• Journal of Korean Society for Atmospheric Environment
• /
• v.3 no.2
• /
• pp.39-45
• /
• 1987

Rubber particles emitted from automobile tire tread by abrasion were collected by Andersen sampler with atmospheric dusts. The samples of atmospheric dusts at each stage were analysed for rubber particles by Curie point pyrolysis-gas chromatography with Apiezon grease L column. Pyrolysis was done at 740$^circ$C for 5 seconds. In the pyrogram, NR rubber (bus and truck tire tread) was determined by isoprene peak, and SBR rubber (passenger car tire tread) was determined by styrene peak simultaneously. The size distribution of rubber particles was proportioned with the size of rubber particles. The concentrations of NR and SBR rubber were 0.23 $\mug/m^3$ and 1.31 $\mug/m^3$, respectively, in the atmospheric dusts which were collected from the street in front of Yonsei University on April 1986. The ratio of tire tread rubber in the atmospheric dusts was about 0.63%.

• Journal of the Korean Society for Railway
• /
• v.3 no.3
• /
• pp.161-169
• /
• 2000

AGT(Automated Guide-way Transit System) was introduced to satisfy the every increasing need for improved urban transportation. The AGT system is classified as medium distance and demand capacity mass transit being introduced for such area with inadequate passenger demand for railway construction but excessive demand for bus service. To decrease initial investment cost it is important that we have to secure the technology system of Light Rail Transit for Korea environment. By utilizing the finite element analysis, the result in this paper is enough to satisfy the strength whish is required. Also for the purpose of safety, it is decided the thickness and frame structure of the undeframe section through the analysis. It is known that carbody is no problem for required design conditions.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.455-460
• /
• 2010

Recent increases in the road and rail infrastructure, but the urban traffic problems such as accidents, congestion are increasing. The reason is that the high cost and lack of accessibility of railway transportation, the low quality of road services, and efficient transport links, etc.. The developments of a variety of policy and technical means are being performed to solve these problems. Among them, the Bimodal Tram which is combined low-cost of bus and high service quality of railway transportation is attracting attention. In this paper, the development status of technology and efficient utilization of operational and infrastructure elements for the operational efficiency, safety and passenger comfort of Bimodal Tram is studied.

• Journal of the military operations research society of Korea
• /
• v.12 no.1
• /
• pp.87-105
• /
• 1986

Among the various types of waiting line systems, the elevator servicing system is quite different from the usual queueing system in view of the service characteristics. For example, the FIFO discipline is not always valid depending upon the situation when the direction of first-come customer's is opposite of the operating elevator direction and at that time a later-arrived one has a luck to be served first. In this paper, a simulation model is constructed and tested by the sample data and the results have turned out to be fairly adequate. This model, therefore, will provide a good guide to anyone who is interested in the decision of optimal location selection of no-passenger elevator in high buildings whatsoever. This model is also available, with slight modification, to the problem of city bus dispatching or any other waiting line problems where the servicing equipments are moving.

• Journal of the Korean Society for Railway
• /
• v.8 no.6 s.31
• /
• pp.610-616
• /
• 2005

The Incheon International Airport Express(I'Rex) is the railroad that connects Incheon International Airport, Gimpo Airport and Seoul Station. I'Rex is now under construction, and it will be connected to Gimpo Airport by 2007, to Seoul Station by 2010. However, there has been no discussion on how th connect different routes of railway Systems. Therefore it seems likely that rail passenger demand will be lower than that of limousine bus. Therefor, this paper proposes 4 effective connecting methods for I'Rex - (1) Shuttle transport, (2) Short-distance connecting transport (Inside I'Rex, Seoul Subway Line 9, 'Han-River line') (3) Mid-distance connecting transport (Jung-ang, Tae-baek, Young-dong line) (4) Long-distance connecting transport (Korean Train Express (Korean high speed railroad)) These methods can increase the connectivity of I'Rex with existing railroads and the competition power of I'Rex against a highway.

