• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.1448-1451
• /
• 2004

This study is concerned about the design and development of three dimensional bending machine. The purpose of this study is design and development of three-dimensional bending machine by analysis of bending process and structural analysis simulation. The analysis is carried out by FEM simulation using DEFORM and CATIA V5 software. Based on this study, the three dimensional bending machine was developed. In order to evaluate a performance and reliability of the developed three dimensional bending machine, we used laser interferometer and three axial measuring system.

• IE interfaces
• /
• v.9 no.2
• /
• pp.119-128
• /
• 1996

A procedure is presented for a 3D-contour machining without cutter interferences. The 3D-contouring machining along a spatial curve is often required for manufacturing trimming and flange dies in motor industries. Input data for the machining contour is a spline curve with polynomial vector equation provided by CATIA system. Points are sampled on the contour curve and line segments and helical curves are approximated from the point data. Cutter interference is checked on the approximated spline and all of interference curves are substituted with interference-free helical curves for a tool path generation. The non-machined curve areas are locally machined by tools with smaller diameters. A tool radius offset is considered for generating NC data to be free with tool size.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2016.05a
• /
• pp.88-89
• /
• 2016

선택적 환원 촉매(SCR : Selective Catalytic Reduction) 시스템은 대기오염을 예방하기 위한 배기가스 처리장치 중 하나이다. 본 연구에서는 전산유체역학(CFD : Computational Fluid Dynamics)를 사용하여 SCR 시스템 의 효율향상을 위하여 ANSYS-CFX package를 이용하여 점성 유동 해석을 수행하였다. SCR 시스템의 점성 유동 흐름의 전산 유체 역학을 이용하여 시뮬레이션하기 위하여 Navier-Stokes 방정식을 지배방정식으로 사용하였다. CATIA V5를 사용하여 SCR 시스템의 형상을 3D 모델링을 하였고, 암모니아와 배기가스의 혼합 비율을 확인하기 위해 요소수 분사 노즐의 위치를 변경하였다. 요소수 분사 노즐은 배기관의 입구로부터 1/3, 1/2, 2/3에 위치한다. 또한, 분사 노즐의 위치가 배기관 입구의 1/3에 위치할 때 노즐의 분사구수에 따른 효율을 확인하기 위하여 분사구수를 4Hole, 6Hole, 8Hole일 경우를 확인하여 비교하였다. 시뮬레이션의 결과로는 배기관 입구에 가까울수록, 분사구수가 많을수록 효율이 좋아짐을 확인하였다.

• Journal of Power System Engineering
• /
• v.16 no.6
• /
• pp.24-29
• /
• 2012

In this study, the numerical simulation has been performed to investigate the hydrodynamic evaluation between double plate steel rudder and newly designed foil type rudder for small fishing boat. The simulations are carried out in 2 speed ranges with 7 variations of flow's angle of attack which is at intervals of about 5 degree respectively. As the well-known commercial code, FLUENT and CATIA are used as the solver. The simulation results show that new designed foil type rudder is better than conventional double plate rudder in terms of Lift and Drag of running boat in the water.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.4
• /
• pp.109-114
• /
• 2011

An impeller is difficult to machine because of severe collision due to the complex shape, overlapping and twisted shape that form impeller blades. So, most CAM software companies have developed CAM module for manufacturing impeller in addition to their CAM software. But it is not still easy for inexperienced users to machine impellers. The purpose of this paper is the development of automatic CAM module for manufacturing impeller(E-ICAM) which is based on visual basic language and it is used CATIA graphical environment in order to be easily machining impellers. Automatic CAM module for manufacturing of impellers generates tool path, and proposes recommended cutting condition according to the material of stock and tool. In addition, it has also included a post processor for 5-axis control machining. Therefore the user can easily machine impellers using this automation module.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.9 no.3
• /
• pp.1-7
• /
• 2010

The aim of this research is to evaluate movement and path characteristics of developed heavy duty handling robot using laser tracker(API T3) according to the ISO 9283 robot performance evaluation criteria. As carry out 3D modeling and simulation using CATIA, a test cube was set up to select moving and measuring range of robot. Performance test for pose and distance accuracy, path and path velocity accuracy under payload zero and 440kgf was accomplished. The resulted output data show the reliability of the developed robot.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.9 no.6
• /
• pp.43-50
• /
• 2010

This study aims to analyze the structural safety by comparing deformation and equivalent stress of door with a stiffener or no stiffener when the door crashes against something in case of overturn. Three types are classified on the basis of the no stiffener model in the vehicle door. One is the type which has a stiffener. Another is the type which has no stiffener and the other is the type which has a hole in the stiffener. These three types are compared with each other by analyzing. This side door of vehicle is the automotive part about the kind of vehicle as Mercedes Benz E-Klasse scaled down as 1/18 times as the real size. The study model of vehicle door is modelled by CATIA program and it is analyzed by ANSYS.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.3
• /
• pp.41-47
• /
• 2013

This study was carried out to improve the design of fuel injection nozzle for marine medium speed diesel engine. For this purpose, fuel injection nozzle was modeled and simulated using CATIA V5R19 and FLUENT & MSC Nastran. Analyses of flow and heat transfer, respectively, were performed to find the optimal design of fuel injection nozzle. As the results, big pressure drop, which may lead to cavitation damage, was occurred at inlet of fuel injection hole with diameter 0.3mm. Furthermore, it was confirmed that the increase of mean temperature of fuel injection nozzle was almost a half in comparison with that of fuel injection nozzle tip.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.12 s.117
• /
• pp.1244-1251
• /
• 2006

The objective of this paper is to get excitation forces of the engine at each of the brackets for the prediction of the vehicle interior noise by the powertrain. A powertrain geometry model is produced by CATIA and its FE model is made by MSC/Patran. A vibration mode analysis and a running mode analysis are experimentally implemented. After getting a satisfied MAC value by doing a correlation about a measured mode analysis value and analyzed value through MSC/Nastran software, all components are assembled through MSC/ADAMS software which is a dynamic analysis tool. We can predict the vibration of brackets which is the last points to occur the force of the engine combustion by analyzing the combustion force produced by engine mechanism.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1996.04a
• /
• pp.100-103
• /
• 1996

Presented in this study is an algorithmic procedure to obtain polyhedral model from a compound surface. The compound surface in this study denotes a collection of trimmed surfaces without topological relations. The procedure consists of two main modules: CAD data interface, and surface conversion to polyhedral model. The interface module gets geometric information from CAD databases, and makes topological information by scanning the geometric information. We are investigating CATIA system as a data source system. In the surface conversion module, a shell(compound surface with topological information) is approximated to a triangular-faceted polyhedral surface model through node sampling and triangulation steps. The obtained polyhedral model should obey the vertex-to-vertex rule and meet tolerance requirements. Since the polyhedral model has a simple data structure and geometry processing for it is very efficient and robust, the polyhedral model can be used in various applications, such as surface rendering in computer graphics, FEM model for engineering analysis, CAPP for surface machining, data generation for SLA, and NC tool path generation.