• 대한방사선기술학회지:방사선기술과학
• /
• 제26권3호
• /
• pp.13-17
• /
• 2003

현대 병원들은 보다 나은 의료서비스를 위해 디지털 시스템을 갖추고자 노력하고 있다. 하지만, 아직도 많은 부분은 아날로그 시스템과 Film 출력에 의존하고 있다. 본 연구는 차량 이동형 흉부 전용 간접 촬영기에 디지털 영상 변환 장치와 이에 연동되는 X-ray 발생장치의 제어 시스템, 출력 시스템을 디지털시스템으로 변환, 연동시켰으며, 획득한 영상을 간접 촬영 전용프로그램에서 편리하게 판독 할 수 있도록 설계하여 임상에 적용시켰다. 이러한 과정에서 발생되는 문제점을 현실적으로 해결하였으며, 방사선사 입장에서 업무의 효율성을 높이고자 몇 가지 프로그램을 개발 적용하였다. 향후 미래지향적인 디지털의료 영상 시스템을 갖추기 위해 각종 프로그램과 시스템과도 연동이 되도록 설계하여 임상에 적용하여 우수성을 입증하였다.

• 대한조선학회논문집
• /
• 제30권2호
• /
• pp.13-23
• /
• 1993

선박의 초기설계 작업에 컴퓨터를 이용하기 위하여, 초기설계용 전산시스템을 개발하고자 하며, 그 개발을 위한 방안을 모색해 보았다. 이러한 시스템의 개발을 위해서는 세가지 요소가 적절히 잘 조화되어야 한다. 첫째는, CAE로 분류될 수 있는 것으로, 그동안 부분적으로 전산화되어 초기설계 작업에 이용되고 있는 단위 모듈들이다. 둘째는, 설계 방법론이라고 할 수 있는 것으로, 초기설계의 작업순서를 규명하고 설계자의 작업방식을 재현하는 부분이다. 셋째는, 전산 요소기술이라고 분류되는 것으로, 전산시스템을 개발하는데 필요한 컴퓨터 분야의 기술들이다. 이 글에서는 이 세가지 기술요소들에 대한 현황 분석을 토대로 초기설계용 시스템을 구성하기 위해서 취해야할 방안에 대해서 연구한 결과를 소개한다. 그 결과로서 선박의 초기설계에 관련하여 새로 관찰된 것들과, 전산시스템의 개발을 위해 취해야할 몇가지 방안을 제안하였다.

• 한국가구학회지
• /
• 제20권5호
• /
• pp.467-479
• /
• 2009

The high-tech computer technology developments have greatly affected the area of design education. Starting from the mid 80s, innovations in visual presentation methods have heightened with 2D computer graphic programs, CAD & 3D modeling, and Rapid Prototype that allows dimensional generation. The specialty and quality in design studio education have advanced due to the development in presentation methods such as Power Point and Keynote. But there are many problems with the current method of presenting the visual outcome in a data format using beam projectors, which is a vertical presenting method compared to the old studio study method of conducting discussions and reviews based on the substantial outcome. The essence of studio study that allows for comparisons and analysis by horizontally opening up the various work outcomes is being offset. Also the requirement for manual idea sketching work that plays an important role in the initial design phase continuing to decrease due to the digital working process dependence and cumbersome procedures in the presentation. In order to resolve this problem, the CALM system (Class Applied LCD Modular System) has been developed that replaces the method of attaching the sketches or renderings on the wall with a digital multi-display system. In a nutshell, individuals will upload the outcomes online and display them on the CALM system studio that is composed of 32 LCD (Columns: 4 $\times$ Rows: 8) monitors that are 19 inches in size so that various personnel can openly study the design outcomes. Also the central 42 inch PDP monitor that offers touch pad capability allows each design outcome to be described and examined by expanding. The concept phase of this development process has elevated to the production of an operating prototype that is being reviewed of its practicality. It is considered that the development of this system will decrease the extreme tendency of depending on digital operation but achieve revitalization of a more realistic and opened studio study environment compared to the individual consulting method of the old study approach.

