• 구강회복응용과학지
• /
• 제26권1호
• /
• pp.47-57
• /
• 2010

임플란트-골 계면상에 미세동요 없이 회복기를 가지는 것은 골융합을 위해서 필수적이다. 이를 위해 임플란트의 초기 안정성은 성공적인 예후를 위해서 중요한 요건이다. 충분한 골질과 골량은 임플란트의 초기 안정성과 조기 실패 방지를 위해 중요한 요소이지만, 임플란트가 갖는 외형적 특성이 초기 안정성에 미치는 영향에 대한 연구는 부족하다. 이에 본 연구는 임플란트의 형태가 초기 안정성에 미치는 영향을 알아보고자 하였다. 골질에 따라 피질골과 해면골의 두께가 서로 다른 모형골에 straight body의 US II, GS II, SS II system과 tapered body의 GS III system (OSSTEM Implant Co., Seoul, Korea) 임플란트를 식립하고 식립 회전력과 공진 주파수 및 동요도를 측정하였다. 이번 실험에서 초기 안정성에 주요한 영향을 미치는 요소는 골질로 나타났다. 임플란트의 형태에 따라 이중 나사선을 가지는 GS II 임플란트가 초기 안정성은 높게 나타났으며 tapered 한 임플란트가 straight 임플란트에 비해서 높은 초기 안정성을 얻을 수 있음을 알 수 있었다. 또한 tapered 임플란트 식립 시 임플란트의 외형과 조화된 식립구를 형성하는 것이 피질골이 두꺼운 경우 피질골에 과도한 압축력을 감소시키고 반대의 경우 해면골로부터 좀 더 많은 골고정을 얻을 수 있음을 알 수 있었다.

• 한국조리학회지
• /
• 제12권3호
• /
• pp.151-163
• /
• 2006

The sauce is very important to western dishes and also to value and relish of dishes because taste, appearance and the degree of water content are determined by sauce. Also, the taste derived from major sauce like a demi-glace and the basic sauce that affects cooking quality are highly recognized, but preference analyses of source and researches on each ingredients have not been performed up to now. Until today, sauces act as lubricants which add relish to dishes and aid digestion, so the importance of source is more emphasized to raise the taste, appearance, water content and specially healthy function of main ingredients. In this research, some problems of sauce itself and possibilities of improvement was grasped and then some remedies were suggested through the preference, variety and quantity analyses of demi-glace sauce practically used in hotels and restaurants around Gwang-Ju City and South Jeolla(Chon-Nam) Province. Finally, the volume of demi-glace sauce with various ingredients was suggested for various kinds of application. Through the actual proof analysis, preference of each sauce made from various kinds of ingredients was investigated. The result shows that the sauce made from beef bone is highly preferred, followed by pork bone and lamb bone. The least preferred is chicken bone.

• 대한치과교정학회지
• /
• 제20권2호
• /
• pp.247-266
• /
• 1990

The alveolar bone remodeling is essential in tooth movement by orthodontic forces. The collagen and chondroitin sulfate are acting as an important roles in bone remodeling. This study was performed to measure out the quantity of the collagen and chondroitin sulfate in the alveolar bone of rats applied by experimental orthodontic forces. The 150 Sprague-Dawley male rats were divided into the $PGE_2$ treated group, indomethacin treated group and the normal group. A 80gm force rubber band was used as a orthodontic appliance between upper incisors and right upper 1st molar, and left side of experimental rats with no appliance was regarded as a control side. The samples of alveolar bones were obtained from pressure and tension sites in all three groups. respectively, and in control sides, too. The results were as follows. 1. The change in total collagen remains stable in both pressure and tension sites of all three groups, compared with control side by the time consuming. 2. The change in soluble collagen showed the most highest level in tension site, lowest level in pressure site of $PGE_2$ treated group in 5th. experimental day. 3. The change in chondroitin sulfate showed the most highest level in pressure site, lowest level in tension site of $PGE_2$ treated group in 5th. experimental day. 4. In indomethacin treated group, the change of soluble collagen and chondroitin sulfate showed small range of variance compared with $PGE_2$ treated and normal group.

