• Bulletin of the Korean Chemical Society
• /
• 제34권4호
• /
• pp.1153-1159
• /
• 2013

A novel solid-contact indium(III)-selective sensor based on bis-(1H-benzimidazole-5-methoxy-2-[(4-methoxy-3, 5-dimethyl-1-pyridinyl) 2-methyl]) thiosulfinate, known as an omeprazole dimer (OD) and a neutral ionophore, was constructed, and its performance characteristics were evaluated. The sensor was prepared by applying a membrane cocktail containing the ionophore to a graphite rod pre-coated with polyethylene dioxythiophene (PEDOT) conducting polymer as the ion-to-electron transducer. The membrane contained 3.6% OD, 2.3% oleic acid (OA) and 62% dioctyl phthalate (DOP) as the solvent mediator in PVC and produced a good potentiometric response to indium(III) ions with a Nernstian slope of 19.09 mV/decade. The constructed sensor possessed a linear concentration range from $3{\times}10^{-7}$ to $1{\times}10^{-2}$ M and a lower detection limit (LDL) of $1{\times}10^{-7}$ M indium(III) over a pH range of 4.0-7.0. It also displayed a fast response time and good selectivity for indium(III) over several other ions. The sensor can be used for longer than three months without any considerable divergence in potential. The sensor was utilized for direct and flow injection potentiometric (FIP) determination of indium(III) in alloys. The parameters that control the flow injection method were optimized. Indium(III) was quantitatively recovered, and the results agreed with those obtained using atomic absorption spectrophotometry, as confirmed by the f and t values. The sensor was also utilized as an indicator electrode for the potentiometric titration of fluoride in the presence of chloride, bromide, iodide and thiocyanate ions using indium(III) nitrate as the titrant.

• Corrosion Science and Technology
• /
• 제14권5호
• /
• pp.239-246
• /
• 2015

Stainless steel is generally known to have characteristics of excellent corrosion resistance and durability, but in a marine environment it can suffer from localized corrosion due to the breakdown of passivity film due to chloride ion in seawater. Furthermore, the damage behaviors are sped up under a cavitation environment because of complex damage from electrochemical corrosion and cavitation-erosion. In this study the characteristics of electrochemical corrosion and cavitation erosion behavior were evaluated on 16.7Cr-10Ni-2Mo stainless steel under a cavitation environment in natural seawater. The electrochemical experiments have been conducted at both static conditions and dynamic conditions inducing cavitation with different current density parameters. The surface morphology and damage behaviors were compared after the experiment. After the cavitation test with time variables morphological examinations on damaged specimens were analyzed by using a scanning electron microscope and a 3D microscope. the galvanostatic experiment gave a cleaner surface morphology presented with less damage depth at high current density regions. It is due to the effect of water cavitation peening under the cavitation condition. In the cavitation experiment, with amplitude of $30{\mu}m$ and seawater temperature of $25^{\circ}C$, weight loss and cavitation-erosion damage depth were dramatically increased after 5 hours inducing cavitation.

• Journal of Microbiology and Biotechnology
• /
• 제23권7호
• /
• pp.942-952
• /
• 2013

Monoliths are functional porous materials with a three-dimensional continuous interconnected pore structure in a single piece. A monolith with uniform shape based on poly(${\gamma}$-glutamic acid) (PGA) has been prepared via a thermally induced phase separation technique using a mixture of dimethyl sulfoxide, water, and ethanol as solvent. The morphology of the obtained monolith was observed by scanning electron microscopy and the surface area of the monolith was evaluated by the Brunauer Emmett Teller method. The effects of fabrication parameters such as the concentration and molecular mass of PGA and the solvent composition have been systematically investigated. The PGA monolith was cross-linked with hexamethylene diisocyanate to produce the water-insoluble monolith. The addition of sodium chloride to the phase separation solvent affected the properties of the cross-linked monolith. The swelling ratio of the cross-linked monolith toward aqueous solutions depended on the buffer pH as well as the monolith fabrication condition. Copper(II) ion was efficiently adsorbed on the cross-linked PGA monolith, and the obtained copper-immobilized monolith showed strong antibacterial activity for Escherichia coli. By combination of the characteristic properties of PGA (e.g., high biocompatibility and biodegradability) and the unique features of monoliths (e.g., through-pore structure, large surface area, and high porosity with small pore size), the PGA monolith possesses large potentials for various industrial applications in the biomedical, environmental, analytical, and separation fields.

