• 한국안전학회지
• /
• 제33권5호
• /
• pp.109-119
• /
• 2018

This study has performed to identify the effect of safety behavior, safety climate and its satisfaction through the Behavior Based Safety Program for 5 sites of the same Company. The study result indicated that the level of recognized safety behavior, climate and its satisfaction improved by conducting observation of worker behavior, jobsite feedback, displaying feedback chart, safety training, behavior modification committee. Additionally, the participation level of safety activity and conformity level of safety rule improved. The recognized level of safety climate improved together with recognized safety value by management, safety participation of direct boss, communication with each other to be dealt with safety matter, safety training material to be contained unsafe behavior and practical hazard, understanding and conducting safety standard. In addition, The recognized level of satisfaction improved together with safety behavior and climate. As a result, this program provided an opportunities to correct worker's unsafe behavior to safe behavior in conjunction with increasing number of observation, providing additional time to have a safety check, safety suggestion to improve work situation and a permit to work rule. It will be integrated into health and safety management system to be able to reduce industrial accident.

• 노동경제논집
• /
• 제40권4호
• /
• pp.61-89
• /
• 2017

본 연구는 여성관리자패널조사(Korean Women Manager Panel)를 이용하여 한국 여성 근로자의 직장 내 스트레스 및 승진에 상사의 성별이 미치는 영향을 분석한다. 분석결과 직속 상사가 여성일 때 여성 근로자의 직장 내 스트레스는 높았고, 사원 및 대리 직급 여성의 승진에 부의 영향을 미치는 것으로 나타났다. 여왕벌 현상과 역할일치이론에 따르면 한국과 같이 유리천장이 견고하고 상위 직급의 남성 밀집도가 높은 구조에서는 여성 리더십의 긍정적인 특성이 발휘되기보다 다른 여성에 대해 높은 인정 기준을 요구하거나 경쟁적인 모습을 보여 여성 상사를 둔 여성 근로자의 직장 내 스트레스는 높고 낮은 직급의 여성 승진확률은 낮추는 것으로 해석할 수 있다.

• 대한조선학회논문집
• /
• 제36권3호
• /
• pp.15-21
• /
• 1999

KRISO 300K VLCC 이중모형선 주위의 유동특성을 풍동실험을 통해 연구하였다. 선체 선미 주위유동과 후류유동의 평균속도 성분, 난류강도, 레이놀즈 전단응력 및 난류 운동에너지 분포를 열선풍속계를 이용하여 측정하였다. 실험은 선미와 후류의 횡단면에서 수행하였으며, 선체 표면에서의 유동 패턴을 정성적으로 조사하기 위하여 유막법을 이용한 유동가시화도 수행하였다. 선미와 근접 후류영역은 매우 복잡한 3차원의 유동특성을 가지고 있으며, 특히 종방향 와류영역에서 고리 모양의 후류 구조를 볼 수 있었다. 그리고 중앙평행부에서의 얇은 경계층은 선미 영역을 지나며 점차 두꺼워지고 복잡한 3차원 난류후류로 발전하였다.

• 한국CDE학회논문집
• /
• 제11권2호
• /
• pp.77-87
• /
• 2006

It is necessary to change the existing design process to cope with a short life-cycle product and various customer's demands. Also a frequent design change may delay the whole design process and it will increase the unit cost of the production. New alternatives or techniques have emerged to solve the existing design problems, such as a knowledge based engineering, an intelligent CAD, a function based design, and so on. In this paper, we propose a hybrid design system with a knowledge based design methodology and a function based design technique. The knowledge based design is good at a frequent design change and the function based design is effective to extract a core design behavior. In an early design process, the system utilizes a core design behavior through the function based design process. On the other hand, the system manages complicated design issues with the knowledge based design technique in the detailed design process. We conclude that the hybrid design system can bring fair effects on implementing an efficient design environment in aspect of time and expense.

• Advances in Traditional Medicine
• /
• 제7권2호
• /
• pp.150-156
• /
• 2007

Bacopa monnieri is being used in the traditional system of medicine for a variety of ailments. In the present study, the ethanolic extract of Bacopa monnieri aerial parts has been studied for its wound healing activity using various models in rats. Significant increase in wound contraction and skin breaking strength were observed in the excision and incision wound models respectively. There was also significant increase in hydroxyproline content, DNA content, superoxide dismutase activity, catalase activity, glutathione level and decrease in the level of thiobarbituric acid reactive substances in the $12^{th}$ day post wounding tissue of experimental rats in the ethanol extract treated groups with respect to the control group. The effect of the extract was found to be comparable with the standard drug nitrofurazone. From the results it may be concluded that the plant Bacopa monnieri is endowed with significant wound healing activity, thereby justifying its use in the traditional medicine. Saponins may be responsible for the observed wound healing activity.

