DOI QR코드

DOI QR Code

A Solid-Contact Indium(III) Sensor based on a Thiosulfinate Ionophore Derived from Omeprazole

  • Abbas, Mohammad Nooredeen (Analytical Laboratory, Applied Organic Chemistry Dept., National Research Centre) ;
  • Amer, Hend Samy (Analytical Laboratory, Applied Organic Chemistry Dept., National Research Centre)
  • Received : 2012.10.25
  • Accepted : 2013.01.21
  • Published : 2013.04.20

Abstract

A novel solid-contact indium(III)-selective sensor based on bis-(1H-benzimidazole-5-methoxy-2-[(4-methoxy-3, 5-dimethyl-1-pyridinyl) 2-methyl]) thiosulfinate, known as an omeprazole dimer (OD) and a neutral ionophore, was constructed, and its performance characteristics were evaluated. The sensor was prepared by applying a membrane cocktail containing the ionophore to a graphite rod pre-coated with polyethylene dioxythiophene (PEDOT) conducting polymer as the ion-to-electron transducer. The membrane contained 3.6% OD, 2.3% oleic acid (OA) and 62% dioctyl phthalate (DOP) as the solvent mediator in PVC and produced a good potentiometric response to indium(III) ions with a Nernstian slope of 19.09 mV/decade. The constructed sensor possessed a linear concentration range from $3{\times}10^{-7}$ to $1{\times}10^{-2}$ M and a lower detection limit (LDL) of $1{\times}10^{-7}$ M indium(III) over a pH range of 4.0-7.0. It also displayed a fast response time and good selectivity for indium(III) over several other ions. The sensor can be used for longer than three months without any considerable divergence in potential. The sensor was utilized for direct and flow injection potentiometric (FIP) determination of indium(III) in alloys. The parameters that control the flow injection method were optimized. Indium(III) was quantitatively recovered, and the results agreed with those obtained using atomic absorption spectrophotometry, as confirmed by the f and t values. The sensor was also utilized as an indicator electrode for the potentiometric titration of fluoride in the presence of chloride, bromide, iodide and thiocyanate ions using indium(III) nitrate as the titrant.

