• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.29 no.1
• /
• pp.59-70
• /
• 2011

The purpose of this study is to present raw data to systematically and rationally manage the protected trees located in Changwon-si, Korea. This study investigated about the present condition and the information of location, individual, management, health and soil. The results are as follows. The protected trees were located in 26 spots, and species of trees were 9 taxa; Zelkova serrata, Celtis sinensis, Aphananthe aspera, Ginkgo biloba, Carpinus tschonoskii, Pinus densiflora for. multicaulis, Quercus variabilis, Pinus densiflora and Salix glandulosa. In protected tree types, shade trees were the most, and the majority of theirs were 200 years or more in age. The range of altitude was 14~173m, and the number of trees located in flat fields was the most. For location types, village and field and mountain were presented in the order and, in land use, land for building was the most. The range of height was 8.0~30.0m, 0.6~5.1m in crown height, 240~700cm in diameter of breast and 210~800cm in diameter of root. In case of crown area, Zelkova serrata of No.5 was most large. The status boards were mostly installed except No.23 and No.26. The sites with fence were 9 spots, and the site with stonework were 14 spots. The sites with the support beam were 5 spots, and most sites were not covered up with soil. The materials of bottom were soil, gravel and vegetation in the order. The range of withering branch rate was 0~40%, and peeled bark rate was 0~60%. The sites made holes were 23 spots, and the hole size of Aphananthe aspera of No.12 was the largest. The sites disturbed by human trampling were 7 spots, the sites by disease and insects of 2 spots, the sites by injury of 23 spots and the sites by exposed roots of 13 spots. In the results of soil analysis, there showed that acidity was pH 4.5~8.0, organic matter content of 3.5~69.8g/kg, electrical conductivity(EC) of 0.11~2.87dS/m, available $P_2O_5$ of 3.0~490.6mg/kg, exchangeable K of 0.10~1.05cmol+/kg, exchangeable Ca of 1.41~16.45cmol+/kg, exchangeable Mg of 0.37~1.96cmol+/kg, exchangeable Na of 0.25~2.41cmol+/kg and cation exchange capacity(C.E.C) of 8.35~26.55cmol+/kg.

• Journal of Korean Home Economics Education Association
• /
• v.33 no.1
• /
• pp.101-127
• /
• 2021

The purpose of this study is to design and develop a teaching-learning process plan for process-based assessment, focusing on the unit related to life design in middle school home economics(HE: Home Economics part of 「Technology and Home Economics」), to propose a feedback plan after implementing it, and to evaluate the plan through participatory observation and interviews. The student reflection journals, teacher's class journals, participatory observation journals, interviews, and performance tasks, were collected and analyzed to provide foundational date to be utilized for feedback to students, and class improvement. The research results are as follows: First, the developed teaching-learning process plan consists of a total of 8 sessions, i.e. 2 sessions for each of the four learning themes, under the practical question of "What should I do to live the life I want?" The portfolio was composed of five evaluation topics and for evaluation, oral presentation, observational evaluation, self-assessment, and peer evaluation were considered. Second, during the class, feedback from teachers, feedback from fellow students, feedback through results, and a plan to record them were provided. Third, from the analysis of collected data including observation journals and interviews, it was apparent that the students recognized the necessity of process-based assessment after the class, and students acknowledged that through the process-based evaluation in which they are evaluated on the efforts they made and provided with feedbacks, they participated more in class, and it lead them to experience a sense of growth and a feeling that they took a step forward into their future. Teachers suggested that the class through feedback was suitable for the unit and the capacity of the class, but the difficulty they experienced in giving feedback was presented as a disadvantage. For the process-based assessment, follow-up research is needed on various ways to provide feedback on-line and off-line through changes in the perception of assessment.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.66 no.4
• /
• pp.279-288
• /
• 2021