• Journal of Korean Society of Transportation
• /
• v.23 no.8 s.86
• /
• pp.7-17
• /
• 2005

Transportation is from an individual mobility. Various efforts to propose specific values or the individual mobility have been conducted in diverse transportation environment. However, mobility studies for multimodal public transportation are rare especially on not the range of line but area. This study propose a method to calculate transit mobility indices as expanding mobility analysis from point-to-point to area-to-area, considering access time to transit facility, running time and transfer time of passengers. To extract mobility indices, we included walking as a lowest category of mode and set passenger car as a competitive mode to transit mode. This study propose three public transportation mobility indices as 1) how competitive public transportation facility is offered against passenger car 2) how convenient transit mode including walking is provided against passenger car from origin to destination and 3) how many various paths are presented to support passenger's travel between regions. These indices are tested on the Seoul metropolitan area with 10 lines of urban rail and about 420 lines of bus. In addition, we proposed two political applications of proposed mobility indices to increase public transportation mobility between two regions and to maximize the mobility of study area when a line is added in the area.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.6
• /
• pp.81-91
• /
• 2008

In this study, data collection delay time generated in bus information system is analysed and improvement on system reliability by minimizing the delay time is suggested. To minimize the data collection delay time (call setup time), factors on data collection phase are analyzed. Each connecting time that it occurs from wireless communication during data collection phase, is selected as a main effective variable and a model for selecting an optimum communication point to minimize the effect of data delay time by each connecting time is suggested. In this model, minimization of the point between the time carrying out wireless communication and vehicle moving time, is calculated and the difference between the bus arrival time and information delivered time to the passenger is reduced. The test results for the proposed model in BIS using a CDMA (Code Division Multiple Access) communication show that delay time in real system operation has been improved. The minimum data collection delay time based on optimal communication position leads to the better reliability for Bus Information System. This study can be applied to the selection of optimal communication position and detection position instead of empirical methods.

• Journal of Korean Society of Transportation
• /
• v.30 no.1
• /
• pp.149-159
• /
• 2012

The evaluation of public transit service quality is more complicated than evaluating other aspects of transportation service. Although various measures of effectiveness [MOEs] for transit service have been studied and applied, a more comprehensive and accurate MOE is still required. In the past, either data from user surveys or the experience of bus agency administrators and/or engineers used to measure the quality of service. However, recently, with reliable and accurate real time data from BMS(Bus Management System) and BIS(Bus Information System), more reliable and accurate MOEs are available. This study develops a service evaluation model from users' perspectives, which is based on user' cost models that consider passenger access time, riding time, waiting time, and discomfort due to in-vehicle overcrowding, violation of traffic laws, and accident rate. For validating proposed model, data from the BMS and transit-fare cards (T-Money Card) for Seoul's No. 472 main bus line were used. Models developed in this study provided reliable results.

• Journal of Korean Society of Transportation
• /
• v.26 no.4
• /
• pp.77-86
• /
• 2008

Firstly, this study is to compare two types of productivity changes in Seoul's urban bus industry by public transport reforms: one with considering accident costs (ML), the other without considering accident costs (M). The directional distance function (DDF), which is a form of data envelopment analysis, and the Malmquist (Luenberger) productivity index (ML, M) are used for the analysis. The results show that productivity increased regardless of accident costs over time, and the ML index is a little higher than the M index, which means that most firms experienced more of a reduction ratio of accident costs than a reduction ratio of inputs. Secondly, this paper is to analyze how reforms affect productivity changes. The results show that operational speed improvements or passenger increases most affect productivity increases, which means that the installment of median bus lanes or introduction of free transfers among public transport modes were effective in reducing both inputs and accident costs. However, operational system reforms including mid-public management were related with productivity changes but they were not as effective.

• The Journal of Bigdata
• /
• v.7 no.2
• /
• pp.75-90
• /
• 2022

Recently, complex and sophisticated analysis of transportation is required due to changes in the socioeconomic environment and the development of bigdata technology. Especially, the revision of 3 laws including PERSONAL INFORMATION PROTECTION ACT makes it possible to combine various types of mobility data. But strengthen personal information protection makes inefficiency in utilizing mobility bigdata. In this paper, we proposed the "Virtual fusion methdology via mobility bigdata" which is a methodology for indirect data fusion for various mobility bigdata such as mobile data and transportation card data, in order to resolve legal restrictions and enable various transportation analysis. And we also analyzed regional bus passenger in Seoul capital area and Cheongju city with aforementioned methodology for verification. This methdology could analyze behavioral pattern of passenger with the MCGM(Mobility Comprehensive Genetic Map), graph with position and time, making with mobile data. Consquently, using MCGM, which is a result for indirect data fusion, makes it possible to analyze various transportation problems.