• Membrane Journal
• /
• v.31 no.4
• /
• pp.253-261
• /
• 2021

Solutions to water pollution, global warming, and climate change have been currently discussed. Pressure retarded osmosis (PRO) using a difference in salt concentration between two fluids is proposed to meet the demand for clean water and produce eco-friendly energy. Although PRO has been researched continuously, it has not been commercialized yet due to limitations such as lack of technology and the high price of membranes. Meanwhile, the membrane is one of the most significant parts of the PRO engine and salinity gradient power (SGP) technology. Research continues to technologically develop graphene oxide membranes and nanocomposite membranes used in salinity gradient power generation. Studies on efficient membranes, solvents, and solutes are active to enable high energy efficiency of the osmotic heat engine even at low temperatures of waste. Studies have been conducted on reducing internal concentration polarization and increasing power density by using membranes with balanced permeability and selectivity. In this review, dealing with these studies, we discuss the types of PRO membranes, theoretical modeling of technologies through efficient membranes, and other technologies to develop the process efficiency.

• Journal of the Korean Geosynthetics Society
• /
• v.18 no.3
• /
• pp.33-44
• /
• 2019

Clinker layer is a stratum structure distributed in volcanic area such as Jeju Island. The clinker layers were formed in between the repetitive action of eruption and solidification of lava flows. Since the clinker layer contains a large amount of voids accompanied by the lava gas ejection process, there is a possibility of inducing overall stability of the ground due to the low stiffness and strength of the clinker layer. Therefore, in this study, site investigation was carried out at both ends of the 00 bridge where the clinker layers exist. And, based on the ground survey results, the behavior of shallow foundations was analyzed numerically. In addition, the improved shallow foundation behavior in grouting substitution using the chemical injection method of the clinker layer was compared with the shallow foundation behavior in the ground, and the grouting substitution efficiency of each layer was analyzed. As a result, the bearing capacity, the replacement efficiency and elastic settlement were different according to the presence or absence of the sediment layer. This is because the sediment layer has a lower stiffness and density than the clinker layer.

• Journal of Navigation and Port Research
• /
• v.44 no.6
• /
• pp.550-556
• /
• 2020

Over the past years, the role of ports in the global network of supply chains has becoming increasingly important, not merely as a physical location for loading and unloading goods, but also as an essential center of economic activity where additional value is added to cargo. Due to the overall growing importance of ports, each country has chosen to adopt hub growth as a primary economic strategy. Northeast Asia in particular, due to its high population density, experiences intense competition between its ports. Busan's port, as a result, has used the establishment of Distripark in order to attract high and stable trade volume, and compete more effectively with other ports in the region. This study estimates the unit cost of the logistic process for the all principal cargos handled at Busan New Port, with the findings revealing that unit cost increases gradually starting with chemical products, LME bulk goods, automobile parts, LME containers, general cargoes, and LME inland transportation goods coming in last. Future research will look more closely at all all categories of cargo handled in the Distrpark of Busan New Port, thereby enabling us to better understand the value created by the port, and how to best implement effective trade volume-attraction strategy.

• Journal of Korean Medicine for Obesity Research
• /
• v.20 no.2
• /
• pp.69-77
• /
• 2020

Objectives: In this study, we investigated the antiobesity and antidiabetic effects of polyherbal extract, DM2 consisting of Atractylodis Rhizoma, Anemarrhenae Rhizoma, Cinnamomi Cortex, and Moutan Radicles Cortex in high fat diet-induced obesity mice. Methods: DM2 extract was prepared with a hot water. Six-week-old male C57BL/6N mice were fed a high-fat diet (HFD) for 8 weeks and then administrated with DM2 extract (500 mg/kg, p.o.) for 4 weeks. The changes of physiological markers, body weight (BW), food and water intakes, and the levels of fasting blood glucose (FBG) were measured once a week for 4 weeks in mice. The the serum levels of glucose, insulin, aspartate aminotransferase (AST), alanine aminotransferase (ALT), total cholesterol (T-CHO), triglyceride, and low density lipoprotein cholesterol in sera were measured in mice using autometic chemical analyzer and enzyme linked immunosorbant assay. We also observed the histological changes of liver and pancreatic tissues with Hematoxylin & Eosin staining. Results: In physiological change, the increases of BW, calorie intake, and FBG in HFD-induced obese mice were significantly decreased after administration of DM2 extract for 4 weeks. The decrease of water intake was significantly increased in DM2 extract-administrated mice. In serological change, the administration of DM2 extract in obesity mice was significantly decreased the serum levels of glucose, insulin, T-CHO, AST, and ALT levels. We also found that DM2 extract inhibited the increase of lipid droplets in liver and the structural destruction of pancreatic tissues in obesity mice. Conclusion: Our study demonstrated that DM2 extract has antiobesity antidiabetic effects with body weight loss, decrease of glucose and insulin levels, and lipid accumulation on liver tissue.

