• 한국인터넷방송통신학회논문지
• /
• 제20권2호
• /
• pp.123-131
• /
• 2020

함정용 다기능레이다의 체계성능은 레이다 빔 운용에 따라 크게 영향 받는다. 다기능레이다는 단일 기능을 지닌 탐색레이더와 추적레이다보다 복잡한 빔 운용을 수행해야 한다. 본 논문에서는 함정용 다기능레이다의 체계 성능을 검증하기 위한 분석도구 제작 내용을 기술한다. 체계 성능 검증을 위해 레이다를 탑재한 함정과 표적을 탐지하는 레이다로 구성하였고, 탐지 대상으로는 대공 및 대함 표적으로 구성하였다. 각각 구성된 모델을 통합하여 추적빔과 탐색빔의 자원관리가 적용된 함정용 다기능 레이다 시뮬레이터를 구현하였다. 분석도구에 체계설계 성능 파라미터를 적용한 후, 운용 시나리오에서 시뮬레이션을 하여 제작한 분석도구를 검증하였다.

• Coupled systems mechanics
• /
• 제7권5호
• /
• pp.635-647
• /
• 2018

Dynamic problems arising from the Euler-Bernoulli beam model with inhomogeneous elastic properties are considered. The method of Green's function and perturbation theory are employed to find the deflection in the beam correct to the first-order. Eigenvalue problems appearing from transverse vibrations of inhomogeneous beams in linear and nonlinear cases are also discussed.

• 대한전자공학회논문지
• /
• 제26권10호
• /
• pp.1571-1575
• /
• 1989

Nonlinear beam coupling phenomena in photorefractive materials are analyzed as a function of the input beam intensities. Signal beam saturation and pump beam depletion are shown to be the intensity-dependent functions of these materials. Utilizing these phenomena in a photorefractive BaTiO3 crystal, optical logic processors such as AND, OR, NOT, etc., are implemented.

• 한국광학회지
• /
• 제15권3호
• /
• pp.200-213
• /
• 2004

등방성 빔 단면과 비등방성 공간 부분 코히어런스 특성을 갖는 가우시안 셀 모델 빔의 구현에 대하여 연구하였다. He-Ne 레이저의 가우시안 빔이 회전하는 홀로그래픽 확산판을 통과하면서 생성된 확산광을 등방성 빔 단면과 비등방성 공간 코히어런스 특성을 갖는 가우시안 셀 모델 빔으로 만드는 광학계를 제안하였다. 광학계의 해석적 설계 방정식을 유도하였고 이를 사용한 설계 예를 제시하였다.

• Structural Engineering and Mechanics
• /
• 제69권6호
• /
• pp.615-626
• /
• 2019

The 3-noded metric Timoshenko beam element with an offset of the internal node from the element centre is used here to demonstrate the best-fit paradigm using function space formulation under locking and mesh distortion. The best-fit paradigm follows from the projection theorem describing finite element analysis which shows that the stresses computed by the displacement finite element procedure are the best approximation of the true stresses at an element level as well as global level. In this paper, closed form best-fit solutions are arrived for the 3-noded Timoshenko beam element through function space formulation by combining field consistency requirements and distortion effects for the element modelled in metric Cartesian coordinates. It is demonstrated through projection theorems how lock-free best-fit solutions are arrived even under mesh distortion by using a consistent definition for the shear strain field. It is shown how the field consistency enforced finite element solution differ from the best-fit solution by an extraneous response resulting from an additional spurious force vector. However, it can be observed that when the extraneous forces vanish fortuitously, the field consistent solution coincides with the best-fit strain solution.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.285-290
• /
• 2003

A method for the dynamic analysis of curved beam conveying fluid presents. The dynamics of curved beam is based on inextensible theory and the fluid in curved beam has uniform velocity. The equations of motion of curved beam are decoupled by in-plane motion and out-of$.$Plane motion. The solutions of equations are presented by a finite element method and validate by comparing the natural frequency with analytical solution, straight beam theories and Nastran. The influence of fluid velocity on the frequency response function is illustrated and discussed.