• Composites Research
• /
• 제14권3호
• /
• pp.10-17
• /
• 2001

복합재료 압력용기를 개발하기 위하여 설계, 제작, 시험을 연계한 연구가 수행되었다. 섬유의 와인딩 패턴 및 각도는 CADFIL 코드를 활용하여 결정하였고, 그 각도는 [$liner/15^{\circ}/15^{\circ}/90^{\circ}/18^{\circ}/90^{\circ}/21^{\circ}/21^{\circ}/90^{\circ}$] 이었다. 압력용기의 제작은 5축 필라멘트 와인딩기를 활용하여 이루어졌다. 제조 공정 중에 광섬유 센서를 매립하여 내부 압력이 가해질 때 각 지점에서 스트레인을 측정하였다. 광섬유가 실험적으로 사용된 반면에 일반적으로 적용하는 스트레인 게이지를 부착하여 안정적인 시험결과를 확보하였다. 가압 시험결과는 유한요소 해석 결과와 비교하였고 그 결과는 유사한 일치를 보여주었다. 이 과정을 통하여 개구부 한개를 지닌 복합재료 압력용기의 설계, 제작 및 시험평가가 성공적으로 이루어져 제조기술의 확보가 가능하였다.

• 한국기계가공학회지
• /
• 제15권6호
• /
• pp.24-34
• /
• 2016

To attach a fuel tank to an excavator, two sets of mounting plates on which three bosses are attached are welded onto the tank. In this study, the welding process of a fuel tank for an excavator was modeled using a finite element numerical method. The tank was modeled as a simple plate to which the mounting plate or bosses were attached by fillet welding. Thermal and thermo-elasto-plastic analyses of the welding process were carried out to predict the temperature distribution and material distortion during welding, respectively. Three different welding sequences for the tank were also modelled to compare the deformation that occurred due to each welding sequence. The results of the analysis predicted that changing the welding sequence around the mounting plate could not position the boss within the allowable dimensional range. The results also revealed the sequence in which the maximum distortion of the bosses welded onto the tank was 30% less than the maximum distortion due to the other sequences.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회/대한산업공학회 2003년도 춘계공동학술대회
• /
• pp.194-199
• /
• 2003

Developed m this research is a production information system for marie propellers. The paper deals with surface modeling and tool path generation modules of the system. Since the input point data may have some errors, the data is examined using the 2nd divided difference. The point data is interpolated to a $G^2$ chord-length spline surface with some end-conditions. The effects of the various end-conditions on the interpolated surface are discussed in the paper. The tool paths for blade, fillet, and boss of the propeller are generated. Some illustrative examples from an industry are presented.

• International Journal of Railway
• /
• 제4권3호
• /
• pp.57-63
• /
• 2011

The main purpose of this study is to highlight the effects of the Bolman and Deal's multi-frame leadership on the several dependent variables such as job satisfaction, respect from subordinates, effective goal attainment, promotion speed, and recognition as more a leader than a manager. To attain this purpose, 488 questionnaires verified to be free from flaws were processed through SPSS 14 Windows. The major finding was that versatile and adroit use of multiple frames can contribute to the effectiveness and success of the leader. That is, the multi-frame leadership had strong relationships with dependent variables such as trust and respects from subordinates, effective attainment of unit's goal, job satisfaction, recognition as more a real leader than as a manager, and promotion speed of boss. When we consider the ever-increasing environmental complexity surrounding every organization and the growing levels of needs of employees, the use of multi-frame leadership is not an 'ought' but a 'must' for all the people who aspire to become effective and successful leaders.

• 대한기계학회논문집A
• /
• 제32권1호
• /
• pp.54-62
• /
• 2008

In this paper the fretting wear of press-fitted specimens subjected to a cyclic bending load was simulated using finite element analysis and numerical method. The amount of microslip and contact variable at press-fitted and bending load condition in a press-fitted shaft was analysed by applying finite element method. With the finite element analysis result, a numerical approach was applied to predict fretting wear based on modified Archard's equation and updating the change of contact pressure caused by local wear with influence function method. The predicted wear profiles of press-fitted specimens at the contact edge were compared with the experimental results obtained by rotating bending fatigue tests. It is shown that the depth of fretting wear by repeated slip between shaft and boss reaches the maximum value at the contact edge. The initial surface profile is continuously changed by the wear at the contact edge, and then the corresponding contact variables are redistributed. The work establishes a basis for numerical simulation of fretting wear on press fits.