Low-density transplanting is a cultivation technology that reduces labor and production costs. In this study, the growth and yield of several varieties with different tillering characteristics were analyzed in order to establish an appropriate planting density for low-density transplanting. Varieties with Low-Tillering (LT), Medium-Tillering (MT), and High-Tillering (HT) were planted at a density of 37-80 hills/3.3 m². As the planting density decreased, the number of tillers per hill increased, but the number of tillers per square meter of hill decreased, especially for the LT variety. Decreasing density extended the tillering stage, which was longest in the LT variety. As the planting density decreased, SPAD(Soil plant analysis development, chlorophyll meter) values just before heading increased while canopy light interception decreased. Such changes were much greater in the LT variety than in the MT and HT varieties. The heading date tended to be delayed by 0-2 days as the planting density decreased, and there was no difference in the length of the period from first heading to full heading. As the number of spikelets per panicle increased, the number of spikelets per square meter did not differ according to the planting density. Decreasing planting density did not affect the grain weight; nevertheless, the yield ultimately decreased because of the decreasing ripening rate. The optimal planting density for stable low-density transplanting cultivation was determined to be over 50 hills/3.3 m2. In addition, these results suggest that LT varieties should be avoided, since these showed large decreases in growth and yield with decreasing planting density.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.1
• /
• pp.111-132
• /
• 2022

The comprehensive examination on tendering system has been introduced to the Cultural Heritage repair and restoration field since 2016 to remedy the repair issues of South Gate in 2014. The Cultural Heritage Administration tried to attain the high performance of the cultural heritage repair and restoration works securing the proper payment for the repair and restoration works. It is high time to review the operating performance of the comprehensive examination on tendering system (hereinafter referred to as the "CEOTS"), as the system has been run for over 5 years to correspond with its original goal, i.e., "The Proper Payment in return for the High Performance of Repair and Restoration works." This study intends to analyze 114 tenders of CEOTS from 2016 to 2020. As a result of the analysis of 114 tenders, firstly, more than half of bid winners were in the top 20% of repair & restoration capacity disclosure amount list, which mostly fulfilled the goal of 'attaining high performance.' Secondly, as the winning bid rate is decreasing from 86.847% in 2017 to 85.488% in 2020, the goal of 'guarantee of a proper payment' is not achieved yet. Thirdly, the influence of Economic Evaluation section in CEOTS has been grown since the change of scoring system in CEOTS in 2019. This study identifies two reasons why the winning bid rate of CEOTS has decreased. Firstly, it is caused by the fact that 'the group that got more than 1st place' and 'the first place group' that are more than half of the total bidders have the decreasing bidding rate trend as the years go by. Secondly, the exclusion rate of 'the group that got more than 1st place' is higher than the exclusion rate of 'the group that got less than 1st place', which means the expected winning rate would be lowered. It is proposed that the revision of CEOTS code is needed, i.e. easing the strict rule concerning the exclusion rate as well as setting up the lower bidding limit to prevent the excessive decreasing winning bid rate.

• Economic and Environmental Geology
• /
• v.54 no.6
• /
• pp.689-698
• /
• 2021

Since the mine reclamation scheme was implemented from 2007 in Korea, various remediation programs have been decontaminated the pollution associated with mining and 254 mines were managed to reclamation from 2011 to 2015. However, as the total amount of contaminated mine drainage has been increased due to the discovery of potential hazards and contaminated zone, more efficient and economical treatment technology is required. Therefore, in this study, the adsorption properties of arsenic was evaluated according to the adsorbents which were derived from water treatment sludge(Alum based adsorbent, ABA-500) and granular ferric hydroxide(GFH), already commercialized. The alum sludge and GFH adsorbents consisted of aluminum, silica materials and amorphous iron hydroxide, respectively. The point of zero charge of ABA-500 and GFH were 5.27 and 6.72, respectively. The result of the analysis of BET revealed that the specific surface area of GFH(257 m²·g^-1) was larger than ABA-500(126~136 m²·g^-1) and all the adsorbents were mesoporous materials inferred from N₂ adsorption-desorption isotherm. The adsorption capacity of adsorbents was compared with the batch experiments that were performed at different reaction times, pH, temperature and initial concentrations of arsenic. As a result of kinetic study, it was confirmed that arsenic was adsorbed rapidly in the order of GFH, ABA-500(granule) and ABA-500(3mm). The adsorption kinetics were fitted to the pseudo-second-order kinetic model for all three adsorbents. The amount of adsorbed arsenic was increased with low pH and high temperature regardless of adsorbents. When the adsorbents reacted at different initial concentrations of arsenic in an hour, ABA-500(granule) and GFH could remove the arsenic below the standard of drinking water if the concentration was below 0.2 mg·g^-1 and 1 mg·g^-1, respectively. The results suggested that the ABA-500(granule), a low-cost adsorbent, had the potential to field application at low contaminated mine drainage.

