• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.644-645
• /
• 2006

TiC-and Ti(C,N)-based cermets are excellent in semi-and final finishing of work piece during cutting operations. Typical microstructure of the cermets is a core/rim structure. The undissolved Ti(C,N) cores contribute to their high hardness while the rim phases, (Ti,M1,M2)(C,N)-type solid solutions, play great roles in enhancing the toughness. In this paper, various ultrafine pre-mixed MeC-Ni powders were synthesized and the powders were sintered or hot pressed after mixing in order to control the size and volume fractions of core and rim phases in the system. This paper will present the factors determining the microstructure along with mechanical properties.

• 한국작물학회지
• /
• 제48권5호
• /
• pp.369-371
• /
• 2003

Cyanidin 3-glucoside (C3G) content contained in the grains of blackish purple rice varieties, Heugjinjubyeo, Kilimheugmi, Heugnambyeo, Sanghaehy-anghyeolla, and the progenies derived from their crosses was evaluated by HPLC and UV-Vis spectroscopy. C3G content was higher in the range of 10-30% by using UV-Vis method compared to HPLC method. A significant linear relationship was, however, observed between two analytical methods. The correlation coefficient was 0.98. Thus, this results suggested that it would be able to use UV-Vis spectroscopy to determine C3G content which does not demanded precise value like selection.

• 농업생명과학연구
• /
• 제45권6호
• /
• pp.265-278
• /
• 2011

하절기 온실 내 온도와 상대습도를 동시에 제어할 목적으로 압축공기를 이용한 이류체 분무 포그 냉방을 도입한 유리온실에서 측창의 개폐수준이 온실내의 온도와 상대습도 제어에 어떠한 영향을 주는지 분석하였다. 제어과정은 온실 환경변수들을 측정하고, 이를 반영하여 온실 내 수분평형방정식과 열평형방정식을 정립한 다음, 이 방정식들을 프로그램으로 코딩하여 각 사이클의 천창 개폐량과 포그 분무량을 결정하고 제어하였다. 온실의 온습도 제어목표는 온도와 습도를 각각 28, 75%로 설정하였고, 실험은 측창이 전혀 열리지 않은 0%, 50% 열린 경우, 100% 열린 경우 세 가지 모드를 비교분석하였다. 제어실험결과 온실 내 건구온도의 평균은 모드에 따라 각각 28.2, 27.2 $26.3^{\circ}C$로 나타났으며, 표준편차는 $0.4{\sim}0.8^{\circ}C$이었다. 상대습도는 측창을 완전히 닫은 모드인 0%의 경우 평균 76.3% 정도로서 목표 상대습도인 75%에 상당히 근접해서 제어되고 있었으며, 표준편차가 2.1%로서 다른 모드에 비해 상당히 안정된 범위에서 유지되는 것으로 나타났다. 0%의 모드에서 가장 목표온도로 잘 제어되고 있는 것으로 나타났다.

• 센서학회지
• /
• 제16권6호
• /
• pp.434-440
• /
• 2007

Two kinds of new NOx sensing mechanism was proposed and examined. One of those was potentiomtric sensor based on the measurement of decomposed oxygen from NO using YSZ porous diffusion barrier and Pd catalytic electrode. The sensor based on decomposed oxygen measurement responded to the range of 300 - 1000 ppm NO in $N_{2}$ environment and the sensitivities were coincident with theoretical values at 700 and $800^{\circ}C$ but the decomposition rate depended on gas flow rate. The other sensor was equilibrium potentiometric type using $Gd_{2}O_{3}$-nitrates solid solution as sensing material. The sensor using $Gd_{2}O_{3}$-nitrates solid solution was suitable for NOxxsensing at $700^{\circ}C$ in 5 % oxygen and the sensitivity was 19.3 mV/decade. However, long term stability of the sensing material at high temperature was not sufficient.

• 한국재료학회지
• /
• 제15권8호
• /
• pp.514-517
• /
• 2005

Effects of nitrogen and oxygen annealing on the carrier concentration, carrier mobility, electrical resistivity and PL characteristics as well as the crystallinity of ZnO films deposited on sapphire substrates by atomic layer deposition (ALD). X-ray diffraction (XRD), Scanning electron microscope (SEM), photoluminescence (PL) analyses, and Hall measurement were performed to investigate the crystallinity, optical properties and electrical properties of the ZnO thin films, respectively. According to the XRD analysis results the crystallinity of the ZnO film annealed in an oxygen atmosphere is better than that of the ZnO film annealed in a nitrogen atmosphere. Annealing undoped ZnO films grown by ALD at a high temperature above $600^{\circ}C$ improves the crystallinity and enhances W emission but deteriorates the electrical conductivity of the flms. The resistivity of the ZnO film annealed particularly at $800^[\circ}C$ in a nitrogen atmosphere is much higher than that annealed at the same temperature in an oxygen atmosphere.

