• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.417-419
• /
• 2016

Internet of things(IoT) services should be available to provide unattended operation in a remote area, long battery life, low-cost infrastructure, two-way communication platform. Urban transit in Busan is made up of the wire-based infrastructure except for voice infrastructure of transmit/receive and new data infrastructure is required for Internet of things(IoT) services. Urban transit environments in Busan were analyzed in order to apply LoRa Wireless Network(the standard communication way of IoT) and proposes a building after a Disaster Evacuation System.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.1
• /
• pp.82-86
• /
• 2006

Propylene Carbonate (PC) has the interesting properties of being able to dissolve and dissociate lithium salts, thus leading to highly conducting electrolytes even at low temperatures. Moreover, electrolytes that contain PC are stable against oxidation at voltages up to ~5 V. However, it is known that, when lithium is intercalated into graphite in pure PC based electrolytes, solvent co-intercalation occurs, leading to the destruction of the graphite structure. (i.e., exfoliation). The objective of this study was to suppress PC decomposition and prevent exfoliation of the graphite anode by co-intercalation. Electrochemical characteristics were studied using Kawasaki mesophase fine carbon (KMFC) in different 1 M $LiPF_6$/PC-based electrolytes. Electrochemical experiments were completed using chronopotentiometry, cyclic voltammetry, impedance spectroscopy, X-ray diffraction, and scanning electron microscopy. From the observed results, we conclude that the MA and $Li_2CO_3$ additive suppressed co-intercalation of the PC electrolyte into the graphite anode. The use of additives, for reducing the extent of solvent decomposition before exfoliation of the graphite anode, could therefore enhance the stability of a KMFC electrode.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.31 no.4
• /
• pp.153-161
• /
• 2008

신뢰성 평가 시험은 종종 성능 평가에 장기간의 시간이 요구되며, 전체 생산비용까지 증가시키는 문제점을 안고 있다 스트레스를 이용한 가속수명시험은 제품의 신뢰성 고장과 밀접한 관련이 있는 고장 메커니즘의 촉진을 통해 고장에 이르는 기간을 단축함으로써 신뢰성 평가의 효율성을 도모할 수 있다. 본 연구에서는 이러한 스트레스 가속 시험에 빈도가속(Usage-Rate Acceleration) 또는 판정가속(Tightening Critical-Values) 등을 결합하여 한층 높은 가속효과를 도모하는 방법을 제안하고, 국내에서 생산되고 있는 2차 전지 제품에 대한 실제 시험 사례분석을 통해 결합된 가속방법의 효과를 실증적으로 보여주고 있다.

• Journal of Korea Technology Innovation Society
• /
• v.7 no.1
• /
• pp.64-88
• /
• 2004

This paper aims at investigating which factors play important roles in selecting government's new core IT industries and how competitive they are. We surveyed 6 competitiveness factors and 17 IT industries for the expert group. The logit and probit models were estimated and SWOT analysis was performed. The empirical results show that government put emphasis on marketability, externality and technology, not publicity, when selecting IT new core industry. The skilled human resources turn out to be a threat factor in the government selected IT new core industries such as home-network, third generation semi-conductor. Therefore, training or education system for skilled labors is required to develop and nurture such industries. The contribution to small medium venture industry and publicity are lower in the several industries such as intelligent service robots, post PC, embodied S/W, next generation battery, which are selected by government, not by standardized data based criterion. in such industries, marketabilities, technology, skilled human resources are threats factors to such industries. Therefore every effort for enhancing the marketability and R&D investment and education system for skilled labor are necessary to develop the industries.

• Journal of Information Processing Systems
• /
• v.6 no.1
• /
• pp.53-66
• /
• 2010

The energy efficiency is a key design issue to improve the lifetime of the underwater sensor networks (UWSN) consisting of sensor nodes equipped with a small battery of limited energy resource. In this paper, we apply a hexagon tessellation with an ideal cell size to deploy the underwater sensor nodes for two-dimensional UWSN. Upon this setting, we propose an enhanced hybrid transmission method that forwards data packets in a mixed transmission way based on location dependent direct transmitting or uniform multi-hop forwarding. In order to select direct transmitting or uniform multi-hop forwarding, the proposed method applies the threshold annulus that is defined as the distance between the cluster head node and the base station (BS). Our simulation results show that the proposed method enhances the energy efficiency compared with the existing multi-hop forwarding methods and hybrid transmission methods

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.32 no.4
• /
• pp.341-348
• /
• 2019

This paper reports the microstructure and electrochemical properties of Si-Al-Fe ternary amorphous alloys prepared by rapid solidification as an anode for lithium secondary batteries. The microstructure was analyzed using XRD and HR-TEM with EDS mapping. In accordance with DSC analysis, annealing was performed to crystallize the active nano-Si in the amorphous alloy. Thus, nano-Si forms (~80 nm) embedded in the matrix alloy, such as $Fe_2Al_3Si_3$, $FeSi_2$, and $Fe_{0.42}Si_{2.67}$, were successfully synthesized. The electrode based on the Si-Al-Fe ternary alloy delivered an initial discharge capacity of approximately $700mAh^{g-1}$, and exhibited a high Coulombic efficiency of 99.0~99.6% from the $2^{nd}$ to $70^{th}$ cycles.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.32 no.3
• /
• pp.179-186
• /
• 2019

This work investigated the effects of different conductive agents on the electrochemical properties of anodes. SiOx possesses high theoretical capacity and shows excellent cycle performance; however, the low initial coulombic efficiency and poor electrical conductivity limit its applications in real batteries. In this study, electrodes were fabricated using two different conductive agents, and the resulting physical and electrochemical properties were analyzed. SEM observations confirmed the formation of a CNT conductive network throughout the electrodes, while the electrical conductivity contributed to the electrode was confirmed by impedance measurements. Thus, the electrode fabricated with the CNT conductive agent showed greater capacity and superior cycle performance than did the electrode fabricated using the DB conductive agent.