• New Physics: Sae Mulli
• /
• v.68 no.12
• /
• pp.1315-1323
• /
• 2018

We studied the carbonization due to the annealing condition of waste coffee powder for application as an active anode material for lithium-ion batteries (LIBs). The coffee powder used as an active anode material for LIBs was obtained from coffee beans, not from a coffee shells. The waste coffee powder was dried in air and heat-treated in an $Ar/H_2$ atmosphere to obtain a pore-forming activated carbon powder. The specific capacity of the sample annealed at $700^{\circ}C$ was still 303 mAh/g after 1000 cycles at a current density of 1000 mA/g and with a coulombic efficiency of over 99.5%. The number of pores and the pore size of the waste coffee powder were increased due to chemical treatment with KOH, which had the some effect as an increased specific surface area. The waste coffee powder is considered to be a very promising active anode material because of both its excellent electrochemical properties due to enhanced carrier conduction and its being a cost effective resource for use in LIBs.

• Clean Technology
• /
• v.26 no.4
• /
• pp.270-278
• /
• 2020

Palladium (Pd) has been widely used in various industrial applications such as jewelry, catalyst, and dental materials despite its limited resources. It has been gaining attention to recover Pd with high purity from the spent materials. This study investigated the optimum conditions for the leaching and recovery of metallic Pd. The leaching parameters are HCl concentration, temperature, time, concentration of oxidants, and pulp density. 97.2% of Pd leaching efficiency was obtained in 3 M HCl with 3 vol% oxidants at 80℃ for 60 min. The ratio of hydrogen peroxide to sodium hypochlorite played a critical role in the leaching efficiency due to the supply of Cl- ions in the leachate. Moreover, the complete recovery of Pd in the leachate was achieved at 80℃ with 0.3 formic acid/leachate after adjusting the pH value of 7. This situation was ascribed to the decomposition of formic acid into hydrogen gas and carbon dioxide at 80℃. ICP-AES and XRD characterized the recovered Pd powder, and the purity of the recovered powder was found to be 99.6%. Consequently, the recovered Pd powder with high purity could be used in circuits, catalyst precursors, and surgical instruments.

• Korean Journal of Optics and Photonics
• /
• v.33 no.5
• /
• pp.218-229
• /
• 2022

We have investigated reliable inspection methods for finding the defects generated during the manufacturing process of lightweight, large-aperture satellite telescope mirrors using silicon carbide, and we have measured the basic physical properties of the mirrors. We applied the advanced ceramic material (ACM) method, a combined method using liquid-silicon penetration sintering and chemical vapor deposition for the carbon molded body, to manufacture four SiC mirrors of different sizes and shapes. We have provided the defect standards for the reflectors systematically by classifying the defects according to the size and shape of the mirrors, and have suggested effective nondestructive methods for mirror surface inspection and internal defect detection. In addition, we have analyzed the measurements of 14 physical parameters (including density, modulus of elasticity, specific heat, and heat-transfer coefficient) that are required to design the mirrors and to predict the mechanical and thermal stability of the final products. In particular, we have studied the detailed measurement methods and results for the elastic modulus, thermal expansion coefficient, and flexural strength to improve the reliability of mechanical property tests.