• 한국응용과학기술학회지
• /
• 제31권1호
• /
• pp.92-100
• /
• 2014

비이온계면활성제 가운데 솔비톨계 계면활성제인 Span을 이용해 수열합성법으로 수산화마그네슘을 합성하였다. 수산화마그네슘 합성의 전구체는 염화마그네슘과 수산화나트륨을 사용하였다. 비이온 계면활성제는 안정제와 분산제 그리고 표면 개질제로 적용하였다. 비이온 계면활성제를 첨가하였을 경우 수산화마그네슘 입자는 좀 더 작고 균일한 크기와 좋은 분산성을 나타내었으며, 소수성 성질을 나타내었다. 합성된 입자의 특성은 PSA, SEM, EDS, XRD 그리고 FT-IR을 통해 확인하였다. 기기 분석을 통해 개질 전과 후의 수산화마그네슘의 소수성, 분산성 특성을 비교하였다. 또한 실험조건에 따라 수산화마그네슘 입자의 표면 개질 특성 변화를 확인하였다.

• 동아시아식생활학회지
• /
• 제26권4호
• /
• pp.314-324
• /
• 2016

To improve the color stability of chlorophyll in young barley leaf used as functional green biomaterial, the absorption spectrum, color values, and antioxidative activities of young barley leaf (YBL) treated with zinc ion solutions were investigated. The small pieces of fresh YBL in aqueous solution mixtures were autoclaved twice at $110^{\circ}C$ for 30 min (pH 5). Distilled water (BLA), 0.01% zinc chloride (BLAZ), 0.01% zinc citrate (BLAC), and 0.01% zinc lactate (BLAL) solutions were used. Treated YBL powders were extracted with 80% EtOH for 4 h. Chlorophyll a and b contents differed with different treatments. BLA decreased chlorophyll a and b contents, whereas others were maintained. Absorbance spectrums of chlorophyll at 400~700 nm showed different maximum peak wavelengths. After heating in acidic and neutral solutions (pH 3, 5, and 7), the colors of YBL and BLA changed from green to olive green, whereas BLAZ, BLAC, and BLAL remained green color. The antioxidative activities showed higher values in YBL extract than in treated extracts. From the above results, autoclaved YBL in zinc solution would increase the color stability and maintain green color regardless of acid and heat treatments.

• 대한화학회지
• /
• 제47권2호
• /
• pp.109-114
• /
• 2003

trans-$[CrX_2([15]aneN_4)]ClO_4 ([15]aneN_4=1,4,8,12-tetraazacyclopentadecane; X=F, Cl)$의 전자흡수 스펙트럼을 리간드장 이론으로 해석하였다. AOMX 프로그램을 사용하여 관측한 스핀허용 전이와 계산값을 최적화시켰다. 결정한 CFT 파라미터를 AOM, NSH 및 여러 가지 다른 파라미터와 관련시켜 구하고, 이를 화학적 견지에서 논의하였다. 리간드장 해석으로부터 이들 착물에서는 F 리간드가 강한${\sigma}-$ 및 ${\pi}-$주개인 반면에 Cl 원자는 Cr(III) 이온에 약한 ${\sigma}-$ 및 ${\pi}-$주개 성질이 있음을 확인할 수 있었다.

• 자원리싸이클링
• /
• 제16권6호
• /
• pp.20-27
• /
• 2007

순환골재를 콘크리트용 골재로 활용하기 위한 연구의 일환으로 2종류의 순환골재를 천연골재 중량의 0, 25, 50, 75 및 100%의 5단계로 혼입한 시멘트 경화체를 제조한 후 시멘트 경화체의 내구 특성을 평가한 결과, 골재의 특성에 따라서 시멘트 경화체의 성능이 상이하게 나타나는 것으로 확인되었다. RAB의 경우 RAA에 비하여 부착 모르타르 및 흡수율이 작아서 혼입율 50%까지는 모든 시험 항목에서 천연골재와 거의 유사하거나 약간 작은 값을 나타내었으며, 향후 순환골재를 콘크리트 구조용 골재로 사용하기 위해서는 순환골재에 부착된 모르타르량을 최대한 제거하고, 천연골재에 25%까지 혼입하여 사용해도 무관할 것으로 판단된다.