• 한국BIM학회 논문집
• /
• 제3권3호
• /
• pp.9-18
• /
• 2013

In case of applying the BIM method in the civil engineering of irregularly shaped structure, BIM method began to be introduced in the current building engineering area compared with the expected effects of the relatively high construction productivity has been recognized. In this paper, I have developed quantity calculation algorithms applying it to earthwork and bridge construction, tunnel construction, retaining wall construction, culvert construction and implemented BIM based 3D-BIM Modeling quantity calculation. Structure work in which errors occurred in range between -6.28% ~ 5.17%. Especially, understanding of the problem and improvement of the existing 2D-CAD based of quantity calculation through rock type quantity calculation error in range of -14.36% ~ 13.07% of earthwork quantity calculation. It's benefit and applicability of BIM method in civil engineering. In addition, routine method for quantity of earthwork has the same error tolerance negligible for that of structure work. But, rock type's quantity calculated as the error appears significantly to the reliability of 2D-based volume calculation shows that the problem could be. Through the estimating quantity of earthwork based 3D-BIM, proposed method has better reliability than routine method. BIM, as well as the design, construction, maintenance levels of information when you consider the benefits of integration, the introduction of BIM design in civil engineering and the possibility of applying for the effectiveness was confirmed. In addition, as the beginning phase of information integration, quantity document automation program has been developed for activation of BIM. And automatically enter the program code number, linkage and manual volume calculation program, quantity document automation programs, such as the development is now underway, and step-by-step procedures and methods are presented.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.844-847
• /
• 2005

A seamless analysis of complex geometry is one of greatly interesting topic. However, there are still gaps between the industrial applications and fundamental academic studies owing to time consuming modeling process. To resolve this problem, an auto mesh generation program based on grid-based approach has been developed for IT-product in the present study. At first, base mesh and skin mesh are generated using the information of entities which extracted from IGES file. Secondly the provisional core mesh with rugged boundary geometry is constructed by superimposing the skin mesh as well as the base mesh generated from the CAD model. Finally, the positions of boundary nodes are adjusted to make a qualified mesh by adapting node modification and smoothing techniques. Also, for the sake of verification of mesh quality, the hexahedral auto mesh constructed by the program is compared with the corresponding tetrahedral free mesh and hexahedral mapped mesh through static finite element analyses. Thereby, it is anticipated that the grid-based approach can be used as a promising pre-processor for integrity evaluation of various IT-products.

• 정보과학회 컴퓨팅의 실제 논문지
• /
• 제21권7호
• /
• pp.506-511
• /
• 2015

입출력 가상화는 하나의 물리적 입출력 장치를 하나 이상의 가상 데스크탑들이 공유해서 사용 할 수 있도록 하는 기술로서 일반적으로 가상화 소프트웨어가 소프트웨어적으로 에뮬레이션하여 제공하는 가상 I/O 장치들을 가상 데스크탑에서 사용한다. 소프트웨어 에뮬레이션 기반 I/O 장치들을 사용하는 가상 데스크탑들은 성능이 떨어지고 고사양의 응용 프로그램을 지원할 수 없는 문제점을 가지고 있다. 본 논문에서는 이러한 서비스의 품질 및 성능 저하를 극복하기 위해 PCI기반 하드웨어 직접 할당기술을 이용한 망분리 가상 데스크탑 시스템을 제안한다. 제안하는 시스템은 하나의 물리적 데스크탑 컴퓨터에 서버 가상화 기술을 이용하여 사용자에게 인터넷 등의 외부망과 인트라넷 등의 업무망 접속을 위한 독립적인 데스크탑을 제공한다. 이를 통해 물리적 망분리를 위한 별도의 데스크탑 설치 및 논리적 망분리를 위한 네트워크 패킷의 검사에 따른 성능의 저하 없이 가상 데스크탑 서비스를 이용한 물리적 네트워크 망분리 시스템을 제공한다.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.928-934
• /
• 2009