• Journal of the Korean Society of Safety
• /
• v.38 no.5
• /
• pp.8-14
• /
• 2023

Lithium ions can induce the thermal runaway phenomenon and lead to reignition due to electrical, mechanical, and environmental factors such as high temperature, smoke generation, explosions, or flames, which is extremely likely to create safety concerns. Therefore, one of the ways to improve the flame retardancy of the electrolyte is to use a flame-retardant additive. Comparing the associated characteristic value of existing substances with the required experimental value, it was found that these values were either considerably different or were not documented. It is vital to know a substance's combustion characteristic values, flash point, explosion limit, and autoignition temperature (AIT) as well as its combustion characteristics before using it. In this research, the flash point and AIT of materials were measured by mixing a highly volatile and flammable substance, diethyl carbonate (DEC), with flame-retardant dimethyl methylphosphonate (DMMP). The flash point of DEC, which is a pure substance, was 29℃, and that for DMMP was 65℃. Further, the lower explosion limit calculated using the measured flash point of DEC was 1.79 Vol.%, while that for DMMP was 0.79 Vol.%. The AIT was 410℃ and 390℃ for DEC and DMMP, respectively. In particular, since the AIT of DMMP has not been discussed in any previous study, it is necessary to ensure safety through experimental values. In this study, the experimental and regression analysis revealed that the average absolute deviation (ADD) for the flash point of the DEC+DMMP DEC+DMMP system is 0.58 sec and that the flash point tends to increase according to changes in the composition employed. It also revealed that the AAD for the AIT of the mixture was 3.17 sec and that the AIT tended to decrease and then increase based on changes in the composition.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.1
• /
• pp.80-84
• /
• 2005

An experiment was conducted to study the performance, carcass traits, serum lipid profile and immune competence in commercial broilers (2 to 42 d of age) fed graded levels (25, 50, 75 and 100%) of finger millet (FM) (Elusine coracana) in place (w/w) of yellow maize (YM). Each diet was fed to eight replicates (five female Vencobb broilers/replicate) housed in stainless steel battery brooders. The estimated metabolizable energy content of FM was about 540 kcal less than the YM. FM contained more protein (10.42 vs. 9.05%) and fibre (9.52 vs. 2.24%) compared to YM. Body weight gain, ready to cook yield, relative weights of giblet, liver, intestine and length of intestine at 42 d of age was not affected due to replacing YM with FM. But, the feed efficiency decreased in broilers fed diets containing 75 and 100% FM in place of YM at both 21 and 42 d of age. The amount of fat deposited in abdominal area decreased and the relative weight of gizzard increased with increase in level of FM in the diet. The serum HDL cholesterol at 21 and 42 d of age and serum triglycerides at 42 d of age decreased with increase in level of FM in diet. The relative weight of spleen and antibody titers against sheep red blood cells (SRBC) at 5 d post inoculation (PI) decreased in broilers fed FM at 100% of YM. However, the relative weight of bursa, SRBC titers at 10 d PI, antibody titers against ND virus and mortality were not affected due to incorporation of FM in place of YM in diet. The fat content in thigh muscle and liver decreased, while the protein content in these tissues increased with increase in the level of FM in broiler diet. Based on the results, it may be concluded that YM can be replaced with FM up to 25% on weight basis without affecting weight gain, carcass yields and immunity in commercial broiler diet (up to 42 d of age). Further, inclusion of finger millet reduced the fat deposition in thigh muscle, liver and in abdominal area compared to those fed maize as the principal source of energy.

• Journal of Veterinary Clinics
• /
• v.7 no.1
• /
• pp.429-438
• /
• 1990

The cytochemical characteristics of the hematopoietic cells in blood and bone marrow from 3 clinically healthy dogs were examined using a battery of cytochemical stains. Alkaline phosphotase activity was demonstrated in eosinophilic series and occassionally in progranulocytes. A variety of cells exhibited acid phosphatase activity, but tartrate-resistant acid phosphatase activity was seen only in eosinophilic series. Peroxidase activity was observed in myeloblasts to segmented cells of granulocytic series and in monocytes. ${\alpha}$-naphthyl acetate esterase activity was found in monocytes and occassionally in lymphocytes. Naphthyl-AS-D-chloroacetate esterase marked neutrophilic series from myeloblasts to segmented cells. ${\beta}$-Glucuronidase activity was detected in a variety of cells except the cells of erythrocytic series. Periodic acid Schiff stain-positive granules were demonstrated in the neutrophilic and eosinophilic series from myelocytes to segmented cells and in monocytes and occassionally in lymphocytes. Sudan black B stain-positive granules marked granulocytic series from myeloblasts to segmented tells and monocytes.