Keywords

References

  1. Bakker, E.; Pretsch, E. TrAC 2008, 27, 612.
  2. Abbas, M. N.; Radwan, A. L. A.; Buhlmann, P.; Abd El Ghaffar, M. A. American Journal of Analytical Chemistry 2011, 2, 739. https://doi.org/10.4236/ajac.2011.27085
  3. Johnson, R. D.; Bachas, L. G. Anal. Bioanal. Chem. 2003, 376,328.
  4. Otazo-Sanchez, E.; Perez-Marin, L.; Estevez-Hernandez, O.; Rojas- Lima, S.; Alonso-Chamarro, J. J. Chem. Soc. Perkin Trans 2001,2, 2211.
  5. Benkeblia, N.; Lanzotti, V. Global Science Books 2007, 1, 193.
  6. Stellenboom, N.; Hunter, R.; Caira, R. M.; Bourne, A. S.; Cele, K.; Qwebani, T.; Le Roex, T. Arkivoc 2007, 9, 53.
  7. Ganjali, M. R. et al. Electroanalysis 2003, 15, 1038. https://doi.org/10.1002/elan.200390125
  8. Mathew, M.; Das Gupta, V.; Bailey, R. E. Drug Dev. Ind. Pharm.1995, 21, 965. https://doi.org/10.3109/03639049509026660
  9. Ekpe, A.; Jacobsen, T. Drug Dev. Ind. Pharm. 1999, 25, 1057. https://doi.org/10.1081/DDC-100102270
  10. Qaisi, A. M.; Tutunji, M. F.; Tutunji, L. F. J. Pharm. Sci. 2006, 95,384. https://doi.org/10.1002/jps.20546
  11. Tutunji, M. F.; Qaisi, A.; El-Eswed, M. B. I.; Tutunji, L. F. J. Pharm. Sci. 2007, 96, 196. https://doi.org/10.1002/jps.20588
  12. Schwarz-Schampera, U.; Herzig, P. M. Springer, Heidelberg 2002,167.
  13. Heather Hasan; understanding the elements of the periodic table: The Boron Elements: Boron, Aluminum, Gallium, Indium, Thallium; The Rosen publishing group Inc.: New York, 2010; p 25.
  14. Martínez, A. N. C.; Barrera, A. B.; Bermejo, B. P. Talanta 2005,66, 646. https://doi.org/10.1016/j.talanta.2004.12.002
  15. Charalambous, A.; Economou, A. Anal. Chim. Acta 2005, 547,53. https://doi.org/10.1016/j.aca.2004.12.048
  16. Huseyinli, A. A.; Alieva, R.; Haciyeva, S.; Guray, T. J. Haz. Mat. 2009, 163, 1001. https://doi.org/10.1016/j.jhazmat.2008.07.055
  17. Uehara, N.; Jinno, K.; Hashimoto, M.; Shijo, Y. J. Chromatog. A 1997, 789, 395. https://doi.org/10.1016/S0021-9673(97)00823-6
  18. Cunxiong, L.; Jing-Guo, H. Talanta 1997, 44, 729. https://doi.org/10.1016/S0039-9140(96)02015-2
  19. Abdulla, N. I.; Al-haider, A. M.; Al-joboury, M. I.; Nassory, N. S. Turk. J. Chem. 2005, 29, 687.
  20. Gupta, K. V.; Hamdana, A. J.; Palb, K. M. Talanta 2010, 82, 44. https://doi.org/10.1016/j.talanta.2010.03.055
  21. Bobacka, J. Anal. Chem. 1999, 71, 4932. https://doi.org/10.1021/ac990497z
  22. Gehad, M. J. Coord. Chem. 2009, 62, 645. https://doi.org/10.1080/00958970802244992
  23. Yang, X.; Kumar, N.; Chi, H.; Hibbert, D. B.; Alexander, P. W. Electroanalysis 1997, 9, 549. https://doi.org/10.1002/elan.1140090709
  24. Cobben, P. L. H. M.; Egberink, R. J. M.; Bomer, J. G.; Bergveld, P.; Reinhoudt, D. N. J. Electroanal. Chem. 1994, 368, 193. https://doi.org/10.1016/0022-0728(93)03114-5
  25. Ammann, D.; Pretsch, E.; Simon, W.; Lindler, E.; Bezegh, A.; Pungor, E. Anal. Chim. Acta 1985, 17, 119.
  26. Bakker, E.; Pretsch, E. Anal. Chim. Acta 1995, 309, 7. https://doi.org/10.1016/0003-2670(95)00077-D
  27. Ganjali, M. R.; Golmohammadi, M.; Yousefi, M.; Norouzi, P.; Salvati-Niasari, M.; Javanbakht, M. Anal. Sci. 2003, 19, 223. https://doi.org/10.2116/analsci.19.223
  28. Umezawa, Y.; Umezawa, K.; Sato, H. Pure Appl. Chem. 1995, 67,507. https://doi.org/10.1351/pac199567030507
  29. Vázquez, M.; Bobacka, J.; Ivaska, A.; Lewenstam, A. Sensors and Actuators B: Chemical 2002, 82, 7. https://doi.org/10.1016/S0925-4005(01)00983-2
  30. Vázquez, M.; Danielsson, P.; Bobacka, J.; Lewenstam, A.; Ivaska, A. Sensors and Actuators B: Chemical 2004, 97, 182. https://doi.org/10.1016/j.snb.2003.08.010
  31. Umezawa, Y.; Buhlmann, P.; Umezawa, K.; Tohida, K.; Amemiya, S. Pure Appl. Chem. 2000, 72, 1851. https://doi.org/10.1351/pac200072101851
  32. Tuck, D. G. Pure and Appl. Chem. 1983, 55, 1477. https://doi.org/10.1351/pac198355091477

Cited by

  1. Selective phosphate sensing using copper monoamino-phthalocyanine functionalized acrylate polymer-based solid-state electrode for FIA of environmental waters vol.20, pp.6, 2016, https://doi.org/10.1007/s10008-016-3165-z
  2. Highly sensitive and selective solid-contact calcium sensor based on Schiff base of benzil with 3-aminosalycilic acid covalently attached to polyacrylic acid amide for health care vol.22, pp.1, 2018, https://doi.org/10.1007/s10008-017-3727-8