• 한국정보통신학회논문지
• /
• 제4권1호
• /
• pp.115-121
• /
• 2000

입력제어신호 변형은 유연한 빔의 진동을 감소시키는 중요한 수단이다. 본 논문에서는 유한시간에서 다중 모드인 유연한 빔의 오차 진동을 제거하는 매우 단순한 입력제어신호 변형 방법을 소개한다. 제어신호는 선형 방정식의 풀이에 의해 구성되어 진다. 유한시간 동안 원하는 동작의 모터 각도는 임의의 한정된 오차 진동을 제거함으로서 도달된다. 폐루프 구성에서 모터 각도에 대한 기준입력으로서의 제어신호 사용에 대한 필요한 조건들 또한 다루게 된다. 제안된 시스템 구성의 효과는 컴퓨터 시뮬레이션을 통해 증명된다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.67.3-67
• /
• 2001

A fuzzy control strategy is described which is utilized to control the joint angle and tip deflection in single flexible manipulator. In this paper, an existing model for a single flexible manipulator is used f3r the initial development of an FLC. One FLC is designed to govern the joint angle of the manipulator as it is rotated from one position to another, and a second FLC is designed to attenuate the tip deflection which result from joint angle body motion. Reference Trajectory Command is an important method to reduce vibration in flexible beam. This paper presents a very simple command control shaping which eliminates multiple mode residual vibration in a flexible beam combined fuzzy controller ...

• 융합신호처리학회논문지
• /
• 제3권1호
• /
• pp.61-66
• /
• 2002

A fuzzy control strategy is described which is utilized to control the joint angle and tip deflection in single flexible manipulator. In this paper, an existing model for a single flexible manipulator is used for the initial development of an FLC. One FLC is designed to govern the joint angle of the manipulator as it is rotated from one position to another, and the second FLC is designed to attenuate the tip deflection which result from joint angle body motion. Reference Trajectory Command is an important method to reduce vibration in flexible beam. This paper presents a very simple command control shaping which eliminates multiple mode residual vibration in a flexible beam combined parallel fuzzy controller. The effectiveness of proposed scheme is demonstrated through computer simulation.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.643-648
• /
• 2003

The problem considered in this paper is that the tip position of a flexible cantilever beam is controlled to follow a command signal, using a pair of piezoelectric actuators at the clamped end. The beam is lightly damped and so the natural transient response is rather long, and also since the sensor and actuator are not collocated, the plant response is non-minimum phase. Two control strategies were investigated. The first involved conventional PID control in which the feedback gains were adjusted to give the fastest closed-loop response to a step input. The second control strategy was based on an internal model control (IMC) architecture. The control filter in the IMC controller was a digital FIR device designed to minimize the expectation of the mean square tracking error. The IMC controller designed fur the beam was found to have very much reduced settling times to a step input compared with those of the PID controller.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.608-610
• /
• 2000

The static characteristic of a piezoelectric beam is for finding resonance frequency of the beam. In practice, it is required to analyze the beam with external command circuit including capacitors, inductors, and resistors for control. It means that the proper analysis of a piezoelectric beam with external command circuit is required by a dynamic analysis. We can also got transient and steady-state solution from the analysis. In this paper, the static and dynamic characteristic of the piezoelectric beam using FEM(Finite Element Method) are proposed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.589-594
• /
• 2007

In this paper, the optimal command input is considered in order to minimize the residual vibrations of a flexible cantilever beam when the beam simply changes its position by translation or rotation. Although a cantilever beam has many modes of vibration, it is shown that the consideration of the first mode is sufficient in this case. Thus, the problem becomes a singledegree-of-freedom system subjected to a ground excitation. Two simple methods are proposed to find the optimal command input based on the Shock Response Spectrum (SRS). The first method is the simplest and can be applied to lightly damped cases, and the second method is applicable to more general problems. The second method gives almost the same results as the input shaping method. However the proposed method gives a easier and clearer control strategy.

• 한국소음진동공학회논문집
• /
• 제18권1호
• /
• pp.3-10
• /
• 2008

In this paper, the optimal command input is considered in order to minimize the residual vibrations of a flexible cantilever beam when the beam simply changes its position by translation or rotation. Although a cantilever beam has many modes of vibration, it is shown that the consideration of the first mode is sufficient in this case. Thus, the problem becomes a single-degree-of-freedom system subjected to a ground excitation. Two simple methods are proposed to find the optimal command input based on the shock response spectrum (SRS). The first method is the simplest and can be applied to lightly damped cases, and the second method is applicable to more general problems. The second method gives almost the same results as the input shaping method. However the proposed method gives a easier and clearer control strategy.

• 한국구조물진단유지관리공학회 논문집
• /
• 제16권3호
• /
• pp.60-66
• /
• 2012

본 논문에서는 무선 센서 네트워크를 이용한 피드백 진동제어 시스템을 구성하고, 모형 구조물을 대상으로 구성된 시스템의 진동제어효과를 실험적으로 검증하고자 하였다. 이를 위하여 본 논문에서는 블루투스 기반의 무선 I/O 센서 시스템과 스마트 재료를 사용한 전단형 MR 댐퍼를 개발하고, 또한 일정한 크기의 정현파형을 발생시키는 가진기 및 모형 단순보 구조물을 이용하여 피드백 진동제어 시스템의 실험�V을 구성하였다. 진동제어 실험은 가진기를 이용해 보의 1/4 등분점에서 일정하게 가진한 상태에서, 보 중앙점에 수직방향으로 설치된 MR 댐퍼를 이용해 진동을 제어하였으며, 보의 2/4 등분점에서의 가속도 응답을 획득하여 제어효과를 평가하였다. 이때, 제어명령은 보 중앙점에 무선 I/O 센서 노드를 설치하고, 여기서 획득된 가속도 응답이 일정 크기 이상일 경우에 설정된 범위의 전압신호를 MR 댐퍼로 출력하도록 설정하였다. 최종적으로 본 논문에서 구성된 무선 센서 네트워크 기반의 실시간 피드백 진동제어 시스템은 비록 제한적인 명령 체계에서 검증되었지만, 실시간적으로 목적된 제어명령의 발생시킴으로써 구조물의 진동을 효과적으로 감소시키는 것을 확인하였고, 추후 다양한 준능동 제어 알고리즘을 적용한 구조적 응답제어시스템으로의 활용 가능성을 제시하였다.

• 한국군사과학기술학회지
• /
• 제11권4호
• /
• pp.92-98
• /
• 2008

A beam steering system of X-band 2-D phased array antenna for radar application is developed. The beam steering system consists of real-time command generator, beam steering unit, control PCB of array module and power supply. It plays a role of beam steering and on-line check of phased array antenna. The performance of beam steering system is verified with pulse timing of current control in phase shifters and measurement of far-field of phased array antenna. The developed beam steering system offers basic technology to develop full-scale beam steering system of multi-function radar.

• International Journal of Control, Automation, and Systems
• /
• 제4권4호
• /
• pp.524-528
• /
• 2006

A controller built with the gyro effect for a balance-beam can freely control the attitude of an unstructured object by changing the position of an inner gimbal. In this paper, we propose a new balance-beam controller that can detect the inertia of the load to limit the velocity of the load commanded by a user. We found that when there was smaller load inertia, a larger restoration displacement occurred. Therefore, the load can be identified by issuing a predefined command to measure the restoration displacement, which enables us to construct a controller that can limit the angular velocity of the load by planning the motion. Experimental results show the performance of the controller with different loads.