• Geophysics and Geophysical Exploration
• /
• v.11 no.1
• /
• pp.60-67
• /
• 2008

In this paper we consider an application of the method of electromagnetic (EM) migration to the interpretation of a typical marine controlled-source (MCSEM) survey consisting of a set of sea-bottom receivers and a moving electrical bipole transmitter. Three-dimensional interpretation of MCSEM data is a very challenging problem because of the enormous number of computations required in the case of the multi-transmitter and multi-receiver data acquisition systems used in these surveys. At the same time, we demonstrate that the MCSEM surveys with their dense system of transmitters and receivers are extremely well suited for application of the migration method. In order to speed up the computation of the migration field, we apply a fast form of integral equation (IE) solution based on the multigrid quasi-linear (MGQL) approximation which we have developed. The principles of migration imaging formulated in this paper are tested on a typical model of a sea-bottom petroleum reservoir.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.2
• /
• pp.89-97
• /
• 2003

Experimental model studies were carried out to evaluate the end condition for drilled shafts by applying elastic impact on the top of the shaft, which is one of the various methods using stress waves. Typical impact responses corresponding to the various end conditions including free, fixed, rock-socketed, and soft-bottom with good and poor side contact conditions, were investigated. In order to simulate these renditions, mock-up shaft models made of cement mortar were used. Small-scale laboratory experiments were also performed, and field tests were carried out for the shafts that were socketed into weathered rock. It is found that the rock-socketed condition and depth of penetration into rock ran be identified from the reflection at the interface between the soil and rock in the waveform. The soft bottom rendition can be identified, only when the side contact between shaft and surrounding rock is poor, whereas it cannot be identified when the side contact is good because the waveform is similar to that of fixed end rendition.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.11
• /
• pp.1399-1409
• /
• 2005

The purpose of this study was to analyze the shape of gathered skirts using a three-dimensional measurement system. And in this experiment, I try to accumulate three-dimensional data of wearing model and to figure out analyzing method made by shape of clothes. The experimental design consists of two factorial designs. I set up three different kinds of fabrics, ratio of gathers. Therefore nine samples were made. The instrument and tools for three-dimensional measurement was whole body 3D scanner. Analysis program used in experiment is RapidForm 2004 PP1 and Pattern Design 2000. Data analysis utilizes SPSS WIN 10.0 Package. T-test to effect an inspection of evidence, there was difference about measurement times. One-way ANOVA to analysis effect of gather made by gathering conditions. The following results were obtained; 1. As a result of inspecting an error several times using a three-dimension measurement system, convinced data was obtained. 2. At front, distribution of gap amount was larger than back. And as ratio of gathers increased, distribution of gap amount showed regularly. 3. After analyzing horizontal sectional figure of skirts, as a height of skirt changed from waist to the bottom of skirts, the results showed as follows. While section width, section thickness, node width, node depth increased, node count decreased. 4. With the horizontal section levels of gather skirt, the silhouette on middle hip section was similar with the silhouette of body line. And as ratio of gathers around hip section increased, nodes showed regularly. At the bottom of skirts showed different nodes by different gathering condition.

• International Journal of Highway Engineering
• /
• v.10 no.2
• /
• pp.167-181
• /
• 2008

A pavement structure analysis model plays a very important role which can correlate input variables to performance models. In this research, a standard shell element model was developed by use of the ABAQUS program so that behaviors of concrete pavements be analyzed. The model was verified in terms of its accuracy by way of comparing the results to those gathered from closed-form Solutions, the Everfe program, and the ABAQUS program with a solid model. Many input variables were analyzed in the model, and the results were stored in a database. Based on the SPSS program, stress equations with respect to temperature and curling effects were developed. All models gave over 0.90 of R2 value except the case considering top-down curling (R2=0.86)

• Journal of Korea Water Resources Association
• /
• v.47 no.12
• /
• pp.1177-1185
• /
• 2014

This study suggests a new hydrostatic pressure distribution corrected for nonuniform flow over a channel of large slope. For analyzing shallow-water flows over large slope accurately, it is developed a finite-volume model incorporating the pressure distribution to the shallow water equations. Traveling speed of the hydraulic jump downstream a parabolic bump in the drain case is quite reduced by the weakened bottom gradient source term in the model with the pressure correction. In simulating the dam-break flow over a triangular sill, it is identified that the model with pressure correction could capture the water surface by the digital imaging measurements more than the model without that. Due to the pressure correction decreasing the reflected flows on and increasing overflows over the sill, there are good agreements in the experiment and the simulation with that. Therefore, this model is expected to be applied to such practical problems as flows in the spillway of dam or run-up on the beach.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.13 no.2
• /
• pp.27-38
• /
• 2018

Since the Korean economic development path has been unique compared to other counties, it is necessary to build an incubation ecosystem matching with unique economic environment in Korea. In order to revive the dynamism of the economy, establishment of the incubator ecosystem should be a policy priority so that ventures with innovative ideas and challenging minds can grow into a global stage. The purpose of this study is to derive the policy implications for establishing ecosystem and infrastructure by comparing to other OECD countries such as US, Israel, Finland, and Japan that can offer meaningful policy implications to Korea. For this purpose, the most appropriate model for explaining the incubation ecosystem in Korea was designed. PCII Model (People, Capital, Incubating, Infra) has 4 elements. It provides a framework for incubation of entrepreneurship, funding for start-up, incubation course, establishment of business foundation infrastructure. The comparative analysis was conducted with 12 sub-items under 4 elements and qualitative and quantitative evaluations were performed for each category. As a result of the comparative analysis, Korea's incubation policy seems to be still in the initial stage in terms of establishment of ecosystem compared to other countries. Therefore, a systematic approach based on the ecosystem model is needed other than the short-term incubation policy.

