through the analysis of samples of soil and soil gas, groundwater, surface water, and sediment. The migration pathways of contaminants also are examined during this phase. Key aspects of cost-effective site assessment to help standardize and accelerate the evaluation of contaminated soils at sites are to provide a simple step-by-step methodology for environmental science/engineering professionals to calculate risk-based, site-specific soil levels for contaminants in soil. Its use may significantly reduce the time it takes to complete soil investigations and cleanup actions at some sites, as well as improve the consistency of these actions across the nation. To achieve the effective site assessment, it requires the criteria for choosing the type of standard and setting the magnitude of the standard come from different sources, depending on many factors including the nature of the contamination. A general scheme for site-specific assessment consists of sequential Phase I, II, and III, which is defined by workplan and soil screening levels. Phase I are conducted to identify and confirm a site's recognized environmental conditions resulting from past actions. If a Phase 1 identifies potential hazardous substances, a Phase II is usually conducted to confirm the absence, or presence and extent, of contamination. Phase II involve the collection and analysis of samples. And Phase III is to remediate the contaminated soils determined by Phase I and Phase II. However, important factors in determining whether a assessment standard is site-specific and suitable are (1) the spatial extent of the sampling and the size of the sample area; (2) the number of samples taken: (3) the strategy of taking samples: and (4) the way the data are analyzed. Although selected methods are recommended, application of quantitative methods is directed by users having prior training or experience for the dynamic site investigation process.

• The Journal of Korean Academy of Prosthodontics
• /
• v.51 no.2
• /
• pp.99-106
• /
• 2013

Purpose: The aim of this research was to establish the effect and variation in differing convergence angle and length of abutment on the retention of full veneer casted gold crown. Materials and methods: Two different length,5 mm and 10 mm in height with convergence angles of 5, 10, 15 and 25 degrees crowns were fabricated. Cementation was done using cements; zinc phosphate cement (Fleck's zinc phosphate cement), resin-modified glass ionomer cement (Vitremer) and resin cement (Panavia 21). These were tested for tensile force at the point of separation by using Instron Universal Testing Machine. Statistical analysis was done by SAS 6.04 package. Results: In all cements the mean retention decreased with significant difference on increase of convergence angle (P<.05). Increase in every 5 degree-convergence angel the retention rate decreased with resin-modified glass ionomer cement of 15.9% and resin cement of 14.8%. With zinc phosphate cement, there was largest decreasing rate of mean retention of 25.5% between convergence angles from 5 degree to 10 degree. When the crown length increased from 5 mm to 10 mm, the retention increased with the significant difference in the same convergence angle and in all types of cement used (P<.05). Conclusion: The retention was strongly dependent on geometric factors of abutment. Much care is required in choosing cements for an optimal retention in abutments with different convergence angles and crown lengths.

• Journal of Korean Society of Transportation
• /
• v.24 no.1 s.87
• /
• pp.29-38
• /
• 2006

After the first opening of the KTX in April 2004, travel time between major cities has been dramatically reduced. The reduction rates range from 32% to 47%. Considering travel time reduction between major cities, this study concerned about the intercity travel impact of the KTX operation. This study aimed to analyze intercity mode choice behavior of Daegu Citizens according to the first opening of the KTX. This study takes place in two sections. These are (i) the section of KTX between Daegu and Seoul, and (ii) the section of KTX between Daegu and Daejeon. This study estimated empirical models for analyzing intercity mode choice behavior according to the first opening of the KTX. This study makes use of the data from travel survey from Daegu metropolitan area. The main part of the survey was carried out in the KTX Dong-Daegu station. The survey data includes the information on travel from Daegu to Daejeon and from Daegu to Seoul. In order to analyze intercity choice behavior according to the frist opening of the KTX, multinomial model structure is used. For the model specification, a variety of behavioral assumptions about the factors which affect the mode choice, were considered. From the empirical model estimation, it is found that OVTT(Out-of-Vehicle Travel Time), OVTC(Out-of-Vehicle Travel Cost), IVTT(In-Vehicle Travel Time), IVTC(In-Vehicle Travel Cost), travel frequency, travel purpose, sex, age, occupation. household income, individual income are significant in choosing intercity travel mode. However, it is found that the intercity nde choice behavior is different between (i) the section of KTX between Daegu and Seoul, and (ii) the section of KTX between Daegu and Daejeon. Furthermore, some policy implications are discussed in conclusion.

