• JSTS:Journal of Semiconductor Technology and Science
• /
• 제13권1호
• /
• pp.65-70
• /
• 2013

A 0.18-${\mu}m$ 3.3 V grounded-gate NMOS (GGNMOS) I/O cell array for timing controller (TCON) application is proposed for improving electrical overstress (EOS) robustness. The improved cell array consists of 20 GGNMOS, 4 inserted well taps, 2 end-well taps and shallow trench isolation (STI). Technology computer-aided design (TCAD) simulation results show that the inserted well taps and extended drain contact gate spacing (DCGS) is effective in preventing EOS failure, e.g. local burnout. Thermodynamic models for device simulation enable us to obtain lattice temperature distributions inside the cells. The peak value of the maximum lattice temperature in the improved GGNMOS cell array is lower than that in a conventional GGNMOS cell array. The inserted well taps also improve the uniformity of turn-on of GGNMOS cells. EOS test results show the validity of the simulation results on improvement of EOS robustness of the new GGNMOS I/O cell array.

• 한국항공우주학회지
• /
• 제31권1호
• /
• pp.67-72
• /
• 2003

본 논문에서는 다목적실용위성 1호의 태양전지를 모델링하고 해석하였다. 태양전지판의 모델링은 적은 수의 데이터만을 갖고 있으므로 비선형 시스템을 모델링하는 데 적합한 누럴 알고리즘을 사용하였다. 모델링 결과는 다목적실용위성 1호의 태양전지 셀 데이터를 고려한 태양전지판의 해석과 시뮬레이션에 의해 그 특성을 증명하였다. 또한, 태양전지판의 특성 및 전력발생 특성은 모델링 결과를 사용하여 해석하였다

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제4권3호
• /
• pp.222-227
• /
• 2004

The sub-bitline (SBL) sensing voltage of a cell and total cell array can be measured by the method of SBL voltage evaluation method. The MOSAID tester can collect all SBL signals. The hierarchical bitline of unit cell array block is composed of the cell array of 2k rows and 128 columns, which is divided into 32 cell array sections. The unit cell array section is composed of the cell array of 64 rows and 128 columns. The average sensing voltage with 2Pr value of $5{\mu}C/cm^2$ and SBL capacitance of 40fF is about 700mV at 3.0V operation voltage. That is high compensation method for capacitor size degradation effect. Thus allowed minimum 2Pr value for high density Ferroelectric RAM (FeRAM) can move down to about less than $5{\mu}C/cm^2$.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제3권4호
• /
• pp.205-210
• /
• 2003

A 3-Transistor cell CMOS OTP ROM array using standard CMOS antifuse (AF) based on permanent breakdown of MOSFET gate oxide is proposed, fabricated and characterized. The proposed 3-T OTP cell for ROM array is composed of an nMOS AF, a high voltage (HV) blocking nMOS, and cell access transistor, all compatible with standard CMOS technology. The experimental results show that the proposed structure can be a viable technology option as a high density OTP ROM array for modern digital as well as analog circuits.

• 대한두경부종양학회지
• /
• 제24권2호
• /
• pp.155-161
• /
• 2008

Head and neck squamous cell carcinoma(HNSCC) still has poor outcome, and laryngeal cancer is the most frequent subtype of HNSCC. Therefore, there is a need to develop novel treatments to improve the outcome of patients with HNSCC. It is critical to gain further understanding on the molecular and chromosomal alteration of HNSCC to identify novel therapeutic targets but genetic etiology of squamous cell carcinoma of the larynx is so complex that target genes have not yet been clearly identified. Array based CGH(array-CGH) allows investigation of general changes in target oncogenes and tumor suppressor genes, which should, in turn, lead to a better understanding of the cancer process. In this study, We used genomic wide array-CGH in tissue specimens to map genomic alterations found in laryngeal squamous cell carcinomas. As results, gains of MAP2, EPHA3, EVI1, LOC389174, NAALADL2, USP47, CTDP1, MASP1, AHRR, and KCNQ5, with losses of SRRM1L, ANKRD19, FLJ39303, ZNF141, DSCAM, GPR27, PROK2, ARPP-21, and B3GAT1 were observed frequently in laryngeal squamous cell carcinoma tissue specimens. These data about the patterns of genomic alterations could be a basic step for understanding more detailed genetic events in the carcinogenesis and also provide information for diagnosis and treatment in laryngeal squamous cell carcinoma. The high resolution of array-CGH combined with human genome database would give a chance to find out possible target genes which were gained or lost clones.

