• Journal of Construction Engineering and Project Management
• /
• 제2권2호
• /
• pp.53-60
• /
• 2012

Accurate assessment of $CO_2$ emission from buildings requires gathering $CO_2$ emission data of various construction materials. Unfortunately, the amount of available data is limited in most countries. This study was conducted to present the $CO_2$ emission data of concrete, which is the most important construction material in Korea, by conducting a statistical analysis of the concrete mix proportion. Finally, regression models that can be used to estimate the $CO_2$ emission of concrete in all strengths were developed, and the validity of these models was evaluated using 24 and 35MPa concrete data. The validation test showed that the error ratio of the estimated value did not exceed a maximum of 5.33%. This signifies that the models can be used in acquiring the $CO_2$ emission data of concrete in all strengths. The proposed equations can be used in assessing the environmental impact of various construction structural designs by presenting the $CO_2$ emission data of all concrete types.

• 대한교통학회지
• /
• 제28권6호
• /
• pp.33-42
• /
• 2010

선박 부문의 경우 UNFCCC에서는 국제해사기구(IMO)를 통해 공해를 운항하는 국제선박의 배출량 산정 및 저감방안에 대하여 논의를 위임하였으며, 이에 IMO에서는 신조선 에너지효율 설계지수 및 현존선 에너지효율 운항지수와 같은 기술적 운항적 측면과 선박에너지효율관리계획서 작성 그리고, $CO_2$ 배출권거래제, 탄소세, 온실가스 펀드 등의 시장 접근적 측면에서 다양한 의견이 제시되고 있다. IMO 보고서(2009)에 의하면 선박에 의한 이산화탄소 배출량은 1,046백만 톤으로 전세계 이산화탄소 배출량에 3.3%에 해당하는 것으로 나타났으며, 이중 국제 운항선박에 의한 이산화탄소 배출량은 870백만 톤으로 2.7%에 해당하는 것으로 나타났다. 이에 본 연구에서는 연료 수급량을 기본으로 한 Tier 1 방법으로 선박에 의한 온실가스 배출량을 산정하였으며, 국내 배출 및 국제 배출을 구분하였다. 2009년 기준 어선, 국적 연안선, 국적 외항선, 외국적선을 포함한 선박에 의한 온실가스 배출량 산정결과 31,646천톤 $CO_2$-eq/년으로 나타났으며, 국적선에 의한 국내 및 국제 배출은 각각 5,398천톤 $CO_2$-eq/년, 7,630천톤 $CO_2$-eq/년 그리고 외국적선에 의한 국제 배출량은 18,618천톤 $CO_2$-eq/년으로 나타났다.

• 자원ㆍ환경경제연구
• /
• 제28권1호
• /
• pp.1-37
• /
• 2019

본 연구는 152개 국가의 불균형 패널 자료를 활용하여 1980~2013년 기간의 국가별 소득수준에 따른 1인당 $CO_2$ 배출 수렴 현상을 시그마 수렴 모형과 베타 수렴 모형을 통해 분석하였다. 절대적 베타 수렴과 시그마 수렴 현상은 $CO_2$ 배출 감축을 위한 국가별 정책 상황에 따라 소득 그룹별로, 기간별로 상이하게 나타났다. 조건부 베타 수렴 분석 결과, 고소득 국가에서 1인당 소득의 증가가 1인당 $CO_2$ 배출량 수렴에 기여하였으며 제도의 수준과 기술의 수준이 높을수록 소득의 증가가 배출량 수렴 속도를 더 빠르게 감소시키는 것으로 나타났다. 중소득 국가는 1인당 소득의 증가가 1인당 $CO_2$ 배출량 수렴에 영향을 미쳤으나, 제도의 수준은 유의미하지 않게 나타났다. 반면 중소득 국가와 저소득 국가의 기술 수준 향상은 1인당 $CO_2$ 배출량 수렴 속도를 늦추는 것으로 나타나 배출량 증가에 기여하는 것으로 분석되었다.

• 전기학회논문지
• /
• 제59권9호
• /
• pp.1507-1513
• /
• 2010

The $CO_2$ emission can be decreased due to freedom of generator maintenance scheduling(GMS). This paper proposes assessment of $CO_2$ emission considering generator maintenance scheduling(GMS) and evaluates effect of the GMS on $CO_2$ emission. And also, this paper assesses the $CO_2$ emission and the probabilistic production cost simulation of nuclear and thermal power generators considering operation of hydro and pumped generator. The minimum reliability criterion level satisfied production cost minimization function model is used in this paper. The practicality and effectiveness of the proposed approach are demonstrated by simulation studies for a real size power system in Korea in 2010.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.35-36
• /
• 2018

According to the nation's greenhouse gas emission statistics, greenhouse gas emissions have been stiffly increasing. Accordingly, the importance of CO₂ reduction is more getting focused over the world. This trend makes the construction equipment be considered as a major target of reduction due to the large volume of emission. This study suggests the feasible methodology for estimating CO₂ emission from construction equipment and for being easily applied on the job sites. The methodology is based on the collection from the segmented CO₂ emission information of construction equipment. This study allows site personnels to estimate the total amount of CO₂ and to take appropriate actions for reasching the environmental regulations.

