• Journal of the Korean Wood Science and Technology
• /
• v.39 no.1
• /
• pp.75-85
• /
• 2011

The main purpose of this study is to evaluate the potential of producing bioethanol from yellow poplar ($Liriodendron$ $tulipifera$) wood chips by oxalic acid pretreatment and to examine the pretreatment conditions by response surface methodology (RSM). Based on $2^3$ factorial design, adjusted variables were reaction temperature ($^{\circ}C$), residence time (min), and acid loading (g/g), and a series of distinct 15 experimental conditions was organized with duplication at central point (total 16 performances). After pretreatment, simultaneous saccharification and fermentation (SSF) was subjected on solid fraction with yeast strain $Pichia$ $stipitis$. Maximum ethanol yields of the most samples were measured at 72 hours and applied to RSM as a dependent variable. 9.7 g/${\ell}$ of ethanol was produced from the solid pretreated at $180^{\circ}C$ for 40 min with 0.013 g/g of oxalic acid loading. According to the response surface methodology, it was determined that the temperature is the most governing factor via statistic analysis.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.2
• /
• pp.58-65
• /
• 2016

This study was a preparatory experiment aimed the development of membrane scaffolds for tissue engineering. A PCL composite solution contained sodium chloride(NaCl). PCL porous membrane scaffolds were formed on a glass casting plate using a film applicator and immersed in distilled water to remove the NaCl reaching after drying. NaCl was used as a pore former for a 3 dimensional pore net-work. The dry condition parameters were $4^{\circ}C$, room temperature (RT) and $40^{\circ}C$ for each different temperatures in the drying experiment. SEM revealed the morphology of the pores in the membrane after drying and evaluated the in vitro cytotoxicity for basic bio-compatibility. The macro and micro pores existed together in the scaffold and showed a 3-dimensional pore net-working morphology at RT. The in vitro cytotoxicity test result was "grade 2" in accordance with the criterion for cytotoxicity by ISO 10993-5. The dry condition affected the formation of a 3 dimensional pore network and micro and macro pores. Therefore, these results are expected provide the basic process for the development of porous membrane scaffolds to control degradation and allow drug delivery.

• Korean Journal of Food Science and Technology
• /
• v.40 no.3
• /
• pp.283-289
• /
• 2008

This study used response surface methodology (RSM) in an effort to optimize the hot water extraction conditions of dandelion leaves in order to increase antioxidant activity in the extract. A central composite design was applied to investigate the effects of independent variables, which included the ratio of solvent to sample ($X_1$), extraction temperature ($X_2$), and extraction time ($X_3$), on dependent variables of the extracts, including soluble solid ($Y_1$), total polyphenols ($Y_2$), total flavonoid ($Y_3$), 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging ability ($Y_4$), 2,2'-azino-bis (3-ethylbenzthiazoline-6-sulfonic acid) (ABTS) radical scavenging ability ($Y_5$), and superoxide radical scavenging ability ($Y_6$). The estimated optimal conditions were as follows: $83.77{\pm}1.07^{\circ}C$ of the extraction temperature, $20.85{\pm}0.24 mL/g$ of solvent per sample, and $1.59{\pm}0.12$ hr of extraction time. At the optimal conditions, the predicted characteristic values were: a yield of 38.98%, a total polyphenol level of $74.28{\mu}g/mg$, a total flavonoid level of $74.00{\mu}g/mg$, a DPPH radical scavenging ability ($IC_{50}$) of 0.14 mg/mL, a ABTS radical scavenging ability ($IC_{50}$) of 3.24 mg/mL, and a superoxide radical scavenging ability ($IC_{50}$) of 2.49 mg/mL.

• KSBB Journal
• /
• v.24 no.3
• /
• pp.321-326
• /
• 2009

This study was to optimize the medium components for astaxanthin production in Paracoccus sp. through surface response methodology. A screening test was first conducted on 5 medium components using a Plackett-Burman design, from which $MgSO_4$ and yeast extract were identified as the significant factors affecting astaxanthin production. These significant factors were optimized by central composite design of experiments and response surface methodology, as 2.83 g/L $MgSO_4$ and 7.02 g/L yeast extract, respectively. The expected astaxanthin concentration with these optimized medium compositions were 0.925 mg/L. In flask culture, the experimentally obtained concentration of astaxantin was 1.021 mg/L, where it had been 0.4 mg/L before optimization.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.1
• /
• pp.66-71
• /
• 2008

This study was conducted to predict optimum leaching conditions for functional components of black tea. Two variables were used to determine the optimum leaching temperature and leaching time with a five-level central composite design and response surface methodology. Soluble solid, reducing sugar, total phenolics, and total flavonoid contents increased as leaching temperature and time increased. The ranges of maximum leaching conditions for these components were $78.28{\sim}87.08^{\circ}C$ and $3.97{\sim}4.27min$. Vitamin C level was maximal at $61.29^{\circ}C$ and 2.68 min. Electron donating ability showed the highest values at $68.30^{\circ}C$ and 0.54 min. Based upon the superimposed results, it was predicted that the optimal ranges of leaching conditions for some functional components from black tea were $63{\sim}79^{\circ}C$ for $1.5{\sim}2.1$ min.