• Journal of Technologic Dentistry
• /
• v.31 no.1
• /
• pp.37-54
• /
• 2009

The purpose of this thesis is to address the imbalance between supply and demand of dental lab technicians and to propose its solutions by analyzing the improvement of employment rate of graduates of dental technology schools in Daegu area and the supply and demand of the technician workforce. Preliminary and full-scale surveys were performed from Aug. 10 to Oct. 10 in 2008 on 150 junior students of dental technology schools who finished their on-the-job-training and 150 dental technicians who were working for dental laboratory in Daegu by self-assessment questionnaire. Followings are the findings of this study. First, regarding the gender of the dental technicians, 32.7% of respondents were female 67.3% were male. Concerning age, respondents younger than 29 years-old occupied the highest percentage(39.3%). With respect to the lab technology school they graduated, DaeguHealthCollege took the largest proportion of 87.3%. With regard to interpersonal relationship at the school, 58.0% of respondents felt their relationship 'smooth'. Second, about the motive of choosing to be a lab technician, the biggest proportion of the respondents(34.7%) replied that 'because it is professional'. Regarding the degree of satisfaction about the profession, 'so-so' was the answer with the biggest percentage(51.3%) followed by 'satisfied'(32.0%) and 'unsatisfied'(16.7%). It showed that respondents were generally satisfied with their major. Third, regarding relevance of on-the-job-training with 'preparation for the employment', highest percentage of both students and lab technicians(50.0%) replied 'so-so'. With respect to 'necessity of practical education', highest percentage of the students and lab technicians replied 'relating didactic education in college to the real world' with 52.7% and 40.7% respectively. With regard to 'the aim of on-the-sport-training', 'practical training of didactic education' was chosen by 54.0% and 47.3% respectively. Fourth, with regard to the 'types of college education advantageous for the employment', both students and lab technicians groups chose 'practical training' with the highest percentage. Concerning 'helpfulness of clinical training on employment', students answered 'so-so' and 'helpful' by 50.0% and 42.7% respectively and dental technicians replied similarly by 50.0% and 46.0% respectively. Fifth, with regard to the influence of financial factors on the supply and demand of dental technician(question #1), 68.0% of respondents agreed that 'salary plays key role in the supply and demand of the work force'. Concerning the question about working condition, respondents requested better working environment. With reference to interpersonal relationship at the laboratory, respondents replied that interpersonal relationship affects the duration of the employment it was found out that there were many conflicts with colleagues or dental office. Sixth, regarding the satisfaction about their profession according to the characteristics of the respondents more respondents were 'satisfied'(10.30 points) with their profession and 'unsatisfied' were 9.47 points and the difference was statistically significant(p<0.05). According to the findings of this study, practical education on campus and on-the-job-training are as important as didactic education at class due to the characteristics of dental technology major. It was found that more practical training is related to higher employment rate. Therefore, efficiency of on-the-job-training by college education should be increased raise employment rate of the graduates and reduce the unemployment. Up-to-date information needs to be promptly delivered and future vision should be presented to the students to raise their satisfaction about the profession. In addition, to reduce dental technician's frequent change of their workplace after facing with the reality of the profession after graduation, related organizations should make an effort to present better future than now.

