• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 C
• /
• pp.1992-1994
• /
• 2005

In this study, Bragg reflector was formed as tungsten(W) and $SiO_2$ deposited by RF magnetron sputtering according to variable conditions of RF power and working pressure to apply to the SMR type FBAR device, one of the next generation mobile communication devices. The micro-structural properties such as a crystal orientation, roughness and micro- structure were measured by XRD, AFM and SEM and the best condition of Bragg reflector was elicited with analyzing that results of the thin films about each conditions. Finally, FBAR device was fabricated with applying the Bragg reflector was formed on the best condition and measured the resonance properties and compared other research and considered it.

• 통합자연과학논문집
• /
• 제4권3호
• /
• pp.192-196
• /
• 2011

New method to encode multiple photonic features of Bragg type reflector on silicon wafer has been investigated. Multiple bit encodes of distributed Bragg reflector features have been prepared by electrochemical etching of crystalline silicon by using various square wave current densities. Optical characterization of multi-encoding of distributed Bragg reflectors on porous silicon was achieved by Ocean optics 2000 spectrometer for the search of possible applications of multiple bit encoding of distributed Bragg reflectors such as multiplexed assays and chemical sensors. The morphology and cross-sectional structure of multi-encoded distributed Bragg reflectors was investigated by field emission scanning electron micrograph.

• 한국광학회지
• /
• 제28권5호
• /
• pp.229-235
• /
• 2017

U형 구조의 SGDBR (Sampled Grating Distributed Bragg Reflector) 레이저 다이오드를 설계하고, 시간 영역 시뮬레이션 방법으로 해석하였다. U형 구조의 SGDBR 레이저 다이오드는 SGDBR, 능동, 수동, TIR (Total Internal Reflection) 거울 영역들로 이루어져 있어서, 각 영역들 간의 결합 손실의 영향을 면밀히 고려하여야 한다. 설계된 U형 SGDBR 레이저 다이오드의 파장 가변범위는 1525 nm에서부터 1570 nm로서 시뮬레이션을 통하여 확인하였다. 설계 튜닝 범위에서 완전한 레이저 다이오드 특성을 얻기 위해서는, 미러 영역에서의 손실은 약 2 dB 이하이고, 능동 및 수동 영역 간 butt 결합에서의 매질 간 굴절률 차이는 0.1 이하를 유지하도록 도파 구조가 설계되어야 한다.

• 한국전자통신학회논문지
• /
• 제16권2호
• /
• pp.241-246
• /
• 2021

본 연구에서는 수소화 비정질 실리콘 (a-Si:H) 기반 분배 브래그 반사기 (Distributed Bragg Reflector, DBR)을 적용한 광 격자 커플러를 제안하여 라이다 시스템에서 고효율의 나노 광 방사기로 사용할 수 있다는 가능성을 보여주었다. 분배 브래그 반사기는 아랫방향으로 누설되는 광학 장을 감소시켜 커플링 효율을 높게 한다. 결과적으로 제안된 광 격자 커플러는 기존의 광 격자 커플러와 비교하여 약 1.4 배가 높은 far-field 세기를 가진다는 것을 보여주었다.

• Journal of the Optical Society of Korea
• /
• 제15권2호
• /
• pp.118-123
• /
• 2011

A novel triangular-shaped plasmonic metal-insulator-metal (MIM) Bragg grating waveguide is introduced, whose band-gap is narrower than that of the conventional step type and wider than that of the sawtoothshaped one. Moreover apodized triangular-shaped MIM Bragg grating structures are proposed in order to reduce the side lobes of the transmission spectrum, because the Bragg reflector with a sawtooth profile has a smoother transmission spectrum than that of a triangular-shaped one. The performance of the proposed structures is simulated by using the finite difference time domain method.

• Journal of Biosystems Engineering
• /
• 제34권4호
• /
• pp.260-268
• /
• 2009

As a basic study to develop a high sensitive biosensor using film bulk acoustic resonator, the mathematical model for analyzing the resonance characteristics of bulk acoustic resonator with acoustic Bragg reflectors was investigated. The simulation results due to the number of acoustic Bragg reflectors with low and high acoustic impedance materials were compared with the experimental results for 1, 2.25 and 5 MHz of PZT based bulk acoustic resonators with various acoustic Bragg reflectors. At the fabricated bulk acoustic resonator with an odd number of acoustic Bragg reflectors, low and high acoustic impedance materials in sequence under the bottom electrode showed better resonance characteristics than even number of acoustic Bragg reflectors. The changes of resonance frequencies due to the increase of number of acoustic Bragg reflectors by simulation and experiment, respectively showed approximately similar tendency but some differences in input impedance between the experiment and simulation were found. The derived mathematical model for describing the resonance characteristics of the bulk acoustic resonator with acoustic Bragg reflector will be available for analyzing the design parameters for development of biosensor using bulk acoustic resonator.

• 한국전기전자재료학회논문지
• /
• 제17권1호
• /
• pp.16-20
• /
• 2004

We present the fabrication and performance of wavelength tunable butt coupled (BT) sampled-grating (SG) distributed bragg reflector (DBR) - planar buried heterostructure (PBH) laser diodes (LD). The fabricated LD showed the high optical output power due to the high coupling efficiency between active and passive components by the BT coupling methods. The series resistance and diode ideality factor of LD were measured to be 3.7 $\Omega$ and 1.35, respectively. The average threshold current was 25 ㎃. The output powers of BT-SG DBR-PBH-LD were obtained to be as high as 12.3 and 24.56 ㎽ at 100 and 200 ㎃, respectively. The maximum wavelength tuning range was about 31 nm and the side mode suppression ratio was about 37 dB.

• 한국결정성장학회지
• /
• 제19권6호
• /
• pp.293-297
• /
• 2009

본 연구에서는 p형 단결정 규소 기판을 에칭시켜 다층구조를 갖는 DBR 및 Microcavity 다공질규소를 제작하고, 그 반사율 스펙트럼을 조사하였다. 그 결과 다층구조를 갖는 다공질규소의 반사율 스펙트럼에서 프린지 패턴의 수는 단일층 다공질규소의 경우보다 상대적으로 많았으며, 특정 파장에서 반사율은 90 % 이상으로 나타났다. 그리고 DBR 다공질규소에서 최대 반사율 봉우리의 FWHM 값은 33 nm로 매우 좁게 나타났다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2005년도 춘계종합학술대회
• /
• pp.371-375
• /
• 2005

In this paper, the resonance characteristics of ZnO-based FBAR devices are compared. Several FBAR device samples were fabricated by using three different annealing methods while one sample remained non-annealed as a reference for comparison. Resonance characteristics could be significantly improved by both Bragg reflector-annealing and/or post-annealing steps. Especially, the use of two-step annealings resulted in most desirable resonance characteristic improvement compared with the Bragg reflector-annealing or post-annealing step alone.

• Journal of information and communication convergence engineering
• /
• 제3권1호
• /
• pp.23-27
• /
• 2005

In this paper, the effects of various annealing conditions on the resonance characteristics of ZnO-based FBAR devices are compared. Several FBAR device samples were fabricated by using three different annealing methods while one sample remained non-annealed as a reference for comparison. Return loss ($S_11$) could be significantly improved by both Bragg reflector-annealing and/or post-annealing. Especially, the use of the combined annealings resulted in most desirable resonance improvement compared with the Bragg reflector-annealing or post-annealing method alone.