• Resources Recycling
• /
• v.31 no.6
• /
• pp.52-59
• /
• 2022

Calcium silicate based cement (CSC) is a low-carbon cement that emits less CO₂ by up to 70% compared to ordinary Portland cement during its manufacture. Most developed countries have commercialized CSC, whereas Korea is still investigating the manufacturing characteristics and basic properties of CSC. This paper provides a review of methods for manufacturing CSC using domestic raw materials and discusses the possibility of CSC localization based on an evaluation of the basic physical properties of manufactured CSC. The experimental results of this study indicate that the primary mineral components of CSC were CS, C₃S₂ C₂S, and unreacted SiO₂. This suggests the possibility of manufacturing CSC using domestic raw materials that exhibit mineral compositions similar to that of theoretical CSC. The compressive strength of CSC mortar is less than 1MPa at the age of 7 d under wet curing. This implies that hydration does not affect the property development of CSC mortar. Meanwhile, during carbonation curing, the compressive strength is 56 MPa or higher after 7 d, which indicates excellent early strength development. Furthermore, results of Thermogravimetric Analysis Differential scanning calorimetry (TG/DSC) show that a significant amount of CaCO₃ is formed, which is consistent with the results of previous studies. This implies that carbonation is associated significantly with the properties of CSC.

• International journal of advanced smart convergence
• /
• v.10 no.3
• /
• pp.17-25
• /
• 2021

As a new paradigm in non-orthogonal multiple access (NOMA), correlated superposition coding (CSC) has gained an attention in the literature of NOMA, in contrast to standard independent superposition coding (ISC). In the conventional 3-user CSC scheme, it has been reported that the average allocated power can be reduced, owing to an introduced correlation between transmitted signals. Thus, this paper proposes a 3-user cross CSC scheme with purely-imaginary correlation coefficients. First, we derive the achievable data rates of the proposed 3-user cross CSC scheme, for each of the three users. Then, simulations demonstrate that for the proposed 3-user cross CSC scheme, the achievable data rates of the first and second users increase greatly and slightly, respectively, whereas the achievable data rate of the third user decreases little, compared to those of the conventional 3-user CSC scheme. In addition, we also show that the sum rate of the three users of the proposed 3-user cross CSC scheme is much larger than that of the three users of the conventional 3-user CSC scheme. As a result, the proposed 3-user cross CSC scheme could be a solution to the problem of the reduction of the average allocated total power in the conventional 3-user CSC scheme toward the fifth-generation (5G) NOMA mobile networks.

• Journal of Power Electronics
• /
• v.8 no.3
• /
• pp.210-216
• /
• 2008

This paper presents a classical speed controller (CSC) for vector controlled induction motors. The controller explores the use of a Fuzzy Logic controller in a classical form. The controller combines the advantages of the classical controller and the properties of intelligent controllers. The Fuzzy Logic controller idea is used to obtain the CSC output equation, whereby the CSC equation is based on the speed error and its change. The CSC parameters are calculated based on the motor mechanical equation and a predefined system performance. Once the CSC parameters are obtained, the defined speed performance can be achieved at all operating conditions. The application of the CSC to control the speed of a vector controlled induction motor is presented. Different induction motor ratings are used. Simulation results in all possible olperating conditions are presented. Results show that the CSC behaves as an expert controller to provide the predefined speed performance in all possible operating conditions. Based on the results obtained in this paper, the CSC is expected to become the ultimate solution for high-performance drives of the next generation.

• BMB Reports
• /
• v.50 no.3
• /
• pp.117-125
• /
• 2017

Most of the cancers are still incurable human diseases. According to recent findings, especially targeting cancer stem cells (CSCs) is the most promising therapeutic strategy. CSCs take charge of a cancer hierarchy, harboring stem cell-like properties involving self-renewal and aberrant differentiation potential. Most of all, the presence of CSCs is closely associated with tumorigenesis and therapeutic resistance. Despite the numerous efforts to target CSCs, current anti-cancer therapies are still impeded by CSC-derived cancer malignancies; increased metastases, tumor recurrence, and even acquired resistance against the anti-CSC therapies developed in experimental models. One of the most forceful underlying reasons is a "cancer heterogeneity" due to "CSC plasticity". A comprehensive understanding of CSC-derived heterogeneity will provide novel insights into the establishment of efficient targeting strategies to eliminate CSCs. Here, we introduce findings on mechanisms of CSC reprogramming and CSC plasticity, which give rise to phenotypically varied CSCs. Also, we suggest concepts to improve CSC-targeted therapy in order to overcome therapeutic resistance caused by CSC plasticity and heterogeneity.

• BMB Reports
• /
• v.50 no.6
• /
• pp.285-298
• /
• 2017

The cancer stem cell (CSC) hypothesis has captured the attention of many scientists. It is believed that elimination of CSCs could possibly eradicate the whole cancer. CSC surface markers provide molecular targeted therapies for various cancers, using therapeutic antibodies specific for the CSC surface markers. Various CSC surface markers have been identified and published. Interestingly, most of the markers used to identify CSCs are derived from surface markers present on human embryonic stem cells (hESCs) or adult stem cells. In this review, we classify the currently known 40 CSC surface markers into 3 different categories, in terms of their expression in hESCs, adult stem cells, and normal tissue cells. Approximately 73% of current CSC surface markers appear to be present on embryonic or adult stem cells, and they are rarely expressed on normal tissue cells. The remaining CSC surface markers are considerably expressed even in normal tissue cells, and some of them have been extensively validated as CSC surface markers by various research groups. We discuss the significance of the categorized CSC surface markers, and provide insight into why surface markers on hESCs are an attractive source to find novel surface markers on CSCs.