• Journal of Mushroom
• /
• v.20 no.4
• /
• pp.270-273
• /
• 2022

The present study investigated the optimum additive ratio of wheat straw pellet as a substitute for beet pulp during oyster mushroom cultivation. The chemical properties across treatments were pH of 4.8-5.5, total carbon content of 45.9-46.5%, total nitrogen content of 1.5-1.7%, and carbon-to-nitrogen ratio of 27.8-31.0. Mycelial growth was the fastest in a medium containing 20% wheat straw pellet (at 88.2 mm in 'Heuktari' and 70.3-79.6 mm in 'Suhan-1Ho'); however, there were no significant differences in mycelial density among the treatments. The characteristics of fruiting bodies by variety were as follows. In 'Heuktari', the valid stipe number per bottle (1,100 cc) was 22.5 and yield was 177.1 g/1,100 cc in the mixed medium containing 10% wheat straw pellet, with the values being comparable to those of controls. In 'Suhan-1Ho', the valid stipe number per bottle (1,100 cc) was 14.0 and yield was 151.2 g/1,100 cc in the mixed medium containing 10% wheat straw pellet, with the values being comparable to those of controls.

• Journal of Bio-Environment Control
• /
• v.31 no.4
• /
• pp.292-299
• /
• 2022

This study was conducted to analyze physical and chemical properties of horticultural substrates and response of hydroponically grown two cultivars of 'Namcheon' and 'Somirang' perilla by four different substrates: coir (chip:dust = 5:5), perlite, granular rockwool, and commercial mixed substrate (cocopeat:peatmoss:vermiculite:perlite: zeolite = 50:25:10:10:5). There were no significant differences in EC and pH according to substrates. Container capacity was the greatest in granular rockwool, and it showed appropriate levels in mixed substrate and coir. Air space was higher in coir and perlite than the other treatments. Bulky density reached a proper standard in all substrates excepting coir. The leaf length and width of 'Namcheon' indicated the most in mixed substrate, though the value of 'Somirang'was greatest in coir substrate. The leaf weight of both cultivars was highest in mixed substrate, and relatively low in coir and perlite. The total yield of leaves was separated by two groups: higher group, which are mixed substrate and granular rockwool, and lower group, which are coir and perlite. There was a large gap by 28% between these two groups. Therefore, this study suggests that substrates with high water holding capacity such as mixed substrate or granular rockwool are most suitable for the hydroponic cultivation of perilla, which require sufficient moisture supply to the root zone.

• The Korean Journal of Zoology
• /
• v.22 no.3
• /
• pp.103-114
• /
• 1979

The authors observed the ultrastructure of the granular glands in the amphibian skin with an electron microscope. The specimens from the experimental animals (Bombina orientalis, Bufo bufo gargarizans, Rana nigromaculata and Rana rugosa) were fixed in 2.5% glutaraldehyde-paraformaldehyde fixative in phosphate buffer at pH 7.2 prior to fixation in 1% osmium tetroxide, dehydrated in graded ethanol and acetone, embedded in Epon 812 mixture, and sectioned with a LKB-ultramicrotome. the ultrathin sections were contrasted with uranyl acetate and lead citrate and observed with a JEOL-100B electron microscope. The results were as follws: 1. The granular gland in the amphibian skin consisted of the glandular epithelial and the myoepithelial cells. 2. The epithelial cells of the granular gland in the amphibian skin consisted of the dark cells but the light cells were also observed in that of Bombina orientalis. 3. The granular glands of the amphibian skin were in holocrine fashion. 4. The nuclei of the epithelial cells of the amphibian cutaneous granular glands were round or oval and showed small and large inforldings of nuclear envelope. Heterochromatins were mainly distributed near the nuclear envelope. Mitochondria were mainly distributed in the perinuclear portion and rough-surfaced endoplasmic reticulums were developed in the cytoplasm but smooth-surfaced endoplasmic reticulums were not well developed. 5. Secretory granules were round or oval and electron-dense and less electron-dense granules were observed. 6. The authors infer that the differences in electron density of the secretory granules in the granular glands of the amphibian skin are due to difference in the concentrations of secretory substances as related to the processes of its formation, and that those chemical components are identical.