• Review of Korean Society for Internet Information
• /
• v.14 no.4
• /
• pp.63-76
• /
• 2013

This short report introduces the general background why Brazil conference is being prepared and what topics would be undertaken and what goals are being taken into account. It overviews what differences from traditional telecommunication governance, internet governance has had in its historical development and how such differences had been formed from its technological differences and the regulatory policy shift from common carrier regulation to privatization. Moreover, the fact that open, voluntary, bottom-up, diverse stakeholder's participation had evolved throughout the historical development of the internet, had established the present multistakeholder governance model from technological standardization to addressing scheme policies. ICANN, which has governed internet addressing schemes since the earlier 2000s, had developed address policies including IANA function from Jon Postel and technical community's legacy management system into contract based formation between ICANN and gTLD, ccTLD registries. And it made dispute resolution policies responding to trademark disputes and resolved gTLD monopoly issue by introducing new TLD generation and the separation of registry and registar. However, there had been challenges on the legitimacy of ICANN due to its dependency on the Federal Government of the U.S. particularly in its oversight role over ICANN and IANA contract. WSIS raised up internet governance issues including addressing governance, and set up IGF as a discussion platform for multistakeholders to discuss and share all views on other internet related public policies. IGF's loose and non-binding discussion once frustrated governments and other stakeholders, but more focused discussion and visible outcomes have consolidated its unique role for internet governance discourses. Particularly, IGF addressed many emerging internet related issues like cybersecurity, privacy, net neuratlity, development related issues. WTPF of 2013, after WCIT debate on whether traditional telecommunication regulation could be applied to internet infrastructure, suggested other governance issues such as the transition to ipv6, IXP coordination etc. How to make sure the legitimacy of internet addressing governance and how and where other internet related public policies could be undertaken are fundamental tasks for internet governance. Brazil conference, which has been motivated by the breakdown of trust in internet governance from NSA mass surveillance revealed by Snowden, faces these questions and try to make consensus on principles, institutions and roadmap for internet governance in multistakeholder participation way.

• Journal of the Korean Geotechnical Society
• /
• v.18 no.4
• /
• pp.21-32
• /
• 2002

Small and full scale model tests were performed to obtain the transient responses of shafts subjected to elastic impact by impact-echo test. Four end conditions of drilled shafts were considered: (1) free, (2) fixed, (3) rock-socketed, and (4) soft bottom. In small scale model tests, mock-up shafts were fabricated to simulate these four drilled shafts using poly-urethane and plastic material. Additionally, skin frictions between shaft and rock were changed to find out the effect of side contact on dynamic responses. All impact responses were tested in the air. Subsequently, full scale model tests were also carried out on concrete shafts that were in free and rock-socketed condition. The end conditions of the drilled shafts could be identified with good reliability by the waveforms from both small and full scale model tests. The results obtained in this study will provide an improved understanding of the impact responses for end conditions, especially for rock-socketed drilled shafts that are frequently designed and built in Korea.

• Journal of Environmental Impact Assessment
• /
• v.22 no.6
• /
• pp.667-676
• /
• 2013

This study analyzed the energy demand, greenhouse gas emission and greenhouse gas reduction potential of Electronic Electrical components company. The LEAP model targeting long term energy plan was used to establish the most efficient plan for the companies by examining the climate change policy of government and the countermeasures by companies. A scenario was created by having 11 greenhouse gases reduction plans to be introduced from 2011 as the basic plan. Regarding input data, energy consumption by business place and by use, number of employee from 2009 to 2012, land area and change in number of business places were utilized. The study result suggested that approximately 13,800 TJ of energy will be spent in 2020, which is more than 2 times of 2012 energy consumption. When the integrated scenario based on the reduction plan of companies would be enforced, approximately 3,000 TJ will be reduced in 2020. The emission of greenhouse gases until 2020 was forecasted as approximately 760,000 ton $CO_2eq$. When the integrated scenario would be enforced, the emission will be approximately 610,000 ton $CO_2eq$, which is decrease by approximately 150,000 ton $CO_2eq$. This study will help the efficient responding of eElectronic Electrical components company in preparing detail report on objective management system and enforcement plan. It will also contribute in their image as environment-friendly companies by properly responding to the regulation reinforcement of government and greenhouse gases emission target based on environment policy.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.5
• /
• pp.2419-2423
• /
• 2012

Context: Genuine community participation does not denote taking part in an action planned by health care professionals in a medical or top-down approach. Further, community participation and health education on breast cancer prevention are not similar to other activities incorporated in primary health care services in Iran. Objective: To propose a model that provides a methodological tool to increase women's participation in the decision making process towards breast cancer prevention. To address this, an evaluation framework was developed that includes a typology of community participation approaches (models) in health, as well as five levels of participation in health programs proposed by Rifkin (1985&1991). Method: This model explains the community participation approaches in breast cancer prevention in Iran. In a 'medical approach', participation occurs in the form of women's adherence to mammography recommendations. As a 'health services approach', women get the benefits of a health project or participate in the available program activities related to breast cancer prevention. The model provides the five levels of participation in health programs along with the 'health services approach' and explains how to implement those levels for women's participation in available breast cancer prevention programs at the local level. Conclusion: It is hoped that a focus on the 'medical approach' (top-down) and the 'health services approach' (top-down) will bring sustainable changes in breast cancer prevention and will consequently produce the 'community development approach' (bottom-up). This could be achieved using a comprehensive approach to breast cancer prevention by combining the individual and community strategies in designing an intervention program for breast cancer prevention.