• 대한치과보철학회지
• /
• 제36권2호
• /
• pp.293-301
• /
• 1998

The purpose of this study was to investigate the effects of load on root that was applied to edentulous area in three simulated situation, in each case the guiding planes of abutment were right vertical, 95 degrees, or 100 degrees to residual ridge. The 2-dimensional finite element method was used and the finite element model was prepared as fellows. Right mandibular 1st and 2nd molar was lost and the 2nd premolar with distal rest was used as primary abutment which had three different degrees of guiding plane. Then 150N of compressive force was applied to central fossae of the 1st and 2nd molars and von Mises stress and displacement was measured. The results were as follows; 1. Irrespective of slopes of guiding planes, the stress was concentrated on mesial side of root apex and distal side of coronal portion of root, in particular on junction with distal alveolar bone. As slopes of guiding planes were increased. stress on root and compact bone surrounding abutment was increased but no considerable effect was seen on compact bone of residual ridge. 2. Distal side of coronal portion of root limited by periodontal ligament was displaced distally and mesial side of apical portion was mesially. With slope of guiding plane increasing, the pattern of displacement was similar with one another but the quantity was increased. 3. Both abutment & alveolar bone were displaced downward and root of abutment, especially distal side of coronal portion, was displaced severely. As the guiding plane was tiffed more mesially over $90^{\circ}$, the degree of displacement was also increased.

• 한국축산식품학회지
• /
• 제21권3호
• /
• pp.215-226
• /
• 2001

The CLA used to add in diet was chemically synthesized by alkaline isomerization method with corn oil. To investigated the effects of conjugated linoleic acid(CLA) added diet feeding on CLA accumulation and blood characteristics of pork, a total of 64 Landrace was fed both CLA-free and CLA-added(0.3, 0.6 and 0.9%) diet for 1∼4 weeks. Cholesterol compositions in blood and CLA contents and fatty acid compositions of loin, belly, bone and skin were determined at 1, 2, 3 and 4 weeks after CLA added at fed. The HDL content in blood of all treatments was higher(P<0.05) than that of control and that of treatment 3 was higher(P<0.05) than that of other treatments among the CLA feeding periods. Palmitic, stearic and linolenic acids composition of loin and belly was increased but oleic, linoleic and arachidonic acids composition of them was decreased according to increasing the CLA feeding periods. CLA contents of loin and belly were higher than that of control and increased according to increasing the quantity of CLA and CLA feeding periods. CLA contents of bone and skin were higher than that of control, too. CLA content of skin was higher than that of bone. It was suggested that CLA could be accumulated in loin, belly, bone and skin by dietary CLA supplementation, and the CLA concentration and fatty acid composition in muscle could be affected by CLA level in diet and feeding period.

• Journal of Periodontal and Implant Science
• /
• 제35권2호
• /
• pp.449-460
• /
• 2005

Objectives Aim of this study was to evaluate the clinical use and the efficacy of Frialit-2 implant system. Experimental Methods Fifty nine patients received placement of Frilalit-2 implants(137 implants) in their maxillary anterior and posterior sites(40 and 97 implants). Intraoral & clinical examination, chart review and radiographs were taken from each patient. Results 1. The total implant survival rate was 92.7% after a mean follow-up period of 19.9 months. 2. The implant survival rate placed in anterior region was 97.5%. 3. The implant survival rate placed in posterior region was 90.7%. 4. The implant survival rate placed in atrophic posterior maxilla with advanced technique (GBR, Sinus elevation) was 87.2%. 5. The implant survival rate placed in type N(D4) bone was 82%, while 95.7% in type III (D3), and 100% in type II(D2) bone. 6. Most of the failed implants(7 of 10) were removed during the maintenance stage after prosthodontic treatment. Conclusion It was concluded that Frialit-2 implant could be used satisfactorily in the esthetic anterior region, but the use in the posterior region, especially with poor bone quality and quantity, further studies are needed.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제45권5호
• /
• pp.276-284
• /
• 2019

Objectives: This study sought to compare efficiency results between the use of a customized implant (CI) and a reconstruction plate (RP) in mandibular defect reconstruction in an animal model. Materials and Methods: Fifteen rabbits underwent surgery to create a defect in the right side of the mandible and were randomly divided into two groups. For reconstruction of the mandibular defect, the RP group (n=5) received five-hole mini-plates without bone grafting and the CI group (n=10) received fabricated CIs based on the cone-beam computed tomography (CBCT) data taken preoperatively. The CI group was further divided into two subgroups depending on the time of CBCT performance preoperatively, as follows: a six-week CI (6WCI) group (n=5) and a one-week CI (1WCI) group (n=5). Daily food intake amount (DFIA) was measured to assess the recovery rate. Radiographic images were acquired to evaluate screw quantity. CBCT and histological examination were performed in the CI subgroup after sacrifice. Results: The 1WCI group showed the highest value in peak average recovery rate and the fastest average recovery rate. In terms of reaching a 50% recovery rate, the 1WCI group required the least number of days as compared with the other groups ($2.6{\pm}1.3days$), while the RP group required the least number of days to reach an 80% recovery rate ($7.8{\pm}2.2days$). The 1WCI group showed the highest percentage of intact screws (94.3%). New bone formation was observed in the CI group during histological examination. Conclusion: Rabbits with mandibular defects treated with CI showed higher and faster recovery rates and more favorable screw status as compared with those treated with a five-hole mini-plate without bone graft.