• 한국건축시공학회지
• /
• 제8권3호
• /
• pp.93-99
• /
• 2008

The purpose of this study is to evaluate the bond strength and corrosion resistance of coated reinforcing bar using hybrid-type polymer cement slurry(PCS). PCS coated steels, which is made from two types of polymer dispersions such as St/BA and EVA are prepared, and tested for bond strength and various corrosion resistances such as autoclaved cure, carbonation and H2SO4 solution. From the test results, the bond strength of PCS coated reinforcing bar using ordinary portland cement at 1-5, 2-1 and 4-5 of mixes is higher than that of uncoated regular steel. However, bond strength of almost PCS coated reinforcing bars using ultra rapid high strength cement is higher than that of epoxy coated bar, is also in ranges of 102% to 123% compared to that of uncoated regular steel. In autoclaved accelerating test, the ratio of corrosion of uncoated regular steel is increased with the increase in NaCl content, but the corrosion of PCS coated steel was very small. In the acceleration test for carbonation, increasing the amount of NaCl the corrosion of coated steel did not produce. The corrosion of uncoated regular steel is increased with the increase in the amount of NaCl. It can be seen that the NaCl following the acceleration test for carbonation can lower the corrosion resistance of concrete. As a result, the corrosion of steel largely is affected by the acceleration curing, chloride ion penetration and carbonation and shown more severe corrosion by applying complex factors. These corrosions of steel can be suppressed by the coating of PCS.

• Bulletin of the Korean Chemical Society
• /
• 제30권11호
• /
• pp.2707-2712
• /
• 2009

5-$HT_{3}$ receptor;5-$HT_{3A}$ receptor channel activity;Novel 5-$HT_{3}$ receptor channel current blockers;Chlorophenyl substituted piperazinylethylaminomethylpyrazoles; The 5-$HT_{3A}$ receptors are one of ligand-gated ion channels and are known to be involved in visceral pain, anxiety, or anticancer agent-induced nausea and vomiting. In present study, we designed novel skeletons based on the developed 5-$HT_{3}$ receptor antagonists and evaluated their effects on 5-$HT_{3A}$ receptor channel currents ($I_{5-HT}$) of a series of pyrazole derivatives having N-chlorophenylpiperazine functionality (6-9). We found that most of N-p-chlorophenyl substituted piperazinyl-pyrazole derivatives (7b, 7c, 7e and 7h) exhibited the high potency for the inhibition of $I_{5-HT}$, whereas the compound without chloride (6) or with m-chlorophenyl group (a serious of 8 and 9) showed the low potency. These result indicate that p-chlorophenyl group is might play an important role for increasing the inhibitory potency on $I_{5-HT}$.

• 폴리머
• /
• 제33권4호
• /
• pp.342-346
• /
• 2009

본 연구에서는 스티렌(styrene; St)과 부틸아크릴레이트(butyl acrylate; BA)를 단량체 비에 따라 합성 제조하고, 합성제조된 시멘트 혼화용 폴리머를 혼입한 폴리머 시멘트 모르타르의 물리적 성질과 내구성에 대한 특성을 보통 시멘트 모르타르와 기존에 생산되어 현장에 적용되고 있는 St/BA계 폴리머 시멘트 모르타르를 비교 분석하고자 하였다. 실험결과, St/BA의 단량체 비가 50:50, 60:40일 경우에는 시멘트 혼화용으로 사용하기에 가장 적합하였으며, 강도특성에서도 우수한 결과를 나타냈다. 또한, 방수성능과 염화물 이온에 대한 침투 저항성, 그리고 중성화 저항성도 St/BA의 단량체 비가 증가할수록, 폴리머 시멘트 비가 증가할수록 증진효과가 우수한 결과를 나타냈다. 따라서, 본 연구를 통해 합성제조된 St/BA 라텍스를 시멘트 모르타르에 혼입할 경우 우수한 성능개선 효과를 얻을 수 있었다.