• Polymer(Korea)
• /
• v.36 no.2
• /
• pp.124-130
• /
• 2012

The uniform nanofibers of poly(L-lactide-$co$-${\varepsilon}$-caprolactone) (PLCL) with different contents of marine collagen (MC) were successfully prepared by electrospinning method. The effects of the major parameters in electrospinning process such as tip to target distance (TTD), voltage, nozzle size and flow rate on the average diameter of the electrospun nanofiber were investigated in generating composite nanofiber. The diameter and morphology of the nanofibers were confirmed by a scanning electron microscopy (SEM). Also, we measured a water contact angle to determine the surface wettability of the nanofibers. The average diameter of the nanofibers decreased as the value of TTD, MC contents, and voltages increased in comparison with that of pristine PLCL nanofiber. In contrast, the diameter of the nanofibers increased as the flow rate and inner diameter of nozzle increased in comparison with that of pristine PLCL. In addition, the hydrophilicity of the nanofiber and attachment of MG-63 cells on the sheets increased as incorporated collagen contents increased. Therefore, the marine collagen would be a potential material to enhance cellular interactivity of synthetic materials by mimicking the natural tissue.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.17 no.1
• /
• pp.42-45
• /
• 2014

Even though to discard the waste FRP (Fiber-Reinforced Plastic) is urgent and problematic, the way to do it has not been efficient. In our project team the FRP have been splitted into some layers which have different physical properties; mat and roving layers. Among those, the roving layer woven like a basket by bundles of glass fibers has been cut into reusable fibers called 'F-fiber'. F-fiber is 1 mm or 3 mm in width and 3 cm in length. It is used in fiber-reinforced concrete (FRC) with 0.5%, 0.7%, 1.0%, or 1.5% of volume ratio. Produced FRC was tested in compressive, tensile, and bending stress in contrast to the without-fiber (standard) concrete and 0.1% polypropylene reinforced concrete (PP-FRC). The tensile and bending stresses are more or less those of PP-FRC. The compressive stress, however, is similar (with 3 mm F-fiber) to or lower (with 1 mm F-fiber) than that of standard concrete. Conclusively the usage of the waste FRC in concrete is advised to be limited to the one where the compressive stress is not much critical.

• Applied Biological Chemistry
• /
• v.51 no.1
• /
• pp.24-37
• /
• 2008

Yeast with excellent ferment ability was isolated and selected from wild grape to manufacture wild grape wine. Wild grape wine by SMR-3 isolated from wild grape was better than other strains in quality, such as high alcohol content and low acidity, residual sugar, organic acid and fusel oil content. Fermentation condition was optimized to manufacture wild grape wine with response surface methodology using isolated SMR-3 as an alcohol fermentation strain. As a result of culture conditions, 10.61% of alcohol content was expected under the conditions of $21.91^{\circ}C$ fermenting temperature, $21.48^{\circ}brix$ of initial sugar content, and 14.65 day of fermentation time. Residual sugar content showed the lowest value at $24.48^{\circ}C$ fermentation temperature, $12.78^{\circ}brix$ of initial sugar content, and 9.02 day fermentation time. The highest level of sensory evaluation was found at $20.23^{\circ}C$ fermentation temperature, $25.30^{\circ}brix$ of initial sugar content, and 5.94 day fermentation time. Ethyl alcohol was the main alcohol component in wild grape wine and fusel oil in wild grape wine was hardly detected; thus, the quality of wild grape wine was considered excellent. The optimal fermentation conditions of wild grape wine was superimposed by deriving a regression equation for alcohol content, fusel oil, ethyl alcohol content, and overall palatability for each variable of wild grape wine. Hence, the optimal fermentation conditions are estimated to be: fermentation temperature $24{\sim}28^{\circ}C$, initial sugar content $20{\sim}24^{\circ}brix$, and fermenting time $12{\sim}14$ days.

• Journal of Life Science
• /
• v.18 no.4
• /
• pp.550-555
• /
• 2008

This study focused on alcohol fermentation properties of red ginseng extracts using Saccharomyces cerevisiae JF-Y3. Central composite design was employed to investigate the influence of red ginseng extract content ($10{\sim}50%$, v/v) and yeast extract ($0.5{\sim}2.5%$, w/v) on the properties of alcohol fermentation added with red ginseng extracts. Yeast cell growth was affected both by red ginseng extract content and yeast extract content, and red ginseng extract content had a greater effect on yeast cell number than yeast extract content. Yeast cell number increased along with decrease of the red ginseng extract content and with increase of yeast extract content. Alcohol content was maximal at 30% red ginseng extracts and 0.50% yeast extract and the predicted maximum value of alcohol content was 12.45%. Brix degree and total sugar content were significant within 1% level (p<0.01), and brix degree was affected both by red ginseng extract and yeast extract content. Total sugar content was significantly affected by red ginseng content.

• Journal of Life Science
• /
• v.18 no.4
• /
• pp.556-564
• /
• 2008

Response surface methodology was used to monitor the optimization of fermentation conditions for red ginseng wine. A central composite design was applied to investigate the effects of independent variables, fermentation temperature ($X_1$), fermentation time ($X_2$) and initial pH ($X_3$) on dependent variables, physicochemical characteristics and effective ingredients. Alcohol and total sugar content were significantly affected both by fermentation temperature and time. Crude saponin content was greatly affected by fermentation time, and pH was significantly affected by initial pH. Fermentation time and initial pH had a greater effect on ginsenoside content than fermentation temperature. Ginsenoside content increased along with fermentation time and initial pH. We elicited a regression formula for each variable, and superimposed the total optimum points of fermentation conditions for physicochemical characteristics and the effective constituents. The predicted values at the optimum fermentation conditions were at $21{\sim}27^{\circ}C$ for $15{\sim}20$ day in initial pH $4.6{\sim}5.2$.