• Journal of Korea Port Economic Association
• /
• v.38 no.1
• /
• pp.1-14
• /
• 2022

The change in the management environment of the logistics industry in the era of global competition is becoming an era in which customers choose companies. Differentiation from competitors through the provision of products and services suitable for customers As customers' choices change depending on their superiority, companies are constantly striving to receive or retain customers' choices. Ultimately, this competitive structure can be seen as the importance of long-term relationship building. Therefore, in this study, we examined how factors related to transaction characteristics performed by logistics companies for customer satisfaction in the transaction relationship between cargo companies and shippers affect performance and long-term transaction intentions. First, we derived the factors of logistics service, cost, logistics infrastructure, and company competency, which are transaction characteristics factors of a logistics company that must be specifically realized for customer satisfaction in transactions between logistics companies. Second, we analyzed how the transaction characteristics factors of a logistics company affect the company's performance, and finally, how the company's performance factors affect long-term transaction intentions. As a result of empirical analysis, there were no statistically significant results on the relationship between transaction characteristics and performance of logistics companies, which can be attributed to the small size of the logistics companies that were the sample. In other words, logistics companies that do not have sufficient capacity to provide services at low prices have no choice but to engage in constant bleeding competition. It can be seen that it reflects the characteristics of the industry. On the other hand, the relationship between corporate performance factors and long-term transaction intention was found to have a positive relationship. The higher the level of partnership with logistics companies and visible financial performance is, the higher the transaction will be in the future, and the more the transaction volume will be gradually increased. And even if it costs a little more, it can be seen that the intention to continue trading is greatly expressed.

• Korean Journal of Plant Resources
• /
• v.35 no.5
• /
• pp.594-606
• /
• 2022

This study was conducted to figure out the environment factors including vegetation structure and soil characteristics in natural habitats of Sageretia thea, and offers the basic information for habitats conservation and proliferation. The natural habitats of Sageretia thea were located at altitudes between 0~370 m with inclinations ranged as 3~35°. Through the vegetation research, the dominant species of tree layers were found to be divided into four communities. Cornus macrophylla (Com. I), Pinus thunbergii - Cinnamomum camphora (Com. II), Machilus thunbergii (Com. III), and Pinus thunbergii (Com. IV). The Species diversity (H') was 1.397~1.455, evenness (J') was 0.972~0.986, and dominance (D) was found to be 0.014~0.028. As a result of the physicochemical characteristics of soils, habitats soil mainly consisted of sandy soil and sandy loam soil. The average soil pH was 5.28~5.98, electronic conductivity was 0.22~63 ds/m, soil organic matter was 13.33~19.33 cmol⁺/kg, Exchange cations were appeared in the order of Ca²⁺, Mg²⁺, K⁺, and Na⁺. The Ordination result showed that Correlation coefficient between communities and environmental factors were significantly correlated with 4 main factors altitude, electronic conductivity, cation exchange capacity, exchangeable Na⁺. As expected, The result of this study will be helpful information on the preservation and mass production for use.

• Korean Chemical Engineering Research
• /
• v.59 no.3
• /
• pp.345-358
• /
• 2021

