• The Korean Journal of Mycology
• /
• v.31 no.3
• /
• pp.148-154
• /
• 2003

Extracts from 52 samples of mushrooms were prepared by using water, ethanol and methanol, and then yields and angiotensin I-converting enzyme(ACE) inhibitory activity were investigated. Sample mushrooms contained crude proteins of $7.1{\sim}56.5%$, curde lipids of $0.2{\sim}4.4%$ and carbohydrates of $30.3{\sim}86.6%$. Among 52 samples, the water extract from fruiting body of Pholiota spp. ASI 24027 showed the highest extraction yield of 68%. Water extract of Pholiota spp. ASI 24012 fruiting body had potential ACE inhibitory activity of 66%. The optimal extraction condition of the ACE inhibitor from the fruiting bodyies of Pholiota spp. ASI 24012 was In water at $30^{\circ}C$ for 1 hr and ACE inhibitory activity was 67.6% on the condition with 0.2 mg of $IC_{50}$.

• Journal of Bio-Environment Control
• /
• v.28 no.2
• /
• pp.117-125
• /
• 2019

This study compared the temperature and humidity measured by an aspirated radiation shield (ARS), the accuracy of which has been recently verified, and those measured by a system developed by the parent company (Company A) to investigate and improve the performance of the developed system. The results are as follows. Overall, the two-plate system had a lower radiation shielding effect than the one-plate system but showed better performance results when excluding the effect of strawberry vegetation on the systems. The overall maximum temperature ranges measured by company A's system and the ARS were $20.5{\sim}53.3^{\circ}C$ and $17.8{\sim}44.1^{\circ}C$, respectively. Thus, the maximum temperature measured by company A's system was $2.7{\sim}9.2^{\circ}C$ higher, and the maximum daily temperature difference was approximately $12.2^{\circ}C$. The overall average temperature measured by company A's system and the ARS was $12.4{\sim}38.6^{\circ}C$ and $11.8{\sim}32.7^{\circ}C$, respectively. Thus, the overall average temperature measured by company A's system was $0.6{\sim}5.9^{\circ}C$ higher, and the maximum daily temperature difference was approximately $6.7^{\circ}C$. The overall minimum temperature ranges measured by company A's system and the ARS were $4.2{\sim}28.6^{\circ}C$ and $2.9{\sim}26.4^{\circ}C$, respectively. Thus, the minimum temperature measured by company A's system was $1.3{\sim}2.2^{\circ}C$ higher, and the minimum daily temperature difference was approximately $2.9^{\circ}C$. In addition, the overall relative humidity ranges measured by company A's system and the ARS were 52.9~93.3% and 55.3~96.5%, respectively. Thus, company A's system showed a 2.4~3.2% lower relative humidity range than the ARS. However, there was a day when the relative humidity measured by company A's system was 18.0% lower than that measured by the ARS at maximum. In conclusion, there were differences in the relative humidity measured by the two company's devices, as in the temperature, although the differences were insignificant.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.48 no.7
• /
• pp.25-31
• /
• 2006

Permeable polymer concretes can be applied to roads, sidewalks, river embankment, drain pipes, conduits, retaining walls, yards, parking lots, plazas, interlocking blocks, etc. This study was to explore a possibility of using bottom ash as filler and recycled coarse aggregate of industrial by-products for permeable polymer concrete. The tests carried out at $20{\pm}1^{\circ}C$ and $60{\pm}2%$ relative humidity. At 7 days of curing, unit weight, void ratio, compressive and flexural strength and coefficient of permeability ranged between $1,652{\sim}1,828kgf/m^{3},\;15{\sim}29+%,\;18.2{\sim}24.5\;MPa,\;6.4{\sim}8.4\;MPa\;and\;6.8{\times}10^{-2}{\sim}1.7{\times}10^{-1}\;cm/s$, respectively. It was concluded that the bottom ash and recycled coarse .aggregate can be used in the permeable polymer concrete.