• Journal of Astronomy and Space Sciences
• /
• 제36권3호
• /
• pp.181-186
• /
• 2019

The attitude information of spacecraft can be obtained by the sensors attached to it using a star tracker, three-axis magnetometer, three-axis gyroscope, and a global positioning signal receiver. By using these sensors, the spacecraft can be maneuvered by actuators that generate torques. In particular, electromagnetic-torque bars can be used for attitude control and as a momentum-canceling instrument. The spacecraft momentum can be created by the current through the electrical circuits and coils. Thus, the current around the electromagnetic-torque bars is a critical factor for precisely controlling the spacecraft. In connection with these concerns, a solar-cell array can be considered to prevent generation of a magnetic dipole moment because the solar-cell array can introduce a large amount of current through the electrical wires. The maximum value of a magnetic dipole moment that cannot affect precise control is $0.25A{\cdot}m^2$, which takes into account the current that flows through the reaction-wheel assembly and the magnetic-torque current. In this study, we designed a 300-W solar cell array and presented an optimal wire-routing method to minimize the magnetic dipole moment for space applications. We verified our proposed method by simulation.

• Journal of Astronomy and Space Sciences
• /
• 제36권2호
• /
• pp.69-74
• /
• 2019

Spacecraft requires sufficient power in orbit to perform its mission. So as to comply with system requirements, the sufficient power should be made by a solar cell array by photovoltaic power conversion. A life time of space program depends on its mission considering parts reliability and parts grade. Based on the mission life time, power equipment might be designed to meet specifications. In outer space, solar cell array might generate the dc power by photovoltaic conversion effects and GaInP/GaAs/Ge solar cells are used in this study. Space programs that require more than five years should select parts for high reliability applications. Therefore, reliability analysis for high reliability applications should be performed to check its fulfilment of the requirements. This program should also require more five years for its mission and we performed its analysis using parts count method (PCM) for its reliability. Finally, we performed reliability analysis and obtained quantitative figures found out 99.9%. In this study, we presented the reliability analysis of the 300 W GaInP/GaAs/Ge solar cell array.

• 한국전자파학회논문지
• /
• 제13권8호
• /
• pp.783-789
• /
• 2002

본 논문은 V-band에서 동작하는 MMIC 결합 발진기 array에 관한 것이다. 제안된 발진기 array의 unit cell들은 한 개의 microstrip patch 안테나와 두개의 발진기가 결합된 push-pull 능동 안테나 구조로 되어 있다. 전체 발진기 array의 주파수 동기화는 각 unit cell의 microstrip patch 안테나 사이의 강한 전자기적 결합을 통해 이루어진다. 이로 인해 전체 array를 하나의 MMIC로 구현할 수 있었다. 제안된 구조로 설계된 2종의 V-band 1$\times$2 결합 발진기 array가 0.15 um pHEMT MMIC 표준 공정을 이용해 제작되었다. 제작된 MMIC 칩은 도파관을 이용한 전력 결합 module로 구현되었다. 모듈 측정 결과, 첫 번째 array는 56.372 GHz에서 0.5 dBm의 출력을 나타내었고 다른 하나는 60.147 GHz에서 5.85 dBm의 출력을 나타내었다.

• 태양에너지
• /
• 제19권4호
• /
• pp.63-69
• /
• 1999

The conventional grid connected PV(Photovoltaic) system has a unstable output pattern due to its dependence on the weather condition, although solar-cell array averagely has a regular output characteristics to have a peak output nearly at noon. Therefore assuming the high density grid connection in the future, this unstable output pattern can be one of the main reasons to generate power disturbance such as voltage variation, frequency variation and harmonic voltage generation in low voltage distribution line. However general grid connected solar-cell system do not have functions to cope with these disturbances. Therefore this study proposed a advanced type grid connected PV system with functions to suppress output power fluctuation due to solar-cell array output variation and showed the levelling effect of fluctuation due to instantaneous array output variation.

• Current Photovoltaic Research
• /
• 제2권4호
• /
• pp.189-194
• /
• 2014

In this paper, We have simulated the output variation of the PV arrays installation with position & angle change. The existing 3 solar array system are $43^{\circ}$ southeast and each of the mounting angle is $17^{\circ}$. The PV output power is 240 kW. The composite studied systems in this paper arrays altered 2 PV array among 3 PV array system- the output 144kW. We simulated this system using Solar Pro ver.4.1. The simulation conditions are southwest $43^{\circ}/array$, mount angle $27^{\circ}/array$. Because the southeast have shadow effect-higher mountain The purpose of southwest $43^{\circ}$ is reduce the shadow effect. The simulation results of the suggestion design algorithm compared to 1,590 kWh/year output is increased with the southeast.