• Journal of Nutrition and Health
• /
• v.53 no.1
• /
• pp.54-67
• /
• 2020

Purpose: This study examined the relationship between job stress, attributes of health functional food (HFF) selection, and consumption values for information technology (IT) workers, and analyzed the factors influencing the selection of HFF to improve health by making the right choice of HFFs. Methods: Three hundred forty IT workers in Gyeonggi area participated in the study. The participants were divided into low or high job stress group. The differences in participants' general characteristics, attributes of HFF selection, and HFF consumption values were investigated, and the mediating effects of HFF consumption values on the relationship between job stress levels and the HFF selection attributes were analyzed. Results: Job stress levels were high in those IT workers with a length of service < 5 years (p = 0.013). The group with lower job stress levels had a higher tendency to consider the ingredients contained in HFF products (p < 0.001), and their efficacy (p = 0.047). They also showed greater emotional value for a sense of security from consuming HFFs to stay healthy (p = 0.047). The group with higher job stress levels had greater epistemic value in that their choice of HFFs differentiated them from the other workers (p = 0.036). Higher job stress was associated with less consideration of the intrinsic attributes such as ingredients and efficacy of the HFF selection attributes (p = -0.113), emotional value of the HFF consumption values (p = -0.136), and the functional value such as practicality, price, and safety (p = -0.134). The job stress level influenced the intrinsic attributes through the functional and emotional values, demonstrating that the functional and emotional values had appropriate mediating effects on the relationship between job stress levels and intrinsic attributes. Conclusion: Education needs to be provided for workers to relieve job stress and improve the functional and emotional values, which contributes to choosing the appropriate HFFs.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.47 no.1
• /
• pp.53-61
• /
• 2020

Midazolam is a short-acting benzodiazepine that is widely used in pediatric dental sedation. However, its clinical effectiveness as an intravenous sedative agent in children has not been widely documented. A retrospective study was conducted to evaluate the efficacy and safety of intravenous midazolam and nitrous oxide inhalation sedation in pediatric dental treatment. The subjects were 115 patients (118 cases) who received dental treatment under intravenous midazolam and nitrous oxide inhalation sedation. Demographic factors, general health status, sedation time, midazolam and nitrous oxide dosage, and success rate of sedation were evaluated from electronic medical records. Behavioral management was the main reason of choosing sedation. Mean duration of sedation was 56.7 minutes for surgical treatment, and 74.4 minutes for restorative treatment. The initial dosage of intravenous midazolam was 0.051 ± 0.019 mg/kg. In 34 cases (28.8%), additional midazolam of 0.036 ± 0.057 mg/kg was delivered during the treatment. The concentration of nitrous oxide was maintained between 40% and 50%. The success rate of sedation was 99% (n = 117). In 1 case, laryngospasm occurred and the patient was reversed with benzodiazepine antagonist, flumazenil. Intravenous midazolam sedation with nitrous oxide was shown to be clinically effective for the dental treatment in children, if administered by trained personnel and patients are carefully selected in accordance with guidelines.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.2
• /
• pp.300-308
• /
• 2014

The purpose of this study was to investigate the night eating habits of middle schoolers. A total of 705 middle school students residing in Gyeonggi were surveyed about their dietary habits related to night eating. Among the total subjects, 59.9% (n=422) had night eating more than once a week and were classified into a night eating group (NEG). The main reason for night eating was hunger (79.1% of NEG) and the highest proportion of night eating was related to food purchased by family (39.3% of NEG). Most of the NEG had night eating in their home with family members, and the time with highest frequency of night eating was between 10 p.m. and 11 p.m.. About 33% of the NEG went to bed within an hour after night eating and 69.2% of the NEG did not report any change after night eating. The most common factors considered when choosing a night eating menu, in order of frequency, were taste, hygiene, and amount. The favorite items on the night eating menu were frozen desserts, fresh fruits, chicken, fruit juice, Ramen, pizza, and Jajangmyeon. The most frequent menu choices were fresh fruits, frozen desserts, Ramen, chicken, yogurt, and fruit juice. The NEG had higher scores for picky eating (P<0.01), overeating (P<0.01), salty eating (P<0.01), and irregular meal times (P<0.001) compared to the non-NEG. Consequently, the NEG had more dietary problems than the non-NEG and their night eating behaviors were related to family habits. Night eating was mainly dominated by a diet of carbohydrates and fats, and the intake frequency and preference for foods with low nutritional value were high; thus, a practical and systematical nutrition education is required. Seasonal and comparative studies on night eating status according to various times and amounts of night eating are also required.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.15 no.3
• /
• pp.175-189
• /
• 2020