• PNF and Movement
• /
• 제10권1호
• /
• pp.61-70
• /
• 2012

Purpose : The purpose of this study was to investigate thigh muscle-bone CSA and leg strength during low-intensity exercise program with leg blood flow restriction by external compression to reduce muscle outflow. Methods : Eighteen health students gave informed written consent to participate in this investigation. An occlusion cuff was attached to the proximal end of the leg so that blood flow was reduced during the training. The training was conducted one times a day, three times a week, for 8 weeks using one sets of 30 minutes. The training program performed to squat with standing, lunge with standing and heel raise with one leg standing. Measurements of thigh muscle-bone CSA(cross-sectional area) and leg strength were evaluated pre and post-training. Statistical evaluation of these data was accomplished utilizing a paired t-test by SPSS 12.0 program for windows. Significance level was set at p <.05. Results : All data are reported as means and standard deviations(SD) for all variables. The result of the study is followed; After the training, muscle-bone CSA, gluteus maximus m, quadriceps m, hamstring m of both legs were significantly improved but not calf muscle(p<.05). There was no significant difference of change quantity between muscle-bone CSA and leg strength in Lt. and Rt. side. But the variation in leg muscle strength of Rt. leg(dominant) was much more increased than Lt. leg(non-dominant) after 8 weeks training. Conclusion : Low-intensity training with leg blood flow restriction offers a potentially useful method for improving leg muscle strength.

• Clinics in Shoulder and Elbow
• /
• 제27권1호
• /
• pp.88-107
• /
• 2024

The aim of this systematic review was to collect evidence on the following 10 technical aspects of glenoid baseplate fixation in reverse total shoulder arthroplasty (rTSA): screw insertion angles; screw orientation; screw quantity; screw length; screw type; baseplate tilt; baseplate position; baseplate version and rotation; baseplate design; and anatomical safe zones. Five literature libraries were searched for eligible clinical, cadaver, biomechanical, virtual planning, and finite element analysis studies. Studies including patients >16 years old in which at least one of the ten abovementioned technical aspects was assessed were suitable for analysis. We excluded studies of patients with: glenoid bone loss; bony increased offset-reversed shoulder arthroplasty; rTSA with bone grafts; and augmented baseplates. Quality assessment was performed for each included study. Sixty-two studies were included, of which 41 were experimental studies (13 cadaver, 10 virtual planning, 11 biomechanical, and 7 finite element studies) and 21 were clinical studies (12 retrospective cohorts and 9 case-control studies). Overall, the quality of included studies was moderate or high. The majority of studies agreed upon the use of a divergent screw fixation pattern, fixation with four screws (to reduce micromotions), and inferior positioning in neutral or anteversion. A general consensus was not reached on the other technical aspects. Most surgical aspects of baseplate fixation can be decided without affecting fixation strength. There is not a single strategy that provides the best outcome. Therefore, guidelines should cover multiple surgical options that can achieve adequate baseplate fixation.

• 대한치과보철학회지
• /
• 제41권5호
• /
• pp.674-688
• /
• 2003

Statement of Problem : With increasing demand of the implant-supported prosthesis, it is advantageous to use the different platform width of the fixture according to bone quantity and quality of the patients. Purpose : The purpose of this study was to assess the loading distributing characteristics of two implant designs according to each platform width of fixture, under vertical and inclined loading using finite element analysis. Material and method : The two kinds of finite element models were designed according to each platform width of future (4.1mm restorative component x 11.5mm length, 5.0mm wide-diameter restorative component x 11.5mm length). The crown for mandibular first molar was made using UCLA abutment. Each three-dimensional finite element model was created with the physical properties of the implant and surrounding bone. This study simulated loads of 200N at the central fossa in a vertical direction, 200N at the outside point of the central fossa with resin filling into screw hole in a vertical direction and 200N at the buccal cusp in a 300 transverse direction individually Von Mises stresses were recorded and compared in the supporting bone, fixture, and abutment screw. Results : The stresses were concentrated mainly at the cortex in both vertical and oblique load ing but the stresses in the cancellous bone were low in both vertical and oblique loading. Bending moments resulting from non-axial loading of dental implants caused stress concentrations on cortical bone. The magnitude of the stress was greater with the oblique loading. Increasing the platform width of the implant fixture decreased the stress in the supporting bone, future and abutment screw. Increased the platform width of fixture decreased the stress in the crown and platform. Conclusion : Conclusively, this investigation provides evidence that the platform width of the implant fixture directly affects periimplant stress. By increasing the platform width of the implant fixture, it showed tendency to decreased the supporting bone, future and screw. But, further clinical studies are necessary to determine the ideal protocol for the successful placement of wide platform implants.