• Structural Engineering and Mechanics
• /
• 제67권5호
• /
• pp.439-455
• /
• 2018

Within a probabilistic framework, this paper addresses the determination of the static structural response of beams and frames with partially restrained (semi-rigid) connections. The flexibility of the nodal connections is incorporated via an idealized linear-elastic behavior of the beam constraints through the use of rotational springs, which are here considered uncertain for taking into account the largely scattered results observed in experimental findings. The analysis is conducted via the Probabilistic Transformation Method, by modelling the spring stiffness terms (or equivalently, the fixity factors of the beam) as uniformly distributed random variables. The limit values of the Eurocode 3 fixity factors for steel semi-rigid connections are assumed. The exact probability density function of a few indicators of the structural response is derived and discussed in order to identify to what extent the uncertainty of the beam constraints affects the resulting beam response. Some design considerations arise which point out the paramount importance of probability-based approaches whenever a comprehensive experimental background regarding the stiffness of the beam connection is lacking, for example in steel frames with semi-rigid connections or in precast reinforced concrete framed structures. Indeed, it is demonstrated that resorting to deterministic approaches may lead to misleading (and in some cases non-conservative) outcomes from a design viewpoint.

• 한국해양공학회지
• /
• 제17권4호
• /
• pp.59-65
• /
• 2003

In order to achieve the desired lightweight and robust design of a structure, it is preferable to design a structure and its control system, simultaneously, which is termed the combined optimal design. A constant-cross-sectional area cantilever beam was chosen as the optimum design method, An initial load and a time-varying disturbance were applied at the free end of the beam. Sliding mode control was selected, due to its insensitivity to the disturbance, compared with other modes. It is known that the sliding mode control is robust to the disturbance and is uncertain, only if a matching condition is met, after giving a switching hyper plane. In this study, the optimum method was used for the design of the switching hyper plane, and the objective function of the optimum switching hyper plane was assumed to be the objective of the control system. The total weight of the structure was treated as a constraint, and the cross sectional areas of the beam were considered as design variables, the result being a nonlinear programming problem. To solve it, the sequential linear programming method was applied. As a result of the optimum design, the effect of attenuating vibrations has been substantially improved. Moreover, the lightweight design of the structure became possible as a result of the relationship of the weight of the structure to the control objective function.

• 한국입자에어로졸학회지
• /
• 제8권1호
• /
• pp.29-35
• /
• 2012

The Faraday cup electrode of different size has been developed and evaluated to investigate the diffusion effect of particles by Brownian motion in a particle beam mass spectrometer(PBMS). Particles which focused and accelerated by aerodynamic lens are charged to saturation in an electron beam, and then deflected electrostatically into a Faraday cup detector for measurement of the particle current. The concentration of particles is converted from currents detected by Faraday cup. Measurements of particle current as a function of deflection voltage are combined with measured relationships between particle velocity and diameter, charge and diameter, and mass and diameter, to determine the particle size distribution. The particle currents were measured using 5, 10, 20, 40 mm sized Faraday cup that can be move to one direction by motion shaft. The current difference for each sizes as a function of position was compared to figure out diffusion effect during transport. Polystyrene latex(PSL) 100, 200 nm sized standard particles were used for evaluation. The measurement using 5 mm sized Faraday cup has the highest resolution in a diffusion distance and the smaller particles had widely diffused.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 E
• /
• pp.1767-1769
• /
• 1998

We have established a pulsed electron beam generation system with an energy of 200[keV], pulse repetition rate of 200[Hz], and several tens of [${\mu}s$] pulse width. The system is characterized by a cold cathode that is simpler than the hot cathode. Target object does not need to be scanned because of large aperture electron beam of 300[$cm^2$]. Electron source is secondary electrons that are generated when the ions from the glow discharge collide on the cathode surface. In this paper, the discharge current characteristics are investigated experimentally as a function of He gas pressure in order to obtain stable glow discharge. And computer simulations are carried out as a preliminary study for the development of low energy large aperture electron beam generator. The variation of electon beam current is investigated as a function of rising time of high voltage when 20[kV] potential is applied in 20[mTorr] pressure.