• Biomolecules & Therapeutics
• /
• v.12 no.3
• /
• pp.185-188
• /
• 2004

The purpose of this study is to evaluate the effect of cigarette smoke condensate (CSC) on toxification/detoxification metabolic pathway in primary cultured rat hepatocytes. We measured the activities of cytochrome P450 monooxygenases (CYP450s) and UDP-glucuronyltransferase, sulfotransferase and glutathione-S-transferase in CSC-treated rat hepatocytes. CSC significantly increased the activities of hepatic CYP4501A1 and CYP4501A2 to 7.5 fold and 1.6 fold respectively, compared with control level. However, CSC did not affect the activities of conjugation enzymes. We a1so examined if treatment of CSC could change thc cytotoxicity of acetaminophen (AA) through modulation of metabolizing enzymes. In rat hepatocytes, pretreatment with CSC potentiated the cytotoxicity of AA. This result indicates that potentiation of AA toxicity by CSC pretreatment may be related to induction of CYP4501A1 and CYP4501A2.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.3
• /
• pp.251-258
• /
• 2022

In the cement industry, in order to reduce CO₂ emissions, technology for raw materials substitution and conversion, technology for improving process efficiency of utilizing low-carbon new heat sources, and technology for collecting and recycling process-generated CO₂ are being developed. In this study, we conducted a basic experiment to contribute to the development of CSC that can store CO₂ as carbonate minerals among process-generated CO₂ capture and recycling technologies. Three types of CSC clinker with different SiO₂/(CaO+SiO₂) molar ratios were prepared with the clinker raw material formulation, and the characteristics of the clinker were analyzed. As a result of analysis and observation of CSC clinker, wollastonite and rankinite were formed. In addition, as a result of the carbonation test of the CSC paste, it was confirmed that calcite was produced as a carbonation product. The lower the SiO₂/(CaO+SiO₂) molar ratio in the CSC clinker chemical composition, the lower the wollastonite production amount, and the higher the rankinite production amount. And the amount of calcite production increased with the progress of carbonation of the CSC paste specimen. It is judged that rankinite is more reactive in mineralizing CO₂ than wollastonite.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.3
• /
• pp.326-332
• /
• 2001

On a urea-molasses-straw (3:15:82; UMS) based diet effect of graded levels of cottonseed cake (CSC) supplementation on the performance of native (Bos indicus) bulls has been studied for 167 days. Eighteen growing bulls of $129{\pm}13.4kg$ weight and about 14 months old were randomly allocated to three dietary treatments designed in a completely randomized design, having six animals in each treatment. Three dietary treatments were 0, 0.5 and 1.0 kg CSC per head/d. In addition, each animal also received ad lib. UMS, 4 kg Napier (Pennisetum purpureum) grass, 500 g of each of rice and wheat bran and 60 g mineral mix daily. For unit increase in CSC, total DM intake was increased by $1g/kg\;W^{0.75}/d$ but the straw DM intake decreased by $0.54g/kg\;W^{0.75}/d$. Whole gut digestibility of DM and OM was not effected but N and ADF digestibility increased with incremental increase in dietary CSC. For unit (1kg) increase in dietary CSC intake N and ADF digestibility increased by 10 (${\pm}1.155$) and 3 (${\pm}1.732$) unit respectively. Microbial N yield for the 0, 0.5 and 1.0 kg CSC were 5.63, 5.28 and 5.16 g/kg OM apparently fermented in the rumen respectively. For each gram increase in CSC, N intake and N balance increased by 0.626 (${\pm}0.015$) and 0.625 (${\pm}0.0814$) mg/kg $W^{0.75}/d$. High apparent N balance was contrasted with low live weight gain, e.g., for 1 kg increase in CSC supplementation, live weight gain increased by only 0.077 (${\pm}0.00288$) kg/d ($r^{2}=0.99$; p<0.01). The conversion efficiency was 12.98 kg CSC per kg of live weight gain. It was concluded that unless the protein is being protected from the rumen degradation, addition of CSC to UMS diet would have little nutritional or economic advantages.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.20 no.5
• /
• pp.1311-1314
• /
• 2006

This study was peformed to investigate possible mechanisms underlying possible effect of Coicis Semen composition (CSC) on inflammatory diseases using in vivo model of RA in the mice. Results are summarized as follows. In production of inflammatory cytokines, INF-${\gamma}$ in the spleen and IL-6 in the serum were decreased by CSC treatment. TNF-${\alpha}$ in serum was significantly decreased, IL-4 in the spleen was significantly increased by CSC treatment. In production of rheumatoid factors, IgM and IgG were significantly decreased by CSC treatment. The present data suggest that CSC treatment can improve pathological damage by CIA. So we expect that CSC should be used as a effective drugs for not only rheumatoid arthritis but also another autoimmune disease. Therefore we have to survey continuously in looking for the effective substance and mechanism in the future.

• Journal of the Korea Concrete Institute
• /
• v.24 no.1
• /
• pp.53-60
• /
• 2012

The main object of this paper is to investigate the effects of high temperatures on the physical and mechanical properties of natural sand concrete(NSC) and crushed sand concrete(CSC). Test samples were exposed to high temperature ranging from $200^{\circ}C$ to $800^{\circ}C$. After exposure, various tests were conducted. Color image analysis and weight losses were determined and compressive strength test and splitting tensile strength test were conducted. The results indicated that weight losses increased as exposure temperature increased with comparable decreasing rate. The results also showed that compressive strength and splitting tensile strength and modulus of elasticity decreased as exposure temperature increased. The results also showed that residual compressive strength of NSC decreased more drastically than that of CSC at $200^{\circ}C$ and $400^{\circ}C$. Residual splitting tensile strength of NSC decreased more than that of CSC at $200^{\circ}C$, while NSC and CSC showed comparable residual strength ratio at $800^{\circ}C$.