• Food Science and Preservation
• /
• v.16 no.3
• /
• pp.376-384
• /
• 2009

Response surface methodology (RSM) was used to monitor the characteristics of ethanol extracts from glasswort (Salicornia herbacea). A central composite design was used to investigate the effects of the independent variables of sample ratio, extraction temperature, and ethanol concentration on the dependent variables color, sugar, salinity, yield, electron donating ability, and total polyphenol content of extracts. The maximum $^{\circ}Brix$ (8.46) was obtained under specific extraction conditions, with a sample ratio of 7.04 g/100 mL, an extraction temperature of $89.01^{\circ}C$, and an ethanol concentration of 34.29% v/v. At a sample ratio, extraction temperature, and ethanol concentration of 7.00 g/100 mL, $89.15^{\circ}C$, and 34.14% v/v, respectively, the salinity was 7.35%. When the sample ratio, extraction temperature, and ethanol concentration were 5.56 g/100 mL, $68.61^{\circ}C$, and 99.14% v/v, respectively, the maximum electron donating ability was 86.10%. A maximized total polyphenol content of 1,140.15 mg/100 g was found with the following conditions: sample ratio of 8.6 g/100 mL, extraction temperature of $64.19^{\circ}C$, and ethanol concentration of 71.74% v/v. Overall, the optimal ranges of extraction conditions for effective components of glasswort were 3.38.5.33 g/100 mL sample ratio, $55.87-76.96^{\circ}C$, and 25.00.67.31% v/v ethanol.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.8
• /
• pp.1062-1069
• /
• 2007

Response surface methodology was employed to optimize extraction conditions for finding the maximizing the functional properties of roasted Pleurotus eryngii. Based on the central composite design, independent variables were ethanol concentration ($0{\sim}100%$), extraction time ($1{\sim}9$ min) and microwave power ($25{\sim}125$ W). Soluble solid content, electron donating ability and nitrite-scavenging ability were mainly affected by ethanol concentration, but ACE inhibition activity was largely affected by extraction time. The optimum ranges of extraction conditions resulting from superimposing the response surface were predicted to be ethanol concentration ($25{\sim}50%$), extraction time ($3{\sim}9$ min) and microwave power ($80{\sim}125$ W). Total protein and total phenolic compound content of optimal extracts were 45.80 mg/g and 7.42 mg/g, respectively. In phenolic compounds of roasted Pleurotus eryngii extracts, protocatechuic acid was the highest concentration at 1226.32 ${\mu}g/g$, followed by salicylic acid, catechin, p-hydroxybenzoic acid, caffeic acid, coumaric acid and hesperidin.

• Journal of Bio-Environment Control
• /
• v.16 no.3
• /
• pp.247-251
• /
• 2007

To extend the shelf-life of spinach after harvest, we investigated the effect of various packaging methods and storage temperature. In case of polypropylene film package, there was no weight loss, but in non-package, remarkably weight loss occurred as storage period extended and storage temperature risen. Content of vitamin C was decreased rapidly at early stage of storage, and decrease of vitamin C in low temperature storage was lower than that of room temperature storage, but its large difference according to packaging method was not observed. In hunter's value on spinach, b value in room temperature storage was higher than that of low temperature storage. In terms of freshness, shelf-life of spinach by low temperature storage $(1{\sim}3^{\circ}C)$ after PP film packaging lasted 34 days, and that by room temperature storage $(10{\sim}15^{\circ}C)$ after PP film packaging lasted 8 days, but that by room temperature storage after non-packaging lasted 3 days.