This study focuses on the development of the liquid air production process that uses LNG (liquefied natural gas) cold energy which usually wasted during the regasification stage. The liquid air can be transported to the LNG exporter, and it can be utilized as the cold source to replace certain amount of refrigerant for the natural gas liquefaction. Therefore, the condition of the liquid air has to satisfy the available pressure of LNG storage tank. To satisfy pressure constraint of the membrane type LNG tank, proposed process is designed to produce liquid air at 1.3bar. In proposed process, the air is precooled by heat exchange with LNG and subcooled by nitrogen refrigeration cycle. When the amount of transported liquid air is as large as the capacity of the LNG carrier, it could be economical in terms of the transportation cost. In addition, larger liquid air can give more cold energy that can be used in natural gas liquefaction plant. To analyze the effect of the liquid air production amount, under the same LNG supply condition, the proposed process is simulated under 3 different air flow rate: 0.50 kg/s, 0.75 kg/s, 1.00 kg/s, correspond to Case1, Case2, and Case3, respectively. Each case was analyzed thermodynamically and economically. It shows a tendency that the more liquid air production, the more energy demanded per same mass of product as Case3 is 0.18kWh higher than Base case. In consequence the production cost per 1 kg liquid air in Case3 was $0.0172 higher. However, as liquid air production increases, the transportation cost per 1 kg liquid air has reduced by $0.0395. In terms of overall cost, Case 3 confirmed that liquid air can be produced and transported with $0.0223 less per kilogram than Base case.

• Journal of Korea Water Resources Association
• /
• v.55 no.12
• /
• pp.999-1009
• /
• 2022

The Chuncheon Mullori area is an underprivileged area for water welfare that does not have a local water supply system. Here, water is supplied to the village by using a small-scale water supply facility that uses underground water and underground water as the source. To solve the problem of water shortage during drought and to prepare for the increasing water demand, a sand dam was installed near the valley river, and this facility has been operating since May 2022. In this study, in order to evaluate the reliability of water supply when a sand dam is assumed during a drought in the past, groundwater runoff simulation results using MODFLOW were used to generate inflow data from 2011 to 2020, an unmeasured period. After performing SWAT-K basin hydrologic modeling for the watershed upstream of the existing water intake source and the sand dam, the groundwater runoff was calculated, and the relative ratio of the monthly groundwater runoff for the previous 10 years to the monthly groundwater runoff in 2021 was obtained. By applying this ratio to the 2021 inflow time series data, historical inflow data from 2011 to 2020 were generated. As a result of analyzing the availability of water supply during extreme drought in the past for three cases of demand 20 m³/day, 50 m³/day, and 100 m³/day, it can be confirmed that the reliability of water supply increases with the installation of sand dams. In the case of 100 m³/day, it was analyzed that the reliability exceeded 90% only when the existing water intake source and the sand dam were operated in conjunction. All three operating conditions were evaluated to satisfy 50 m³/day or more of demand based on 95% reliability of water supply and 30 m³/day or more of demand based on 99% of reliability.

• Journal of Korea Port Economic Association
• /
• v.38 no.2
• /
• pp.81-93
• /
• 2022

Since 2008, China's shipping industry has been in a slump, with shipbuilding orders falling sharply, and high-growth excess capacity has become increasingly apparent, leaving many firms with sharply reduced orders at risk of bankruptcy and shutdown. To ensure the development of the shipbuilding industry and enhance the international competitiveness of the shipbuilding industry, it is necessary to analyze the present situation of the shipbuilding industry and the financial situation of the shipbuilding enterprises. And analyzing the problems faced by enterprises from the perspective of capital structure is very meaningful to the shipbuilders with high capital operation. We are trying to analyze the determinants of capital structure of China's shipbuilding listed companies. 30 listed Chinese shipbuilding and listed companies have been designated as sample companies that can obtain financial statements for 13 consecutive years. They also divided 30 sample companies into shipbuilding, shipbuilding-related manufacturing, and shipbuilding-related transportation. Dependent variable is the debt level of the year, independent variable includes the debt level of the previous year, fixed asset ratio, profitability ratio, depreciation cost ratio and asset size. The regression model of the panel used to analyze determinants is capital structure. The results of the empirical analysis are as follows. First, a fixed-effect model for the entire entity showed that the debt-to-equity ratio and the size of the asset in the previous period had a positive effect on the debt-to-equity ratio in the current period. Second, the impact of the profitability ratio on the debt level in the prior term also supports the capital procurement ranking theory rather than the static counter-conflict theory. Third, it was shown that the ratio of the depreciation of the prior term, which replaces the non-liability tax effect, affects the debt-to-equity ratio in the current period.