While there have been many previous studies showing that an entrepreneur's personal characteristics have a significant impact on his intention to start a business, there was relatively little research on the inherent mechanisms for this. Recent researches show that entrepreneur's personal characteristics affect the entrepreneurial intention through entrepreneurial attitude and perceived behavioral control, rather than directly. This study carried out empirical research on 233 Chinese university students on what personal characteristics affect the entrepreneurial intention of Chinese university students, who are actively engaged in start-up activities recently. Based on the theory of planned behavior, we set entrepreneurial attitude and perceived behavioral control as important variables that shape the entrepreneurial intention and formed a model and hypotheses that personal characteristics of a potential entrepreneur(leadership, planning, innovation, sociality) affect the entrepreneurial intention through these two variables. We verified these hypotheses by regression analysis and structural equation model. The analysis confirmed that for Chinese university students the entrepreneurial attitude and perceived behavioral control were important antecedent variables that shape the entrepreneurial intention. It was also shown that leadership and innovation have a positive influence on the entrepreneurial attitude, while leadership and planning raise the level of perceived behavioral control. As a result, leadership forms the entrepreneurial intention through the entrepreneurial attitude and perceived behavior control, and innovation affects the entrepreneurial intention through the entrepreneurial attitude, while planning affects the entrepreneurial intention through perceived behavior control. Therefore, entrepreneurship education that emphasizes leadership, innovation and planning is required for Chinese college students as a potential entrepreneur. These three factors could also be important personal characteristics when choosing a potential entrepreneur.

• Journal of the Korean Society of Costume
• /
• v.22
• /
• pp.263-276
• /
• 1994

