• 대한전기학회논문지:시스템및제어부문D
• /
• 제53권10호
• /
• pp.720-726
• /
• 2004

The data transmission over MVB(Multifunction Vehicle Bus) of TCN(Train Communication Network) is divided into the periodic transmission phase and the sporadic transmission phase. TCN standard recommends the event-polling method as the message transfer in the sporadic phase. However, since the event-polling method does not use pre-scheduling to the priority of the messages, it is inefficient for the real-time systems. To schedule message transmission, a master node should know the priority of message to be transmitted by a slave node prior to the sporadic phase, but the existing TCN standard does not support any protocol for this. This paper proposes the slave frame bit-stuffing algorithm, with which a master node gets the necessary information for scheduling and includes the simulation results of the event-polling method and the proposed algorithm.

• Journal of Electrical Engineering and information Science
• /
• 제3권1호
• /
• pp.14-20
• /
• 1998

The resistive shunting for the fine control of a Direct Energy Transfer(DET) systems is fully developed, but the non-resistive shunting using variable size solar array segments is in progress. This paper presents the spacecraft power control through switching of solar array segments, which uses a fully regulated DET power regulation. This method eliminates a dissipative element and removes the associated design limitations which arise from the dissipative elements for radiating cooling in deep space. The switching shunt regulator comprises the switched Solar Array Shunt(SAS) modules that regulate the solar array power. These SAS modules connect/disconnect the solar array segments to/from the bus according to the loading in the main bus without significant variations in the dissipation level. In this paper, twelve segments are used in the shunting. In order to verify the basis of analysis, the computational result of an analytic loop gain is performed.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제6권4호
• /
• pp.246-251
• /
• 2006

In this paper, we introduce an implementation method of the CBS (Cycle Base Simulator), which describes the operation of a DSP (Digital Signal Processor) at a pipeline cycle level. The CBS is coded with C++, and is verified by comparing the results from the CBS and HDL simulation of the DSP with the various test vectors and application programs. The CBS shows the data about the internal registers, status flags, data bus, address bus, input and output pin of the DSP, and also the control signals at each pipeline cycle. The developed CBS can be used in evaluating the performance of the target DSP before the RTL(Register Transfer Level) coding as well as a reference for the RTL level design.

• 전자공학회논문지B
• /
• 제33B권3호
• /
• pp.193-201
• /
• 1996

The space power system for communication satellite which employs the direct energy transfer (DET) method consists of solar array, battry, shunt regulator, charger/discharger and power control unit (PCU). In this paper, the development of the DET power system charger/discharger unit and a microprocessor based PCU is developed for simplicity and flexiblity in the modificatin of control algorithm. A 28V bus voltage, 400W power rting power simulator is built and tested to verify the operation of the simulator at each mode and the stability of mode transition is analyzed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.257-260
• /
• 1988

A protocol on transferring informations between IBM-PC/AT and STC(self tuning controller) by using the RS-485 bus is suggested. The operating algorithm is designed so that the host computer monitors the status of STC, and can be updating parameters depending on the environmental conditions for the various oprating mode.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(1)
• /
• pp.291-294
• /
• 2002

This paper proposed interface test method for performance verification of communication and broadcasting satellite between communication and broadcasting satellite payload and EGSE(Electrical Ground Support Equipment). We need ground support equipment for test them to performance verification and conform interface function of payload. This paper define tile telemetry transfer method for control payload using GSE(Ground Support Equipment) and receive telemetry data collected from GSE through bus simulator

• 전력전자학회논문지
• /
• 제19권2호
• /
• pp.194-200
• /
• 2014

In DC micro-grid system energy storage systems (ESS) are responsible for storing energy and balancing power. Also, control target of the bidirectional DC-DC converter(BDC) for ESS should be changed depending on the operating mode. During the grid connected mode, the BDC controls the battery current or voltage. When a grid fault occurs, the BDC should change the control target to regulate the DC-bus. The BDC with conventional control method may experience large transient state during the mode change. This paper proposes a control method of BDC for ESS. The proposed control method is able to provide autonomous and seamless mode transfer by a variable current limiter. To validate the proposed concept, simulation results using PSIM and experimental results from a 2kW prototype are provided.

• 전자공학회논문지S
• /
• 제36S권11호
• /
• pp.9-14
• /
• 1999

본 논문은 10Gbps 광 전송 장치의 저속부와 고속부 셀프 간에 77.76Mbps의 10라인의 전송 방법인 H-BUS 방식보다 효율적인 622Mbps 의 1라인으로 전송하기 위하여 622Mbps로 수신되는 데이터를 동기식 디지털 계위(SDH)에 정의된 동기식 전달방식(STM)-64 프레임 형태로 정렬할 수 있는 리프레임 방법을 설명하였으며 이를 VHDL로 설계하여 10Gbps 광 전송 장치의 T14U 보드의 10G-S4 ASIC내에 적용하였다.

• 한국컴퓨터정보학회논문지
• /
• 제24권11호
• /
• pp.1-9
• /
• 2019

본 논문에서는 DRAM으로 전송되는 커맨드 버스의 전력 소모량을 감소시킬 수 있는 Small Active Command 기법을 제안한다. 이를 위해, DRAM으로 전달되는 주소 중 가장 큰 크기를 차지하는 Row 주소를 포함하고 다중패킷으로 구성된 ACTIVE 커맨드를 대상으로 한다. 제안된 Small Active Command 기법은 자주 참조되는 Row 주소를 Hot 페이지로 식별하고 메모리 컨트롤러와 DRAM에 적재된 작은 캐시(테이블)의 인덱스 번호를 Row 주소를 대신하여 단일 패킷으로 전달한다. 제안된 기법에서는 인덱스 번호 전달과 캐시 동기화 관리를 위해 기존 DRAM커맨드의 사용하지 않는 비트를 활용한 I-ACTIVE와 I-PRECHARGE 커맨드를 추가하였다. 시뮬레이션을 이용한 실험 결과 제안된 방식은 Close-page 정책과 Open-page 정책에서 각각 평균적으로 20%, 8.1%의 커맨드 버스 전력 소모량을 감소시켰다.

• 전자공학회논문지S
• /
• 제34S권6호
• /
• pp.67-76
• /
• 1997

In radar signal processing, an A/D converter with sufficient dynamic range and high sampling speed is required to detect the weakest target signals in heavy clutter and ECM environments. As the sampling frequency increases, the amount of digital data transfered to the signal processing module is also increased. To overcome these massive data transfer burden, we need an A/D conversion module with an enough data transfer rate. In this paper, we proposed an implementation scheme of a new A/D conversio module that can be used in multi-mode 3-D phased array radar signal processing system, and evaluated the performance. The proposed A/D conversion module is implemented with a standard A/D converter and a 6U-standard VME bus.