• Journal of Bio-Environment Control
• /
• v.18 no.2
• /
• pp.137-141
• /
• 2009

This experiment was investigated to effect of divided rhizome size and medium type on survival rate and growth of wasabi for 60 days in controlled growth room. In divided rhizome size of 5mm above, survival rate was 100% and their growth (plant height of 12cm and leaf number of 3${\sim}$4 per plant) was good at 30 days after wrapped-sphagnum treatment. Plant height was 20cm above and number of leaves increased in 1-2 per plant at 60 days after treatment. Survival rate and growth didn't show any effect on plant regulator of root-tone. In inorganic media (saprolite and aerated light stone) treatment, survival rate of wasabi in divided size of 5${\sim}$10mm showed 83% or above at 30 days in deep flow culture. Growth did not show significant difference of inorganic support media treatments. Therefore, it is possible for divided rhizome size of 5mm above to do production of seedlings by acclimatize for 30 days in hydroponics under controlled growth chamber.

• Journal of the Korean Electrochemical Society
• /
• v.11 no.3
• /
• pp.165-169
• /
• 2008

The effect of reduction of carbon dioxide by CODH(Carbon Monoxide Dehydrogenase) was compared on glassy carbon and gold working electrodes. In case of gold electrode, the choice of the optimum applied potential is very important since $H_2$ evolution can be mixed with $CO_2$ reduction. On the other hand, efficient $CO_2$ reduction was observed up to -650 mV vs. NHE on glassy carbon in neutral solution due to the larger overpotential for $H_2$ evolution on glassy carbon surface than that on gold surface. The optimum potential for $CO_2$ reduction was found to be $-570{\sim}600\;mV$ vs. NHE. The current efficiency of $CO_2$ to CO decreased dramatically at more negative potential according to the activity of enzyme decrease and the hydrogen evolution.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.7
• /
• pp.404-411
• /
• 2015

In this study, the effects of empty bed contact time (EBCT) and water temperature on the biodegradation of 9 halonitromethanes (HNMs) in biological activated carbon (BAC) process were investigated. Experiments were conducted at three water temperatures ($10^{\circ}C$, $15^{\circ}C$ and $25^{\circ}C$) and three EBCTs (5, 10 and 15 min). Increasing EBCT and water temperature increased the biodegradation efficiency of HNMs in BAC column. Dibromochloronitromethane (DBCNM) and tribromonitromethane (TBNM) showed the highest biodegradation efficiency, but chloronitromethane (CNM) and dichloronitromethane (DCNM) were the lowest. The kinetic analysis suggested a pseudo-first-order reaction model for biodegradation of 7 HNMs at various water temperatures and EBCTs. The pseudo-first-order biodegradation rate constants ($k_{bio}$) of 7 HNMs ranged from $0.0797{\sim}0.7657min^{-1}$ at $10^{\circ}C$ to $0.1245{\sim}1.8421min^{-1}$ at $25^{\circ}C$. By increasing the water temperature from $10^{\circ}C$ to $25^{\circ}C$, the biodegradation rate constants ($k_{bio}$) were increased 1.6~2.4 times.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.12
• /
• pp.858-864
• /
• 2014

In this study, The effects of empty bed contact time (EBCT) and water temperature on the biodegradation of 8 synthetic fragrances (SFs) in biological activated carbon (BAC) process were investigated. Experiments were conducted at two water temperatures (7 and $18^{\circ}C$) and three EBCTs (5, 10 and 15 min). Increasing EBCT and water temperature increased the biodegradation efficiency of SFs in BAC column. Pentalide and ambrettolide were the highest biodegradation efficiency, but DPMI and ADBI were the lowest. The kinetic analysis suggested a pseudo-first-order reaction model for biodegradation of 8 SFs at various water temperatures and EBCTs. The pseudo-first-order biodegradation rate constants ($k_{bio}$) of 8 SFs ranging from $0.1184{\sim}0.6545min^{-1}$ at $7^{\circ}C$ to $0.3087{\sim}0.9173min^{-1}$ at $18^{\circ}C$. By increasing the water temperature from $7^{\circ}C$ to $18^{\circ}C$, the biodegradation rate constants ($k_{bio}$) were increased 1.4~2.6 times.