• Journal of Ocean Engineering and Technology
• /
• v.16 no.2
• /
• pp.53-59
• /
• 2002

This paper shows the experimental results controlling the height of surface and back bead in GMAW by analyzing the unexpected gaps between base metals produced in welding and by controlling welding velocity due to the variation of the gap between base metals in thin-plate welding. The back bead behavior and burn-through in I-type butt joint $CO_2$ welding of thin mild steel are analyzed in the views of short circuit time ratio and short circuit frequency. It is shown through experimental consideration that the short circuit time ratio method is more reasonable than the short circuit frequency method in analyzing the formulation of back bead under changing the gap between base metals. Based on the these results, welding manipulator is designed so as to satisfy the bead height control in real time by measuring the short circuit time ratio. To show the effectiveness of the developed bead formulation control system, the experiment is implemented under two welding conditions such as increasing gap from 0mm to 0.8mm and gradually increasing gap from 0mm to 1.2mm. The experimental results show that the bead formulation can be controlled uniformly in spite of the variation of the gap between base metals.

• Child Health Nursing Research
• /
• v.4 no.1
• /
• pp.97-104
• /
• 1998

Burns in children result in the loss of precious life, or if the child survives, in much suffering from physical, emotional, social, and economic problems. These burn accidents to children happen in the bustle of family life and frequently without any warning. With this background information, this study was designed to identity types of burns in children and mothers' attitudes towards, and knowledge of burn prevention, in order, to not only, in still a safety consciousness regarding the seriousness of burn accidents and the strengthening prevention, but also as basic data towards the development of an educational program aimed at prevention. From May 1 to May 25 in 1997, data were collected from the mothers of children attending five day care centers and kindergartens located in Seoul, which had been selected for the study. The tools used for the study, which were developed by the researchers, surveyed the type of burns suffered by children, mothers' knowledge of burns and attitudes toward burn accidents. The data were analyzed through real numbers percentages and analysis was done using SPSS computer programs. The results of the study show that the most frequent type of burn accidents were those caused by hot water(55.4%) and these were frequently related to everyday habits that easily lead to danger. Further, the first aid treatment following a burn was weak. The majority of the mothers had not instructed their children on who to contact in the case of a fire, first aid for burns, or how to take escape in the case of a fire. This left the children in a defenseless position in case of a fire. The mothers showed a lack knowledge, on what to do when a blaze is discovered, how to put out a fire, first aid for burns, escaping from a fire and appropriate water temperature, in that 50% of the time they answered incorrectly. From this study a prevention program, HIPP (Home Injury Prevention Program) could be developed that includes fire prevention habits and first aid for burns. This program can be used with kindergarten and elementary school children for group education on fire prevention and can be used as a foundation for construction of a system of facilities and equipment to prevent fires and also prevent injury from fires.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.36 no.3
• /
• pp.111-115
• /
• 2014

Purpose: This study evaluated powdered burn wound dressing materials from wild silkworm fibroin in an animal model. Methods: Fifteen rats were used in this experiment. Full-thickness $2{\times}2cm$ burn wounds were created on the back of rats under anesthesia. In the two experimental groups, the wounds were treated with two different dressing materials made from silkworm fibroin. In the Control Group, natural healing without any dressing material was set as control. The wound surface area was measured at five days, seven days and 14 days. Wound healing was evaluated by histologic analysis. Results: By gross observation, there were no infections or severe inflammations through 14 days post-injury. The differences among groups were statistically significant at seven days and 14 days, postoperatively (P<0.037 and 0.001, respectively). By post hoc test, the defect size was significantly smaller in experimental Group 1 compared with the Control Group and experimental Group 2 at seven days postoperatively (P=0.022 and 0.029, respectively). The difference between Group 1 and Group 2 was statistically significant at 14 days postoperatively (P<0.001). Group 1 and control also differed significantly (P=0.002). Group 1 showed a smaller residual scar than the Control Group and Group 2 at 14 days post-injury. Histologic analysis showed more re-epithelization in Groups 1 and 2 than in the Control Groups. Conclusion: Burn wound healing was accelerated with silk fibroin spun by wild silkworm Antheraea pernyi. There was no atypical inflammation with silk dressing materials. In conclusion, silk dressing materials can be used for treatment of burn wound.

• Journal of Society of Preventive Korean Medicine
• /
• v.17 no.2
• /
• pp.105-127
• /
• 2013