The achievement of notable social reoforms attained during the period of 19th and 20th centuries needlessly speaking remodelded the social environmental into several different patterns such as :1) high industrialization 2) propensity to consume 3) up graded overall social stands. Accordingly the industrial world of the but-tons too established the mess production syhstem by breaking from convention of hand-craft work of 17th century. The raw materials used in the production line on buttons during the 20th century are almost all-kind of materials one can possibly named including cheap plastic which enabled production lines to produce cheaper but higher productivities of the buttons being produced, The design (incused design) used in the 19-20h centuries are : men landscape, sports features, birds, livestocks, bugs, or geomatric features, tec, 1, The classification o f the buttons by materials Techniques shapes colors marking (Incused design) used in the productionof buttons in the England United States of America Laska Italy france Denmark Japan and India are categolizzed as : natural raw materials and syntetical resines. 1) Of the natural raw materials used are : Matal Enamel Iodine Agate, Coral, Green jade(Jasper) Granite, Wood, Ivory, Horn and bone etc. 2) The sythetical resin used in the button in-dustries are : Artificial jewell glass Acrylic material Styroform Celluloid and Nylon etc. 2. The thecnique quoted in producing buttons are hand craft work inlay work precision casting press mosic dye etching, processing, engraving and embossed carving etc. 3. The major designs used in the buttons in -dustries are : Round shape however elliptical column angular and edge shape often used. 4. The colors used are : The multi-colors were highly used than mono-colored materials such as : Adjoining Color and Contrast Color. The highest consideration to be considered in choosing the colors for the buttons are harmonization and matching factor with the garment or dresses to be wore. 5. The major design(incused design) on the buttons are embodiment and the design were also used in order of abstractive-combination abstractive with has offers much surprising. The button industries during the 19th and 20th centuries were not only the determination factors those can judge the value of self-pride of Nation and which were far beyond the in-dustrial arts in those days but also highly refelected and influenced by cultural sense ideology and self-pride of the Nation of those period. The followings are details of the role of the buttons categolized in the order of functional ornamental and symbolical aspects : 1. The functional role : The functional role of the buttons were simply designed for dress how-ever the buttons beyond from this role of function now a days. 2. The ornamental role : The ornamental role of he button beyond from this role of the button were effectuated by : 1) shape materials colors 2) technique locations size and design (incused design) 3) The ramaterials used for buttons shall not be over looked because it is highly depends on the taste sense and combination of harmony with the garment to be wore. 4) The color of the buttons are made well contrasted with the color of garments just as in the case of other artistical area such as matchs with the color of garment of contrast with brigtness of colors contrasted as complementary color and so and so. 5) The technique being adoped are: precision casting press handcraft inlay work etching mosic etc,. Since the buttons are no longer a simple catching devise used to fasten together the different part of the dress but now it has formed own and occupied the independent role in the garment or dresses location can be de-termined and varying depending on the ideas of designers. The size of the buttons has no specific limits, However the variation has widely dependined on the entire circumperence rhythm contrast harmonization of the garments. 3. The symbolical role : Since the button is no longer a just a simple devise for catching and fastening device used fastening together the different part of the garments but now were built a independent area as major part of the Garment and well reflected all kinds of occupations political background cultural as-pect etc. on the buttons. The design of buttons in the western circles are more simplified but they are polished looks and their techniques of manufacturing are comination of both machanis and handcraft. The colors used in the buttons are pretty well harmonized with garment(dress). Almost all kind of materials can be used in the but-tons however materials used in the buttons are : Bone of livestocks ivory, turtle shell are no longer used because the prevention of cruely of animal. On the contraly the level of buttons indus-try of Korea is far to reach and catch up with the level of western circles. It is highly suggested therefore the but-tons industrial field of Republic of Korea shall place and encouragement in producing beter industrial environment of the buttons based on the traditional and cultural aspect of republic of Korea to produce both manufacturing of qulified and best designed and colored buttons.

• Clinical and Experimental Pediatrics
• /
• v.45 no.5
• /
• pp.575-587
• /
• 2002

Objective : To investigate the understanding of breast-feeding in pregnant woman and the proper way of encouraging breast-feeding. Methods : Each questionnaire included items about demographic characteristics and the understanding of breast-feeding. The questionnaires were filled up by pregnant women visiting obstetric clinics in Seoul and its vicinities, Busan, Choongjoo and Chungjoo from July 2001 to August 2001. One thousand, two hundred ninety questionnaires were analysed by Chi square tests and multiple logistic regressions. Results : The majority of pregnant women(87.4%) planned breast-feeding. Forty three percent of them had plans to breast-feed for 4-6 months. There were no differences in the level of education, the family size and the source of information about breast-feeding in planning to breast-feed (P>0.05). The main reasons for not choosing to breast-feed were returns to work(41.3%), previous failures of breast-feeding(17.4%), concerns about insufficient amount of breast milk(10.9%), breast and nipple problems(10.3%) and maternal illness(9.4%). The average score on the test of the understanding about breast-feeding was 59.7/100. The average scores on the understanding about the methods and advantages of breast-feeding were 45.3/100 and 86.1/100, respectively. The maternal status of employment, previous history of breast-feeding, the time of decision to breastfeed, person advocating breast-feeding and the understanding on the advantages of breast-feeding were significant determinant factors in planning to breast-feed(P<0.05). Conclusion : Pediatricians should take steps to make an effort to increase the breast-feeding rate and to encourage breast-feeding by timely education. Beyond the medical field, political and social supports for breast-feeding are urgently needed.