Although the evolution and deployment of information technologies will undoubtedly play an important role in the current construction industry, many engineers are still unsure of the economic value of using these technologies. Especially for the planning of a construction project, a collaboration system to utilize the whole resources is a essential tool for the successful outcome. A detailed, authoritative, and readily accessible information model is needed to enable engineers to make cost-effective decisions among established and innovative plan alternatives. Most engineers rely on limited private experiences when they create solutions or design alternatives. Initial planning is crucial for the success of the construction project. Most construction projects are done through collaboration of engineers who have different specialized knowledge. Information technologies can dramatically enhance the performance of the collaboration. For the information delivery, we need a mediator between engineers. Object-based 3-D models are useful for the communication and decision assistance for the intelligent project design. In this paper, basic guidelines for the 3-D design according to different construction processes are suggested. Adequate interoperability of 3-D objects from any CAD system is essential for the collaboration. Basic architectures of geometry models and their information layer were established to enable interoperability for design checks, estimation and simulation. A typical international project for roadway was chosen for the pilot project. 3-D GIS model was created and bridge information models were created considering several requirements for planning and decision making of the project. From the pilot test, the integrated construction project planning using 3-D information models was discussed and several guidelines were suggested.

• 한국소음진동공학회논문집
• /
• 제25권12호
• /
• pp.856-865
• /
• 2015

In a high-speed press, numerous moving links are interconnected and each link executes a constrained motion at high speed. As a consequence, high-level dynamic unbalance force and unbalance moment are transmitted to the main frame of the press, which results in unwanted vibration and significantly degrades manufacturing accuracy. Dynamic unbalance force and unbalance moment inevitably transmits high-level vibrational force to the foundation on which the press is installed. Minimizing the vibrational force transmitted to the foundation is critical for the protection of both the operators and the surrounding structures. The whole task should be carried out in two steps. The first step is to reduce dynamic unbalance based upon kinematic and dynamic analyses. The second step is to design and build an optimal vibration isolation system minimizing the vibrational force transmitted to the foundation. Firstly, the dynamic design method is presented to reduce dynamic unbalance force and moment. For this a 3D CAD software was utilized and a computer program was written to compute dynamic unbalance force and moment. Secondly, the design method for vibration isolation system is presented. The method for designing coil springs and viscous dampers are explained in detail.

• 한국항공우주학회지
• /
• 제36권6호
• /
• pp.532-540
• /
• 2008

최근 구조변형을 고려한 항공기의 공력특성을 계산하는데 필요한 CFD와 CSD 기법이 연계된 FSI 시스템에 관한 관심이 증대하고 있다. 본 연구에서는 유체유발 구조 변형을 고려한 수렴된 구조형상에 대한 공력특성 예측을 위해 유체-구조 연계 시스템인 FSI(Fluid- Structure Interaction)를 구축하였다. 각 모듈의 연계, 특히 CSD와 CFD의 결합 및 변형된 형상에 대한 공력격자 재생성을 위해 VSI(Volume Spline Interpolation)와 격자 변형 코드를 개발하였으며, 공력과 구조의 해석 모듈로 상용 프로그램인 FLUENT와 NASTRAN을 사용하였다. 구축된 시스템을 DLR-F4 날개에 적용하여 정적 유체-구조 연구를 수행하였으며, 그 결과 마하수 0.75에서 변형된 형상에 대한 양력 및 항력 계수는 약 20.26%, 18.5% 감소하는 것으로 나타났다.

• 한국정밀공학회지
• /
• 제11권4호
• /
• pp.77-87
• /
• 1994

This paper deals with an automated forming sequence design system by which designers can determine desirable operation sequences even if they have little experience in the design of cold forging process. The forming sequence design in the cold forging is very important and requires many kinds of technical and empirical knowledge. They system isproposed, which generates forming sequence plans for the multistage cold forging of axisymmtrical solid products. Since the process of metal forming can be considered as a transformation of geometry, treatment of the geometry of the product is a key in planning process. To recognize the geometry of the product section, section entity representation and primitive geometries were used. Section entity representation can be used for the calculation of maximum diameter, maximum height, and volume. Forming sequence for the part can be determined by means of primitive geometries such as cylinder, cone, convex, and concave. By utilizing this geometrical characteristics (diameter, height, and radius), the product geometry is expressed by a list of the priitive geometries. Accordingly the forming sequence design is formulated as the search problem which starts with a billet geometry and finishes with a given product one. Using the developed system, the sequence drawing with all dimensions, which includes the proper sequence of operations for the part, is generated under the environment of AutoCAD. Based on the results of forming sequence, process variables(strain, punch pressure, die inner pressure, and forming load) are determined.