DOI QR코드

DOI QR Code

Analysis of Welding Distortion during the Production of Fuel Tanks for Excavators

연료탱크 제작시 시뮬레이션을 통한 용접변형 해석

  • 양영수 (전남대학교 기계공학과) ;
  • 김덕윤 ((주)명진기업) ;
  • 배강열 (경남과학기술대학교 메카트로닉스공학과)
  • Received : 2016.08.24
  • Accepted : 2016.09.13
  • Published : 2016.12.30

Abstract

To attach a fuel tank to an excavator, two sets of mounting plates on which three bosses are attached are welded onto the tank. In this study, the welding process of a fuel tank for an excavator was modeled using a finite element numerical method. The tank was modeled as a simple plate to which the mounting plate or bosses were attached by fillet welding. Thermal and thermo-elasto-plastic analyses of the welding process were carried out to predict the temperature distribution and material distortion during welding, respectively. Three different welding sequences for the tank were also modelled to compare the deformation that occurred due to each welding sequence. The results of the analysis predicted that changing the welding sequence around the mounting plate could not position the boss within the allowable dimensional range. The results also revealed the sequence in which the maximum distortion of the bosses welded onto the tank was 30% less than the maximum distortion due to the other sequences.

Keywords

References

  1. Han, S. H., "A study on the welding distortion for the upper plate of excavator", MS. thesis, Chonnnam National Univ., 1996.
  2. Lee, J. H., Kim, I. S., Jang, H. K., Kim, H. J., Kwak, S. K. and Ryoo, H. S., "A study on measurement system for welding distortion on light weight material of 30-ton excavator", Proceedings of Annual Spring Conference of KWJS, pp. 119, 2010.
  3. Zhen, C., Zhechao, C. and Ajit, S. R., "Influence of welding sequence on welding deformation and residual stress of a stiffened plate structure", Ocean Engineering, Vol. 106, pp. 271-280, 2015. https://doi.org/10.1016/j.oceaneng.2015.07.013
  4. Pandey, C., Giri, A. and Mahapatra, M. M., "On the prediction of effect of direction of welding on bead geometry and residual deformation of double-sided fillet welds", International journal of steel structures, Vol. 16, No. 2, pp. 333-345, 2016. https://doi.org/10.1007/s13296-016-6007-z
  5. Eslampanah, A. H., Aalami-aleagha, M. E., Feli, S. and Ghaderi, M. R., "3-D numerical evaluation of residual stress and deformation due welding process using simplified heat source models", Journal of Mechanical Science and Technology, Vol. 29, No. 1, pp. 341-348, 2015. https://doi.org/10.1007/s12206-014-1240-x
  6. Lee, D. Y., Park, K. D. and Kang, D. M., "A study on the finite element analysis in friction stir welding of Al alloy", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 5, pp. 81-87, 2015. https://doi.org/10.14775/ksmpe.2015.14.5.081
  7. Kim, D. E., Hea, D. E., Han, G. N., Hwang, Y. J., Lee, S. S. and Ahn, J. J., "A study on thermal deformation by welding heat imposed at assembly of excavator rotation part body", Proceedings of Annual Autumn Conference of KSME, pp. 37-41, 2006.
  8. Kala, S. R., Prasad N. S. and Phanikumar, G., "Studies on multipass welding with trailing heat sink considering phase transformation", Journal of Materials Processing Technology, Vol. 214, pp. 1228-1235, 2014. https://doi.org/10.1016/j.jmatprotec.2014.01.008
  9. Yang Y. S. and Kim, J.-W., "Analysis of weldment by using finite element method(1) - Heat flow in weldment", Journal of Welding and Joining, Vol. 29, No. 2, pp. 138-140, 2011.
  10. Yang Y. S. and Kim, J.-W., "Analysis of weldment by using finite element method(3) - Residual stress and distortion in weldment", Journal of Welding and Joining, Vol. 29, No. 4, pp. 363-364, 2011.
  11. ABAQUS, ABAQU Suser's manual, version. 5.5. Pawtucket, RI: Hibbitt, Karlsson and Sorensen Inc., 1995.
  12. Ghosh, A., Kumar, P. and Kumar, A., "Numerical analysis of heat transfer of arc welded plate', 5th Int. Manufacturing Technology, Design and Research Conference, pp.273-293, Dec., 2014.
  13. Bae, K. Y., Yang, Y. S., Hyun, C. M. and Cho, S. H., "Simplified mathematical formulas for the prediction of deformations in the plate bending process using an oxy-propane gas flame", Proc. IMechE Vol. 223 Part B: Jorunal of Engineering Manufacture, pp. 155-161, 2009.
  14. Jung, K. N., Lee, J. H., Lee, J. Y., and Yoo, C. D., "Heat Source modeling of GMAW considering metal transfer", Journal of KWJS, Vol. 22, No. 2, pp. 69-77, 2004.

Cited by

  1. Analysis of Angular Deformation in Multi-pass Butt Joint Welding of Thick Plates with X-shape Grooves using the Finite Element Method vol.17, pp.4, 2018, https://doi.org/10.14775/ksmpe.2018.17.4.169
  2. CNG용 Type 4 하이브리드 섬유 복합재 용기 개발에 대한 연구 vol.16, pp.4, 2016, https://doi.org/10.14775/ksmpe.2017.16.4.097