• 콘크리트학회논문집
• /
• 제22권6호
• /
• pp.787-796
• /
• 2010

전 세계적으로 지구 온난화의 주요원인인 $CO_2$ 발생에 대한 규제가 강화되고 있다. 반 환경산업으로 인식되는 건설 산업의 주요자재로서 다량의 $CO_2$를 배출하는 콘크리트는 생산과정에서 발생된 $CO_2$ 배출량 감소에 대한 필요성이 인식되었다. 이 논문에서는 콘크리트를 기초로 하여 자재생산, 운송, 제조단계에서 발생하는 $CO_2$ 배출량을 평가하기 위한 시스템을 구축하고, $CO_2$ 배출량을 효율적으로 저감하고 평가하기 위한 프로그램을 개발 하였다. 평가결과, 대부분의 $CO_2$ 배출량은 자재생산단계에서 발생했으며, 자재, 운송, 제조단계에서 배출된 $CO_2$ 배출량에 대하여 정량적으로 평가하였다. 더욱이, $CO_2$ 배출량을 저감하기 위하여 각 단계별로 친환경 기술을 적용하여 평가가 가능한 이 평가시스템은 콘크리트 생산에 따른 $CO_2$ 배출량을 정량적으로 평가하기 위한 시스템으로 제안할 수 있으며, 국내 레미콘생산업체는 $CO_2$ 배출량 평가를 하기 위해 이 시스템을 사용할 수 있다.

• 환경영향평가
• /
• 제8권4호
• /
• pp.59-72
• /
• 1999

The purpose of the study is to propose the concrete and realistic alternative measures for $CO_2$ emission reduction on commercial sector. To achieve the purpose, this study adopted AIM/KOREA simulation model modified from AIM(Asia-Pacific Integrated Model) originally developed by Japan National Environmental Research Institute. The results of simulation demonstrate that the $CO_2$ emission from the commercial sector in 1995 was estimated 864 million TC(tons of carbon); however, according to the base scenario, $CO_2$ emission in 2020 is expected to be increased to 1,872 million TC, which is 2.17 times greater than that in 1995. In order to mitigate the ever-increasing $CO_2$ emission, the results of AIM/KOREA simulations under various scenarios showed that the 30-thousand-won carbon tax scenario does not successfully motivate the selection of advanced technology; however, with the 300-thousand-won carbon tax, a substantial amount of $CO_2$ emission reduction by 1.69 million TC from the BaU((Business-as-Usual)scenario is expected to be achieved by year 2020. Such substantial reduction of $CO_2$ emission under the 300-thoudsand-won carbon tax scenario is due to the introduction of advanced technology, such as use of condensing boilers, forced by heavier carbon tax. Under the scenario that presumes the maximum introduction of gas-burning industrial appliances, an 2.66 million TC of $CO_2$ reduction was expected. The results of this study suggest that the $CO_2$ emission reduction measures can be interpreted in many different views. However, if people and industries are fully aware of the economic benefit of energy saving, a certain level of $CO_2$ reduction by a successful introduction of advanced energy saving technology appears to be achieved without carbon tax or subsidies.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1602-1605
• /
• 2008

We considered most general electron emission caused by temperature as well as electric field with a free electron gas model. The total electron emission current density comes from field emission effect where electron energy is lower than vacuum and from thermionic emission effect where electron energy is higher than vacuum. The total electron emission current density is shown as a function of temperature for constant electric field, and as a function of electric field for constant temperature.

• 환경영향평가
• /
• 제16권4호
• /
• pp.277-283
• /
• 2007

Since the Kyoto Protocol became into effect, Korea has been expected to be part of the Annex I countries performing the duty of GHG reduction in the phase of post-Kyoto. Therefore, it is necessary to develop emission factors appropriate to Korean circumstances. In order to develop emission factors this study utilized the CleanSYS, which is the real-time monitoring system for industrial smoke stacks to calculate the emission rate of $CO_2$ continuously. In this study, the main focus was on the power generation plants emitting the largest amount of $CO_2$ among the sectors of fossil fuel combustion. Also, an examination on the comparison of $CO_2$ emission was made among 3 generation plants using the different types of fuels such as bituminous coal and LNG; one for coal and others for LNG. The $CO_2$ concentration of the coal fired plant showed Ave. 13.85 %(10,384 ton/day). The LNG fired plants showed 3.16 %(1,031 ton/day) and 3.19 %(1,209 ton/day), respectably. Consequently, by calculating the emission factors using the above results, it was found that the bituminous coal fired power plant had the $CO_2$ emission factor average of 88,726 kg/TJ, and the LNG fired power plants had the $CO_2$ average emission factors of 56,971 kg/TJ and 55,012 kg/TJ respectably which were similar to the IPCC emission factor.

• 한국기후변화학회지
• /
• 제9권3호
• /
• pp.273-281
• /
• 2018

The purpose of this study is to consider the effectiveness of continuous $CO_2$ emission monitoring in waste incinerator. To prevent global warming, many countries are trying to reduce $CO_2$, the main greenhouse gas. Currently, Korea is implementing an emission trading scheme to reduce $CO_2$, and waste incinerators are included in this scheme as major $CO_2$ sources. However, when using waste incinerators, $CO_2$ is discharged during incineration of various types of wastes, therefore it is very difficult to calculate the amount of emissions according to IPCC guidelines. In addition, the estimation of $CO_2$ emissions by calculation is known to lack of accuracy comparing with actual emissions. Currently, Korea is operating CleanSYS, which enables continuous measurement of gases emitted into the atmosphere. Therefore, it is possible to estimate the $CO_2$ emissions of waste incineration facilities. The IPCC, which published $CO_2$ emission calculation guidelines, recognizes that direct measurement of emission is a more advanced method in cases of various $CO_2$ emission sources such as a waste incineration facility. Also, Korean emission trading scheme guidelines allow estimation of $CO_2$ emissions by continuous measurement at waste incineration facilities. Therefore, this study considers the effectiveness of a direct measurement method by comparing the results of CleanSYS with the calculation method suggested by the IPCC guidelines.