• Journal of the Korean Ceramic Society
• /
• v.26 no.5
• /
• pp.601-608
• /
• 1989

Electrical properties of ZrF4-based heavy metla fluoride glasses were measured by the ac complex impedance method. The effects of alkali and chloride ions addition into fluoro zirconate glasses on the electrical conductivity were examined. The electrical conductivities of fluoride glasses show Arrhenian behavior in the temperature range of the experiment and were decreased by the addition of sodium fluoride up to 15mol%. Mixed alkali substitution resulted in conductivity minimum at intermediate composition which is commonly observed as mixed alkali effect' in alkali oxide glasses. Chloride ion substituted for fluoride ion was found to lower the conductivity.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.433-434
• /
• 2009

We evaluated the durabillity of the antibiotic concrete by the compressive strength and the chloride ion diffusion coefficients. It would be given as a conclusion that the antibiotics has an influence upon the concrete to increase the strength and decrese the rates of the chloride ion movements.

• Korean Journal of Metals and Materials
• /
• v.46 no.1
• /
• pp.20-25
• /
• 2008

The ionic equilibira in mixed solutions of cuprous and cupric chloride were analyzed by considering chemical equilibria, mass and charge balance equations. The activity coefficients of solutes were calculated by using Bromley equation. Required thermodynamic constants and interaction parameters were evaluated from the data reported in the literature. The effect of NaCl and CuCl concentrations on the pH and potential of the mixed solutions was explained in terms of the variation in the concentration of solutes and in the activity of hydrogen ion. The calculated pH values of the mixed solutions agreed well with the measured values. However, the calculated values for the potential of the mixed solutions were lower than the measured values, indicating the necessity of considering the complex formation between cuprous and chloride ion, such as $Cu^2Cl{_4}^{2-}$ and $Cu_3Cl{_6}^{3-}$.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.11a
• /
• pp.203-204
• /
• 2023

Recycled aggregate is an aggregate that satisfies the quality as an aggregate by crushing waste concrete and passing it through a separator. The government grants a floor area ratio of up to 15% and building height mitigation when more than 25% of the recycled building materials are used. In addition to environmental protection issues, it is necessary to actively utilize recycled aggregates that meet the standards to secure the business feasibility of buildings. This study attempted to derive the results according to the substitution rate by measuring the chloride ion diffusion characteristics based on the electrophoresis method.

• Corrosion Science and Technology
• /
• v.22 no.3
• /
• pp.201-213
• /
• 2023

Corrosion management of an aircraft and its engine relies on rinsing and cleaning using tap water. Few studies have reported effects of tap water species on corrosion behaviors of structural materials. In this study, a series of experiments were conducted based on the design of experiment. Solutions with different levels of chloride and sulfate ions were prepared using a full factorial design. Two structural materials (aluminum alloy and steel) were used for an alternate immersion test. Weight loss was then measured. In addition, a silver specimen was utilized as a sensor for chloride deposition measurement. The silver specimen was examined using the electrochemical reduction method, XPS, and SEM-EDS. Surface analysis revealed that levels of chloride and sulfate ions were sufficient for the formation of silver chloride and silver surface. Statistical analysis of weight loss and chloride deposition rate showed significant differences in measured values. Concentration of chloride ions greatly affected corrosion behaviors of structural materials. Sulfate ion hindered the adsorption reaction. These results emphasize the importance of controlling ion concentration of tap water used for cleaning and rinsing an aircraft.

• Journal of the Korea Institute of Building Construction
• /
• v.5 no.2 s.16
• /
• pp.89-95
• /
• 2005

Various tests are performed with the recycled concrete including compressive strength, flexural strength, splitting tensile strength, bonding strength and chloride ion penetration test. The basic data obtained from the presented test could be accumulated for the purpose of utilization in concrete structure. Most of the strength tests show that strength decrease a little extent with increasing substitution ratio of recycled coarse aggregate except splitting tensile test for the concrete with $100\%$ recycled fine aggregate. But in case of the $50\%$ substitution of recycled coarse aggregate, compressive strength, flexural strength and bonding strength are almost equal to the normal concrete. Chloride ion penetration test shows that the penetration amounts of chloride ion becomes more in proportion to the substitution ratio of recycled aggregate. But most of the results show that the permeability of recycled concrete is proper to use. The results of present study nay imply that the use of recycled aggregate for steam curing concrete is possible but the substitution ratio of recycled aggregate should be determined through further studies.

• Journal of the Korea Concrete Institute
• /
• v.11 no.4
• /
• pp.31-41
• /
• 1999

Blended Low Heat type cement is ground granulated blast furnace slag and fly ash mixed ternary with ordinary portland cement. From the viewpoint of X-ray patterns of domestic LHC, the main components of cement such as $C_2$S, $C_3$A, $C_3$S are considerably reduced. Therefore the heat evolution of LHC paste is 42cal/g lower than of OPC paste. At early age, the compressive strength development of LHC concrete is delayed, but the slump loss ratio of fresh concrete is reduced more than 20% with elapsed time. The penetrability of LHC is lower than that of OPC by 1/7.8 with the penetrability of chloride ion into the concrete until the age of 120 days. And the PD Index value of LHC is 0.44$\times$10-6 $\textrm{cm}^2$/s, which indicates only 39.3% of OPC. From the Mercury Intrusion Porosimetry test of cement past, we know that the pore size of LHC is more dense than that of OPC by production of C-S-H.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.949-952
• /
• 2008

The latex modified concrete(LMC) was adds latex in the plain concrete as the latex has increase the durability of concrete. But it is added in LMC manufacture, which is a high price compares with different material and there is a weak point where the construction expense is very high. So, this study are decided mix proportion from the scope where the security strong point of LMC is possible and reduced the material expense by control the latex contents. and these mix proportions are estimated the chloride ion diffusion. The results of study appear that it can reduced the latex content until the $5{\sim}10$% of cements, and these mixtures are very low chloride ion diffusion.

• Resources Recycling
• /
• v.27 no.2
• /
• pp.48-54
• /
• 2018

Batch ion exchange experiments of Au(III) were performed from ammonium chloride solution by employing strong anionic exchange resins (Amberlite IRA 402 and AG 1-X8). Au(III) was well loaded into the two resins and the loading behavior of Au(III) into AG 1-X8 was superior to that into Amberlite IRA 402. The loading of Au(III) into AG 1-X8 followed Langmuir adsorption isotherm and the experimentally determined loading capacity was 355 mg/g. Au(III) was successfully eluted by $HClO_4$ from the loaded AG 1-X8 and the elution percentage of Au(III) increased with the concentration of $HClO_4$.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.10
• /
• pp.1484-1488
• /
• 2004

The thiocyanate-selective PVC membrane electrodes based on 5,10,15,20-tetrakis(2,4,6-trimethylphenyl)-porphyrinatomanganese(III) chloride [Mn(TMP)Cl] and 5,10,15,20-tetrakis(2,6-dichlorophenyl)porphyrinatomanganese(III) chloride $[Mn(Cl_8TPP)Cl]$ as ion carriers were investigated. The effect of ionophores, membrane compositions, plasticizers, and solution pHs on the response characteristics were studied. The Mn(TMP)Cl as an ionophore shows the best potentiometric sensitivity with a slope of -58.7 mV/decade and a detection limit of $log[SCN^-]$ = -6.90, and selectivity for thiocyanate over strong hydrophobic interfering anions such as ${ClO_4}^-$ and salicylate. The potentiometric response is affected by the electronic effect of the substituents and solution pHs. The presence of substituents with electron donating and more liphophilic characters around the ligated metal center produces an improved response toward $SCN^-$.