• 대한금속재료학회지
• /
• 제48권9호
• /
• pp.856-860
• /
• 2010

Silver nanoparticles were formed on silica substrates through thin film dewetting at high temperature. The microstructural and morphological evolution of the particles were characterized as a function of processing variables such as initial film thickness, annealing time, and temperature. Silver thin films were deposited onto the silica using a pulsed laser deposition system and annealed in reducing atmosphere to induce agglomeration of the films. The film thicknesses before dewetting were in the range of 5 to 25 nm. A noticeable agglomeration occurs with annealing at temperatures higher than $300^{\circ}C$, and higher annealing temperature increases particle size uniformity for the same film thickness sample. Average particle size linearly correlates to the film thickness, but it does not strongly depend on annealing temperature and time, although threshold temperature for complete dewetting increases with an increase of film thickness. Lower annealing temperature develops faceted surface morphology of the silver particles by enhancing the growth of the low index crystal plane of the particles.

• Journal of Korean Neurosurgical Society
• /
• 제61권5호
• /
• pp.582-591
• /
• 2018

Objective : To evaluate the magnetic resonance (MR) imaging features that have a statistically significant association with the need for a tracheostomy in patients with cervical spinal cord injury (SCI) during the acute stage of injury. Methods : This study retrospectively reviewed the clinical data of 130 patients with cervical SCI. We analyzed the factors believed to increase the risk of requiring a tracheostomy, including the severity of SCI, the level of injury as determined by radiological assessment, three quantitative MR imaging parameters, and eleven qualitative MR imaging parameters. Results : Significant differences between the non-tracheostomy and tracheostomy groups were determined by the following five factors on multivariate analysis : complete SCI (p=0.007), the radiological level of C5 and above (p=0.038), maximum canal compromise (MCC) (p=0.010), lesion length (p=0.022), and osteophyte formation (p=0.015). For the MCC, the cut-off value was 46%, and the risk of requiring a tracheostomy was three times higher at an interval between 50-60% and ten times higher between 60-70%. For lesion length, the cut-off value was 20 mm, and the risk of requiring a tracheostomy was two times higher at an interval between 20-30 mm and fourteen times higher between 40-50 mm. Conclusion : The American Spinal Injury Association grade A, a radiological injury level of C5 and above, an MCC ${\geq}50%$, a lesion length ${\geq}20mm$, and osteophyte formation at the level of injury were considered to be predictive values for requiring tracheostomy intervention in patients with cervical SCI.

• 마이크로전자및패키징학회지
• /
• 제12권4호통권37호
• /
• pp.301-306
• /
• 2005

새로 개발된 Sn-1.8Bi-0.7Cu-0.6In 솔더의 리플로우 후 고온시효 특성을 전당강도 및 미세구조 분석을 통하여 평가하였다. 범프 형성을 위하여 스텐실 프린트법을 사용하였다. Sn-1.8Bi-0.7Cu-0.6In 솔더의 전단강도가 초기 및 고온시효 후에도 가장 높았고, 생성된 계면 금속간화합물은 리플로우 초기뿐만 아니라 시효 후 동일 하게 $(Cu,\;Ni)_6Sn_5$가 형성되었다. 또한, 500시간 시효 이전에 솔더의 분리 현상이 관찰되었다.

• 한국작물학회지
• /
• 제60권4호
• /
• pp.470-474
• /
• 2015

공시된 교잡종에 대한 식물학적 특성, 잡종강세와 유전적 거리 및 종실특성에 대한 분석 결과는 공시 교잡종에 대한 간장은 CNU H09-26에서 228.5 cm, CNU H09-30에서135.2 cm 범위로 큰 변이를 나타냈으며, 착수고 역시 CNU H09-23에서는 78.2 cm, CNU H09-30에서 22.1 cm으로 교잡종간에 큰 차이를 보였다. 이삭길이는 공시종 중에서 CNU H09-26에서 21.2 cm로 가장 길었고 CNU H09-13에서 10.8 cm로 가장 작게 나타났다. 아밀로 그램의 특성 중에서 호화개시온도는 CNU H09-23의 $71.1^{\circ}C$로 가장 낮은 온도에서 호화가 시작되었으며 식미가 우수한 반면 CNU H09-7은 $76.0^{\circ}C$로 호화온도가 가장 높았다.

• Applied Biological Chemistry
• /
• 제28권1호
• /
• pp.8-12
• /
• 1985

두부의 제조공정중 Ca염의 농도를 전기전도도법에 의하여 측정할 수 있도록 전극을 제작하여 화학분석 방법과 비교하였다. 전극은 구리판을 재료로 3가지 종류로 제작하여 $CaCl_2$용액, 순물, -agar gel 및 두부에서 전기전도도를 측정하는데 사용하였다. 전기전도도와(Y, mho)와 Ca농도 (C, Mole $\bar{C}$, mg% 습물기준) 간에는 직선적 비례관계를 보였고, 순물과 두부에서 실험적으로 얻어진 회귀직선의 방정식은 다음과 같다. Y순물 = 0.6364C+0.0775 Y두부$=7.1503{\times}10^{-5}\bar{C}-2.9895{\times}10^{-3}$ 이들 관계식은 두부에서 r=0.91(두부)에서 r=0.99(순물)에 이르는 신뢰도를 나타냈다.