Objectives : We examined the use of the moxibustion through survey on Korean Medicine Doctors (KMDs) on preparation of universal moxa product standard by fully reflecting opinions of practitioners and the industry. Methods : The questionnaire is composed of 25 questions including use of indirect moxa, side effects, complaints and improvements, general characteristics and so on, and were responded by 1,588 KMDs. For statistics, frequency analysis, chi-square analysis, T-test and ANOVA were conducted using SPSS 12.0 for windows, and the significance level was 0.05. Results : In this research, 91% of the responded KMDs was using moxibustion, and the proportion of using mediate moxibustion was shown as 63.2%. They used mediate moxibustion for side effects of direct moxa method such as risk of burn, ease of use, control of stimulation and so on. And it was mostly being conducted to women and 40 ages. Most respondents gave moxibustion treatments for the purpose of thermal stimulation on acupoint to musculoskeletal diseases. Most respondents were treating 1~2 pieces of moxibustion to patients by moxibustion points to those of 1~2 regions every time within 10 minutes. Regarding the frequency of side effects of mediate moxibustion, within 3% of respondents had experienced side effects, and the types were burn, flare and itchiness, odor and smoke. The dissatisfaction of mediate moxibustion products was moderate(2.00 out of 5 point scale), and went up public health doctors, the younger ages and the shorter clinical experience. Complaints on mediate moxibustion products were serious odor, poor attachment, risk of burn etc. Regarding ways to improve mediate moxibustion, the expansion of moxibustion's insurance cost carne out highest, followed by preparation of manual on efficacy, strengthening of training, acquiring evidence on efficacy, diversification of specifications, safety improvement, quality improvement of mediate moxibustion products. Conclusions: Many KMDs use for ease of use and give moxibustion treatments for thermal stimulation but they complain about safety, efficacy and quality of mediate moxibustion. After this it is considered that we have to elevate therapeutic effect through the improvement of mediate moxibustion products.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.22 no.3
• /
• pp.261-268
• /
• 2004

Analysis on forest through satellite image data can be obtained from normalized burn ration (NBR) and normalized difference vegetation index (NDVI) from descriptive information of reflection on the earth's surface recorded each waveband. This study focuses on the efficiency of NBR through comparative analysis after obtaining NBR and NDVI of images form 1 you, 2 years and just after the forest fire and the time of forest-preserved of the area before the forest fire in Sacheon myeon, Cangneung City where the forest fro broke out. As a result, it shows dynamic changes with greater range that differences between NBR images rather than differences between NDVI images, which means it would be better to use NBR image for the analysis of the degrees of damages from forest fire or the status of vegetation restoration and also NBR image more distinctly shows both than NDVI image in forest fro damage area.

• Transactions on Electrical and Electronic Materials
• /
• v.5 no.4
• /
• pp.138-142
• /
• 2004

This paper presents the improved bum-in method for the reliability of SRAM in Multi Chip Package (MCP). Semiconductor reliability is commonly improved through the bum-in process. Reliability problem is more significant in MCP that includes over two chips in a package, because the failure of one chip (SRAM) has a large influence on the yield and quality of the other chips - Flash Memory, DRAM, etc. Therefore, the quality of SRAM must be guaranteed. To improve the quality of SRAM, we applied the improved wafer level bum-in process using multi cells selection method in addition to the previously used methods. That method is effective in detecting special failure. Finally, with the composition of some kind of methods, we could achieve the high quality of SRAM in Multi Chip Package.

• Textile Coloration and Finishing
• /
• v.33 no.4
• /
• pp.338-347
• /
• 2021

In the case of occlusive dressings currently used in dressings for burn treatment, it is impossible to confirm the replacement time, so replacement is delayed, resulting in additional infection. To solve this problem, liposomes capable of bacterial sensing were prepared using 5(6)-Carboxyfluorescein, Phosphatidylcholine, 1,2-Dipalmitoyl-sn-glycero-3-phosphocholine, Cholesterol, and 10,12-Tricosadiynoic acid. In this study, evaluation of changes in drug encapsulation rate in liposomes according to changes in three types of phosphatidylcholine phospholipids during liposome production, high-performance phosphatidylcholine phospholipids selected through vesicle size analysis, low and high temperature stability evaluation, bacterial sensitization ability evaluation, animals cell responses were assessed.

• Proceedings of the KWS Conference
• /
• 2001.10a
• /
• pp.15-18
• /
• 2001

• Journal of Welding and Joining
• /
• v.13 no.4
• /
• pp.75-84
• /
• 1995

In GMA welding of sheet metal, the short circuit metal transfer mdoe is preferred because of its low heat input and capability of bridging the root gap. The molten electrode is transferred to the workpiece during repectitive short circuit in the model. The waveform of welding current or voltage and the frequency of short circuiting are affected by a number of factors including: magnitude of welding current and voltage, root gap, electrode extension, power supply characteristics, and so on. In this study experimental models were proposed, which are able to determine the relationship between the root gap and short circuit frequency and the relationship between the root gap and appropriate welding speed that produces the good quality of back bead without burn through. Using the experimental models, the root gap can be obtained from measuring the short circuit frequency, and then the appropriate weldig speed to the root gap can be determined. Thus a back bead control system was constructed by controlling the welding speed for maintaining the quality of back bead. The developed system has shown the successful capability of back bead control.

• Korea Journal of Hospital Management
• /
• v.17 no.4
• /
• pp.167-187
• /
• 2012

Organizational growth is achieved through the process of finding opportunities in the environment and establishing a business model with internal and external resources. Bestian Hospital, which primarily focuses on saving the lives of patients with severe burns, has enlarged its business domain through deep understanding of burn patients' problems, including pain and complications during treatments, long-term treatments, skin reconstruction, and so on. Now Bestian is accelerating research for development of antipyretics and cosmetics for burn patients. The success of Bestian has been due to utilization of human and material resources that are essential to performance in the medical field. Also, Bestian properly used a management service organization(MSO) model and constructed an information technology(IT) system for supporting its businesses. However, previous successes do not guarantee continued success. Bestian is entering a new domain with different challenges than it has experienced so far, and how it deals with these challenges will decide its future.